ページ1に含まれる内容の要旨
Users Manual
ページ2に含まれる内容の要旨
2 SAFETY PRECAUTIONS The lightning flash with arrowhead symbol within an equilateral trian- gle is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute risk of electric shock to persons. The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servic- ing) instructions in the literature accompanying the prod
ページ3に含まれる内容の要旨
3 TABLE OF CONTENTS SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 DEFINITION OF TERMS . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
4 IMPORTANT SAFETY INSTRUCTIONS POWER SOURCES This unit operates on a supplied AC adaptor, car adaptor and chargeable batteries. Make sure that the input voltage of the AC adaptor is in line with the local volt- age. Otherwise, the AC adaptor and unit may be damaged. Do not touch the AC adaptor with wet hands to avoid electric shocks. When connecting with car power (cigaratte lighter) adaptor, be sure the input voltage of the adaptor is identical with car voltage. Unplug the AC adaptor from the
ページ5に含まれる内容の要旨
5 IMPORTANT SAFETY INSTRUCTIONS is dust on the pickup lens, use a cleaning disc to clean them. Please refer to the operation instructions of the cleaning disc you bought. WHEN USING HEADPHONES To avoid hearing damages caused by sudden high volume, keep the volume at the lowest level before play back. Keep volume lower to protect your ears. Never wear headphones when driving or riding bicycle so as to avoid traffic accidents.
ページ6に含まれる内容の要旨
6 IMPORTANT SAFETY INSTRUCTIONS (1) Read instructions - All the safety and operating instructions should be read before the product is operated. (2) Retain instructions - The safety and operating instructions should be retained for future reference. (3) Warnings - All warnings on the product and in the operating instructions should be adhered to. (4) Follow instructions - All operating and use instructions should be followed. (5) Cleaning - Unplug this product from the wall outlet before cleanin
ページ7に含まれる内容の要旨
7 IMPORTANT SAFETY INSTRUCTIONS overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. (14) Overloading - Do not overload wall outlets, extension cords, or integral conven- ience receptacles as this can result in a risk of fire or electric shock. (15) Object and Liquid Entry
ページ8に含まれる内容の要旨
8 FEATURES 1. HIGH DEFINTION The unit adopts MPEG2 coding format and brings the horizontal resolution over 500 lines. 2. UNIQUE FUNCTIONS Multi - angle and multi - language brings unique trick functions. Parental lock makes it easy to control the content of discs. 3. ZOOM It can enlarge pictures twice or three or four times the original size. 4. MULTI - FUNCTIONS Fast forward, fast reverse, slow play, frame play, repeat play and program play. 5. TIME SEARCH It can search a specific part on a dis
ページ9に含まれる内容の要旨
9 DEFINITION OF TERMS TITLE The images or music of a DVD are divided into some units, among which title is the biggest one. To an image in video software, title is movie, to a piece of music in audio software, it is music. ´ CHAPTER It is smaller than title among the units of a DVD. A title is made up of several chapters, and each chapter has a number for search. But some discs may not have numbered chapters. TRACK The music in a CD. Each track has a number for search. STRUCTURE OF DVD STRUCTURE
ページ10に含まれる内容の要旨
10 NAME OF PARTS MAIN UNIT (1) TFT LCD (13) TITLE (2) SPEAKER (14) MENU (3) PUSH OPEN (15) LOCK (4) POWER ON/CHG INDICATOR (16) VOLUME (5) REMOTE SENSOR (17) PHONES JACK (6) PLAY (18) AUDIO OUT (7) PAUSE (19) VIDEO OUT (8) STOP (20) VIDEO/TFT (SLIDE SWITCH)* (9) OK (21) COAXIAL OUT (10) RETURN (22) DC IN (11) MONITOR & / (23) POWER ON/OFF (12) DIRECTION BUTTONS * The slide switch can only be set when power is set OFF.
ページ11に含まれる内容の要旨
11 NAME OF PARTS REMOTE CONTROL (1) OSD (15) A-B REPEAT (2) SUBTITLE (16) ZOOM (3) NUMBER BUTTONS (17) MUTE (4) SETUP (18) TITLE (5) DIRECTION BUTTONS (19) SLOW PLAY (6) PLAY (20) RETURN (7) MENU (21) CLEAR (8) STOP (22) TIME SEARCH (9) PAUSE (23) RESUME (10) FF/FR SEARCH (24) PLAY MODE (11) PREV/NEXT SKIP (25) LANGUAGE (12) AUDIO MODE (26) ANGLE (13) DIGEST (27) REMOTE TRANSMITTER (14) REPEAT
ページ12に含まれる内容の要旨
12 CONNECTIONS B A CONNECT TO POWER A Please make sure that the supplied AC adaptor is in line with the local voltage. Connect the supplied AC adaptor to: 1. DC IN on the left side of the unit. 2. Insert one end of the power supply cord into the input jack of the adaptor and the other end into the household mains socket. At this time, the TM CINEMAN can work normally. USE HEADPHONES B Insert headphones into the phones jack of the unit. Turn off the power when inserting or pulling headphones.
