ページ1に含まれる内容の要旨
7200
ATB Printer
User's Guide
Part No. 111017 Rev. D
ページ2に含まれる内容の要旨
7200 Contents... Introduction.............................................................. i 1. Before Using the ATB Printer......................... 1-1 1.1 Checking the Package ....................................................... 1-2 1.2 Names and Functions ........................................................ 1-3 2. Operation.......................................................... 2-1 2.1 Connecting the ATB Printer.............................................. 2-2 2.2 Turning the Pow
ページ3に含まれる内容の要旨
7200 (Page is intentionally blank) Operation Manual
ページ4に含まれる内容の要旨
7200 INTRODUCTION NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi
ページ5に含まれる内容の要旨
7200 Product Safety This manual uses a variety of terms and symbols to ensure the safe operation of the product, help prevent hazards to yourself and others, and help prevent property damage. The following describes terms, symbols, and meanings used in this manual. Before reading this manual, please familiarize yourself with the terms and symbols below. Terms Ignoring this cautionary note and handling the product WARNING improperly may result in death or serious injury. Ignoring this warning and
ページ6に含まれる内容の要旨
7200 INTRODUCTION Safety Considerations READ THIS PAGE BEFORE INSTALLING OR USING THIS PRODUCT! WARNING n Do not remove the cover or attempt any repairs on this product. There is risk of electric shock. n Do not place heavy materials on the power cable. Do not bend or twist the power cable. The cable may get damaged, causing fire or electric shock. n Do not use damaged cables or broken connector or power plugs. There is risk of fire or electric shock. n Use only power voltages specified for this
ページ7に含まれる内容の要旨
7200 Caution Label This product comes with a caution label attached as described below. Caution Label CAUTION Falling covers may cause injury. Do not take your hands off covers when opening and/ or closing them. Operating Environment Location • Do not place the product in direct sunlight or near heating sources such as stoves or heaters. • Do not place the product in a dusty or humid environment. • Do not place the product under strong shock or vibration. • Do not place the product in a strong m
ページ8に含まれる内容の要旨
7200 INTRODUCTION Space Required Back Right Left Front 8.3 in 9.8 in (250mm) 9.8 in (250mm) (210mm) Top Left Right 8.3 in 9.8 in (250mm) 9.8 in (250mm) (210mm) inches (millimeters) v Operation Manual 9.8 in (250mm) 21.6 in (550mm) 15 in (380mm) 9.8 in (250mm) 5.9 in (150mm)
ページ9に含まれる内容の要旨
7200 Dimensions and Weight • 8.3 inches (210mm) W x 21.6 inches (550mm) D x 15.0 inches (380mm) H • Less than 35.3 lb. (16 kg ) Temperature and Humidity Make sure that the following temperature and humidity conditions are met : • Ambient temperature: 41 to 104 degrees F (5 to 40 degrees C) • Ambient humidity: 20% to 90% RH (relative humidity) — no condensation. Notes on the Operating Environment When installing the product where the ambient humidity is 30% or less, it is recommended that you u
ページ10に含まれる内容の要旨
7200 INTRODUCTION Available Types The Sigma Data — 7200 ATB printer is classified into 2 types, i.e., Type B and Type D. Refer to the printer types listed below when reading this manual. Type Printing Method Number of Bins Type B Direct thermal only Two internal bins and one external bin (BIN 3) Type D Direct thermal or Two internal bins and one external bin (BIN 3) thermal transfer Note: Type B cannot be used for Thermal Transfer printing with a transfer ribbon. vii Operation Manual
ページ11に含まれる内容の要旨
7200 NOTES (page is intentionally blank) viii Operation Manual
ページ12に含まれる内容の要旨
7200 BEFORE USING THE S7200 1. Before Using the ATB Printer Operation Manual 1-1
ページ13に含まれる内容の要旨
7200 1.1 Checking the Package The ATB printer and accessories are packed in the same box. Carefully remove the printer and accessories from the box and packing materials, then check that the package contains all of the items needed for operation that are pictured below. The package also contains a warranty card and may have other information sheets. ATB Printer AC Power Cable Keys Cleaning Kit Operation Manual 1-2 Operation Manual
ページ14に含まれる内容の要旨
7200 BEFORE USING THE S7200 1.2 Names and Functions This section explains the names and functions of each part. 1.2.1 Names of Parts A — Operator panel B — Cover lock E — Feed knobs D — Output stacker C — Inserter F — BIN 1, BIN 2, and BIN 3 load knobs G — BIN 1 O — Thermal transfer take-up reel H — BIN 2 I — Thermal print head N — BIN 3 P — Thermal transfer supply reel J — Interface connector M — Interface connector (Downline) (Host) HOST DOWNLINE K — Power switch L — Power connector Operation
ページ15に含まれる内容の要旨
7200 1.2.2 Functions No. Names Functions A Operator panel Houses the LEDs and keypad needed to operate the ATB printer. B Cover lock Locks the side cover. (Use the key to open the cover.) C Inserter Used to insert single coupons (one at a time). D Output stacker Receives ejected coupons, print-side up. (Has a capacity of 100 coupons.) E Feed knobs Used to remove jammed coupons. F BIN 1, BIN 2, and BIN 3 Used to load coupons into the feed rollers for load knobs each bin. G BIN 1 Used to hold coup
ページ16に含まれる内容の要旨
7200 BEFORE USING THE S7200 1.2.3 Operator Panel Operator Panel Layout LEDs ONLINE ONLINE DATA DATA ERROR ERROR MODE MODE LCD 16 columns by 2 rows ONLINE ONLINE RESET RESET EJECT EJECT Keys ENTER ENTER QUIT QUIT éé SET UP SET UP CLEANING CLEANING TEST TEST çç èè êê LED Functions LEDs indicate printer status by turning on, turning off, or blinking. ONLINE — The ATB printer is online. The ATB printer can ON receive and print data from the terminal. The printer is set online when the power is turne
ページ17に含まれる内容の要旨
7200 Key Functions Each key has two different functions for different operating modes. Function indicated at the top Enabled in ONLINE or OFFLINE mode. Function indicated at the bottom Enabled in TEST, SETUP, or CLEANING modes. Functions ONLINE ONLINE ONLINE key Cycles the ATB printer between ONLINE (ticketing enable) and ENTER ENTER OFFLINE (local) mode. If the ATB printer is online, pressing this switch sets it offline. If the ATB printer is offline, pressing this switch sets it online. E
ページ18に含まれる内容の要旨
7200 BEFORE USING THE S7200 TEST TEST TEST key In OFFLINE (local) mode, pressing this key sets the ATB printer çç to TEST mode (maintenance mode). ç ç Pressing this key moves the cursor on the LCD panel to the left. Automatic repeat when held down. SET UP SET UP SET UP In OFFLINE (local) mode, pressing this key sets the ATB printer key èè to SETUP mode (maintenance mode). è è Pressing this key moves the cursor on the LCD panel to the right. Automatic repeat when held down. CLEANING In OFFLINE (l
ページ19に含まれる内容の要旨
7200 NOTES (page is intentionally blank) 1-8 Operation Manual
ページ20に含まれる内容の要旨
7200 OPERATION 2. Operation Operation Manual 2-1
