ページ1に含まれる内容の要旨
music hall
dac15.2
digital to analog converter
INSTRUCTION MANUAL
music hall
http://www.musichallaudio.com
ページ2に含まれる内容の要旨
Congratulations on Your Purchase You have selected a state of the art digital-to-analog converter (DAC). Each component chosen for assembly and construction of the music hall dac15.2 was selected to provide you with superior performance and the highest level of sound reproduction available today. We know of no digital-to-analog converter that costs as much to produce that sells for so little. Please take a few moments to read over the instruction manual to ensure that you get the best performanc
ページ3に含まれる内容の要旨
6. Climate The unit has been designed for use in moderate climates. Do not attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95 degrees Fahrenheit (35 degrees Celsius). 7. Rack and Stands Place the unit on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. We recommend only using stands approved for use with audio equipment. 8. Cleaning Unplug the unit from the mains supply before cleaning. The case should nor
ページ4に含まれる内容の要旨
Getting Started Thank you for purchasing the music hall dac15.2. The dac15.2 is a solid-state digital- to-analog converter (DAC) designed for the music lover. We chose a select group of technologically advanced components to create this sophisticated digital-to-analog converter. The dac15.2 can accept any coax (s/pdif), USB, or optical (toslink) digital input from one of music hall's compact disc players, a CD/DVD transport, iPod transport, computer, media server, Sonos, Squeezebox, DVD in stere
ページ5に含まれる内容の要旨
R ANALOG OUT OPTICAL COAXIAL L OUT USB 12V 12V DC DC R IN designed and developed in the USA Connecting to the Mains - Plugging In Check that the Power Switch on the front of the dac15.2 is in the off position. Look at the voltage selector slider on the back of the unit and confirm that it is set for the correct voltage: (~115V USA/~230V Europe). Connect the low voltage plug from the power supply to 12V DC socket on the dac15.2 before connecting to the mains. Digital In - Connecting Source Compon
ページ6に含まれる内容の要旨
Digital Out COAXIAL OUT S/PDIF output for use with other digital components. This output converts the USB and OPTICAL (toslink) input signal to an S/PDIF output. Using the dac15.2 power - on/off Turn on the dac15.2. If no digital input is active the locked light will not light. input Use the input switch to select desired input. Enjoy. power locked usb on coaxial off optical dac dac15.2 15.2 digital digital tto o a analog nalog c con onv ve erter rter Troubleshooting If no sound comes out of the
ページ7に含まれる内容の要旨
If you are using a USB connection, it is necessary for the computer to recognize the dac15.2 as a connected device. Check in the computer's control panel under USB devices and see if the dac15.2 is selected. If not, with both the dac15.2 and your computer powered up, remove the USB cable from the computer and then re-insert it. Watch the computer monitor for an indication it has found the hardware. Apple computers may not automatically recognize the dac15.2. Apple users check your System Prefere
ページ8に含まれる内容の要旨
Guarantee This entitles you to have the music hall dac15.2 repaired or replaced, at our discretion, free of charge for one year after purchase, at any authorized music hall dealer, provided the unit was purchased from an authorized dealer. Your original sales receipt is used as proof of purchase date. Music hall can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorized repair and or adjustment. Neither can music hall accept respon