ページ13に含まれる内容の要旨
13 CONNECTIONS C D CONNECT TO TV C The AV cords are connected according to diagram C: 1. Mini - plug: connect to the VIDEO OUT jack of the unit. 2. Yellow plug: connect to the VIDEO IN jack of the TV. 3. Mini - plug: connect to the AUDIO OUT jack of the unit. 4. Red - plug: connect to the AUDIO IN R jack of the TV. 5. White - plug: connect to the AUDIO IN L jack of the TV. CONNECT TO TV AND AMPLIFIER D The AV cords are connected according to diagram : 1. Mini - plug: connect to the VIDEO OUT
ページ14に含まれる内容の要旨
14 PREPARATIONS BEFORE OPERATION USE REMOTE CONTROL 1. Refer to the diagram, open the battery compartment of the remote control, insert batteries, then close the compartment. 2. To use the remote control, point it at the remote sensor of the unit. Operates in a range of 5 meters to 60°. 3. Generally, batteries last for about one year, replace the batteries if the remote control does not work. 4. Remove the batteries if remote control is not used for a long time.
ページ15に含まれる内容の要旨
15 PREPARATIONS BEFORE OPERATION Playable Discs TYP LOGO CONTENT SIZE PLAYING TIME DVD Audio + Video about 2hrs (Motion Pictures) 12 cm (single-side disc) about 4hrs (double-side disc) about 80 min. (single-side disc) 8 cm about 160 min. (double-side disc) CD Audio 12 cm about 74 min. 8 cm about 20 min. MP3 Audio 12 cm about 600 min. Kodak Picture CD Photos 12 cm - The marks shown in the following chart are used in the maunal MARK INDICATION DVD Functions of DVD CD Functions of CD
ページ16に含まれる内容の要旨
16 BASIC OPERATIONS A B BEFORE OPERATION A 1. Turn on the power. 2. Press the lock switch to open the cabinet cover. 3. Set POWER ON. 4. Turn VOLUME to adjust volume (including when using headphones). 5. When the unit is connected to a TV or an amplifier, adjust the volume accord- ing to owner’s manual and set TV to AV mode. LOAD DISC B 1. Press OPEN to open the disc tray. 2. Hold the edge of the disc to put it in the center with the printed side up. 3. Close the disc tray, wait until it click
ページ17に含まれる内容の要旨
17 BASIC OPERATIONS TFT PICTURE ADJUSTMENT 1. If you feel the brightness is unsuitable during playback, press MONITOR button to select bright adjustment and press or buttons until moderate bright is achieved. 2. If you feel color is unsuitable during playback, press MONITOR button to select color adjustment and press or buttons until moderate color is achieved. 3. Press MONITOR button to select display mode selection and press or buttons buttons to select: Full mode,Normal mode and Z
ページ18に含まれる内容の要旨
18 BASIC OPERATIONS DVD CD available if the disc was created with PLAY DISCS that particular feature (i.e., if you 1. Load a disc and press (PLAY) to play the disc. select the Subtitle icon, you won’t be 2. Stop playback. Press . able to change the subtitle language 3. Remove the disc and switch off the unless the author of the disc created unit. the disc with subtitles). You have to press this ““ button The invalid symbol “ “ appears on twice to stop the playback of DVD the screen when you
ページ19に含まれる内容の要旨
19 BASIC OPERATIONS 3. Press the or buttons to go to through the audio languages that the next or previous title. are available on the disc until the Note: Some discs only have one audio language you want to use title. appears in the text box. Audio will be played in that language. Select a Chapter 4. To make the Display disappear, OSD Because DVD discs use digital tech- press the button on the nology, a title can be divided into indi- remote. vidual chapters (similar to tracks on a Note:The
ページ20に含まれる内容の要旨
20 BASIC OPERATIONS turned off, the subtitle language will To Use Repeat: revert to the language setting speci- OSD 1. While a disc is playing, press fied through the DVD player main on the remote to bring up the menu. Display. The subtitle language can also be 2. Highlight the Repeat icon. changed through the DVD player 3. Press the or buttons to scroll menu. through the Repeat options until the Repeat option you want is dis- Changing the Camera Angle played in the text box. Some discs con
