ページ1に含まれる内容の要旨
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
4” MECHANISM, WITH AVAILABLE CUTTER
FTP-641MCL301/302
n OVERVIEW
This thermal printer (driven by 24 VDC) and cutter provide high
speed printing for 4-inch wide paper (114 mm). This printer is small
in size, light weight, and has low power consumption. The print head
features open construction for easy maintenance.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, label printers, measuring devices and
ページ2に含まれる内容の要旨
FTP-641MCL301/302 n DESIGNATION Item Part number Front paper insertion type FTP-641MCL301 Printer mechanism Rear paper insertion type (supports thick paper) FTP-641MCL302 Cutter FTP-641CT001 FTP-621DCL012 Interface board Micro Controller Unit FTP-621CU102 LSI Gate Array FTP-633GA101 n GENERAL SPECIFICATIONS Item Specifications Printing method Thermal-sensitive line dot method Dot structure 832 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots
ページ3に含まれる内容の要旨
FTP-641MCL301/302 (Continued) Item Specifications 2 24 VDC ± 5%, average:* 0.33 (1.72) A (at 25 mm/s printing speed, 25% printing ratio) For head 0.75 (3.01) A (at 50 mm/s printing speed, 25% printing ratio) 3.09 (5.58) A (at 100 mm/s printing speed, 25% printing ratio) Power supply ( ): Peak For motor 24 VDC± 5%, 1.0 A maximum For logic 5 VDC ± 5%, 0.5 A maximum Weight Mechanism with cutter: approximately 640 g Interface board: approximately 100g Mechanism + cutter 161 (W) × 60 (D) × 71.0
ページ4に含まれる内容の要旨
FTP-641MCL301/302 n DIMENSIONS Printer mechanism with cutter 2.5 (Mounting hole) JAPAN 25.4 35.5 (Mounting hole) 68 (At cutter open) 40.5 7.5 (300) 60 Unit: mm 4 2-M3 Burring Mounting screw 161 21.9 135.2 (Mounting hole) 14.2 66.6 (Center of paper & connector) 71 (76) Y-Y SECTION Y Paper insertion Y 123.8 Paper insertion Note: All dimensions are nominal value. 300 12 11.8
ページ5に含まれる内容の要旨
FTP-641MCL301/302 Interface board 139.7 129.6 113.1 73.7 22.9 14.0 4—ø3.6 (5.1) CN9 CN3 CN4 CN2 CN7 88.9 28.0 78.8 CN11 25.4 CN5 CN6 CN1 CN10 (5.1) (5.1) 14.0 31.8 15.3 (5.1) (5.1) 88.9 17 Height of devices side 1.6 23.6 5 Height of solder side Unit: mm n INTERFACE, COMMAND, OPTIONS Please refer to the FTP-621DCL002/012 DATA SHEET for Interface, Command, and Options. 5
ページ6に含まれる内容の要旨
FTP-641MCL301/302 Japan Europe Fujitsu Components Europe B.V. Fujitsu Component Limited Gotanda-Chuo Building Diamantlaan 25 2132 WV Hoofddorp 3-5, Higashigotanda 2-chome, Shinagawa-ku Netherlands Tokyo 141, Japan Fujitsu Components Tel: (81-3) 5449-7010 Tel: (31-23) 5560910 International Fax: (31-23) 5560950 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Email: info.marketing@fceu.fujitsu.com Headquarter Web: www.fceu.fujitsu.com Web: www.fcl.fujitsu.com Offices North and South America
