ページ1に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual
Windows-Based Terminal
User’s Manual
ページ2に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual TABLE OF CONTENTS CHAPTER 1 License Agreement ……………………………………….………………………….……..….2 CHAPTER 2 Product Review………………………………………….………………….……….……….….5 2.1 WBTs………………………………………………………………………….….…………….….5 2.2 Terminal Specifications…………………………………………………….…………………….5 2.3 Terminal Features……………………………………………………………….…………….….6 2.4 Terminal Overview……………………………………………………….……………………….6 2.4.1 Connecting the Terminal……………………………………………………………..….6 2.4.2
ページ3に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 4.7 Microsoft Internet Explorer Connection.......................................................................…..44 4.7.1 To Make a New Microsoft Internet Explorer Connection ...................................…..44 4.7.2 To Start a Microsoft Internet Explorer Connection.............................................…..48 4.8 Microsoft Media Player………………………………………………………………………48 4.8.1 To Make a New Microsoft Media Player Connect
ページ4に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual CHAPTER 8 Desktop Mode 8.1 Control Panel ………………………………………………………………………………….80 8.1.1 Display Properties ………………………………………………………………………80 8.1.2 General Properties ……………………………………………………………………..81 8.2 Add a Connection …………………………………………………………………………….81 8.3 Advanced Function on Desktop Mode…………………………………………………82 8.3.1 Task Manager…………………………………………………………………………..82 8.3.2 Task Bar………………………………………………………
ページ5に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual Trademarks ICA 3 is a registered trademark and MetaFrame is a trademark of Citrix Systems Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other products are trademarks and/or registered trademarks of their respective companies. The Energy Star emblem does not represent endorsement of any product or service. Specifications subject to change without notice. FCC Statement This equipment has been tested and found to comply with the li
ページ6に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual License Agreement YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS EQUIPMENT WHICH CONTAINS SOFTWARE IN A NON-VOLATILE FORMAT AND CERTAIN OTHER INTELLECTUAL PROPERTY (HEREAFTER “FIRMWARE”). USING THIS EQUIPMENT INDICATES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS. Grant You may use the Firmware in or in conjunction with the Equipment as provided to You. You may transfer ownership of the Equipment, including the right to us
ページ7に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual EULA for Microsoft® Windows® CE Operating System for Windows-based Terminal Devices Version 1.5 IMPORTANT—READ CAREFULLY This End User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) and the manufacturer (MANUFACTURER) of the special purpose computing device (SYSTEM) you acquired which includes certain Microsoft software product(s) installed on the SYSTEM and/or included in the SYSTEM package (SOFTWARE). The SO
ページ8に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual You may not reverse engineer, de-compile, or disassemble the 1.Grant of License SYSTEM SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding SOFTWARE includes software already installed on the SYSTEM this limitation. (SYSTEM SOFTWARE) and, if included in the SYSTEM package, software contained on the CD-ROM disk and/or floppy disk(s) labeled "Desktop Software for Microsoft Windows CE" (DESKTOP Singl
ページ9に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual concerning this EULA, or if you desire to contact designed, manufactured, or intended for use or resale as on-line MANUFACTURER for any other reason, please refer to the control equipment in hazardous environments requiring fail-safe address provided in the documentation for the SYSTEM. performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems,
ページ10に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 2 Product Overview 2.1 WBTs WBTs (Windows-based Terminals) are designed to connect to WTS (Windows Terminal Server) servers via RDP (Remote Desktop Protocol), or Windows NT applications server via ICA (Independent Computing Architecture). RDP is the Windows CE-based protocol for connecting to Windows terminal servers. ICA is a distributed presentation services protocol for Windows NT server, allowing an application's user interface to execute on a Windows-based t
