ページ1に含まれる内容の要旨
HP PhotoSmart P1100 Color InkJet Printer
Network Guide for Windows
ページ2に含まれる内容の要旨
Table of Contents 1 Using Your Printer on a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Locally Shared Printer Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setting Up a Locally Shared Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ3に含まれる内容の要旨
1 Using Your Printer on a Network To share your printer on a network, you must connect the printer to your network using one of the following methods. Before you set up your printer, check that your computer is fully set up, operational, and meets the minimum system requirements listed in “System Requirements” in your HP PhotoSmart P1100 Printer User’s Guide. Your HP PhotoSmart P1100 printer can be shared over a network in three different ways: • Locally Shared: Share your printer from a netwo
ページ4に含まれる内容の要旨
• Client Server Network Connection: Connect your printer to a network via the parallel port of an HP JetDirect External Print Server and share the printer from a Windows NT 4.0 or NetWare 3.12, 4.11, or 5.0 server on your network. Clients print through a Windows NT or NetWare server. See “Client Server Network Connection” on page 10 for details. Note: Clients on a network do not have access to the CompactFlash or SmartMedia card slots. Clients only have the capability to print. Host PCs in a
ページ5に含まれる内容の要旨
Setting Up a Locally Shared Printer 1 Set up the printer. Follow the instructions on the installation poster (included in the box). Note: Make sure you do not have any peripheral devices, such as scanners, switch boxes, backup units, etc. installed between the printer and the computer. 2 Install the printer software on the host computer, and share your printer on the network. See the table below to find instructions for your operating system. 3 Install the printer software on each of the clien
ページ6に含まれる内容の要旨
Setting Up Windows 95 and Windows 98 Hosts Preparing your Computer to Share Your Printer on the Network 1 Turn on the host computer and the printer. 2 From the Windows Start menu, select Settings, then select Control Panel. 3 Double-click the Network control panel. 4 Click the File and Print Sharing button. 5 If it is not already checked, check I want to be able to allow others to print to my printer(s). 6 Click OK to close the File and Print Sharing dialog box, then click OK to close the Networ
ページ7に含まれる内容の要旨
Sharing Your Printer on the Network 1 From the Windows Start menu, select Settings, then select Printers. 2 Right-click the HP PhotoSmart P1100 printer icon and choose Sharing from the pop-up menu. 3 Select Shared As and enter the name you want to use for your printer on the network. Use a name of eight characters or less. If you want to restrict access to your printer, enter a password in the Password field; users will need to enter this password in order to print to your printer. Note: See y
ページ8に含まれる内容の要旨
2 Close any virus protection programs or other software programs that are open and running on the computer, except the HP PhotoSmart P1100 Sofware Installer and Windows Explorer. 3 Using the installation poster (included in the box), follow the software installation instructions for your operating system. Installing the Printer Software on Each Client Computer Make sure you have installed printer software on the host and shared the printer before you install the printer software on the client.
ページ9に含まれる内容の要旨
4 Enter the path or queue name of the printer. For example, type: \\HostComputerName\PrinterName or \\ServerName\QueueName, then click Next. or Click Browse to in Network Neighborhood to locate the print server and printer, then click Next. 5 Click the Have Disk button, and insert the HP PhotoSmart P1100 printer software CD into your CD-ROM drive. Note: If the CD-ROM autoplays and starts an installation program, exit that program before continuing. 6 In the Install From Disk dialog box, click B
ページ10に含まれる内容の要旨
4 Enter the path or queue name of the printer. For example, type: \\HostComputerName\PrinterName or \\ServerName\QueueName or Browse the Shared Printers list box to locate and select the print server and printer. Note: If the host computer is not a Windows NT4.0 computer, you will need to install the printer software from the printer software CD or from a shared network drive. 5 Choose whether or not to set the new printer as your default printer, then click Next, then click Finish. 6 If prompt
ページ11に含まれる内容の要旨
Operating Systems and Print Servers for the Peer-to-Peer Connection The following client operating systems and print servers are supported: Operating Systems Print Servers • Windows 95 • HP JetDirect 170X • Windows 98 • HP JetDirect 300X • Windows NT 4.0 Setting Up a Peer-to-Peer Printer Connection 1 Set up the printer. Follow the installation instructions included in the box. Be sure to connect the printer to the HP JetDirect External Print Server using a bi-directional IEEE 1284-compliant par
ページ12に含まれる内容の要旨
Installing the Printer Software on Each of the Clients 1 Install the HP JetDirect port software on each client according to the instructions included with the print server. 2 Close any virus protection programs or other software programs that are open and running on the computer, except the HP PhotoSmart Software Installer and Windows Explorer. 3 Using the installation poster (included in the box), follow the software installation instructions for your operating system. Be sure to select the
ページ13に含まれる内容の要旨
Operating Systems for the Client Server Connection Installation instructions for the supported operating systems can be found on page: Server Operating Systems Client Operating Systems NetWare 3.12, 4.11, or 5.0: See page 12. Windows NT 4.0: See page 6. Windows NT 4.0: See page 11. Windows 95 or Windows 98: See page 6. Setting Up a Client Server in Windows NT 4.0 1 Set up the printer. Follow the instructions and be sure to connect the printer to the HP JetDirect External Print Server with a para
ページ14に含まれる内容の要旨
3 Install the printer software on the Windows NT 4.0 server and share your printer on the network. Follow the instructions on the installation poster (included in the box). Be sure to select the port you configured when you set up the HP JetDirect External Print Server. 4 Install the printer software on each of the client computers. See “Installing the Printer Software on Each Client Computer” on page 6 to find instructions for your operating system. Setting Up a Client Server in NetWare • R
ページ15に含まれる内容の要旨
Appendix Language Codes If you are doing an Add Printer Installation in Windows 95, Windows 98, or Windows NT 4.0, you need to browse to the INF file for your operating system’s language. • Windows 95 and Windows 98: The INF file is in the path: [CD drive letter]: \[language code]\9xinf\HPDJ.INF • Windows NT 4.0: The INF file is in the path: [CD drive letter]: \[language code]\nt4inf\HPDJ.INF Find the language code for your operating system’s language in the table below. Language Language code