ページ11に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 2.3 Terminal Features Physical Characteristics Height 232 mm (11.21 in) Width 51 mm (2.08 in) Depth 202 mm (10.41 in) Net Weight 2.20 kgs (4.85 lbs) Power Cord 6 ft (1.83m) Environmental Operating Temperature 5 to 40 (41 to 104 ) Non-operating Temperature -40to 60 (-40 to 150 ) Operating Humidity 20% to 80%, non-condensing Operating Altitude 0 to 10,000 ft ASL Nonoperating Altitude 0 to 40,000 ft ASL Regulatory EMC Terminal/Power Brick FCC B, CE, CB,
ページ12に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual Power Switch & LED LAN Active Smart Card Slot Smart Card LED Keyboard USB Mouse 2.4.2 Connector Descriptions LAN LED Indicators This LED indicates the link (amber), activity (amber) status of network conditions. The detailed information is explained as follows: Link Indicator (amber) This LED lights to indicate a successful network connection. Activity Indicator (amber) This LED lights when there is network packets sent or received through the RJ-45 po
ページ13に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual LAN PCMCIA SLOT VGA PCI SLOT SERIAL 1 SERIAL 2 PARALLEL MIC AC SPEAKER VGA Connector This connector is for displaying on a standard VGA compatible device. Serial Port Connectors (COM1, COM2) These connectors can be used for the serial device such as a modem device. Parallel Port Connector This connector can be used for a printer connection. Power Connector This connector is for connecting the power cord with the terminal and the AC outlet. PCMCIA Slot This slot
ページ14に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual Before you use the CE5.0… 1. Get the device and Boot loader ready For using the F/W of CE5.0, You must update the Boot loader for CE5.0 to ensure all of the devices and function normally. 2. The differences between CE4.2 and CE5.0 Two user interface styles supported a. The CE5.0 support two user’s modes, WBT mode and Desktop mode, Users can switch from one to another in Control Panel. More device drivers have been supported in CE5.0
ページ15に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 3 Initial Terminal Setup The Setup Wizard is used for initial setup of the terminal's properties. The wizard runs when: You turn on your terminal for the first time. Your terminal has been restarted with selecting factory default setting. A new image has been downloaded to your terminal. 3.1 Hot-keys Functions Ctrl+Alt+Up/Down Arrow Use this function to switch between Active Connections. Ctrl+Alt+End: Use this function to go back to the Terminal Con
ページ16に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 3.2.1 Network Configuration Network attached device must contain a unique network identifier. If the network is using TCP/IP as a communication protocol, these identifiers are called IP addresses. The following series of screens will allow you to choose from two different methods of assigning the IP addresses. 3.2.1.1 Use the IP information supplied by DHCP If your network provides DHCP (Dynamic Host Configuration Protocol) service and you want it to provide th
ページ17に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 3.2.1.2 Specify a static IP address If the method you selected on the prior screen was to enter a static IP address, the below screen will appear. You will be required to enter the following information onto the screen. IP address Required for identifying this unit to the network. The format will follow the standard addressing format. Subnet Mask Required for designating which network the IP address is a part of. Gateway Optional address which identifies th
ページ18に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 3.2.3 Alternative Display Settings The monitor support several kinds of resolutions. If you want to test it, choose the desired resolution from the list box and click Test. Desktop Area and Refresh Frequency If the screen image tests OK, the monitor will support the selected resolution. After the system implement testing new mode as user set up. The system will notify user “did you see the test image properly”. 13
ページ19に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual 3.2.4 Local Printer Setup The terminal supports Local Print. If you want to connect this terminal with a Local Printer, then click OPEN. If not, then click NEXT. Local Printer Setup After click OPEN you can see the Add Printer page then click OPEN again you can see the Select the printer Port page. 3.2.5 Select the Printer Port Select one of the ports, LPT1, COM1 or COM2 port that you want to use to communicate with your local printer. Or you can select Network
ページ20に含まれる内容の要旨
BOSSTX2 CE 5.0 User's Manual Select the Printer Port (For LPT1) Select the Printer Port & BAUD RATE (For COM1 or COM2) Select the Network Printer 15
