ページ1に含まれる内容の要旨
Infoprint Color 1228
Setup Guide
S510-2222-00
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Infoprint Color 1228 Setup Guide S510-2222-00
ページ4に含まれる内容の要旨
Edition: October 2001 © Copyright 2001 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RESTRICTED RIGHTS This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc., Lexington, KY 40550. FCC emissions
ページ5に含まれる内容の要旨
Table of contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v About your printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v Other sources of information . . . . . . . . . . . . . . . . . . . . . . . . . vi Step 1: Unpack your printer . . . . . . . . . . . . . . . . . . . . . . . . . 1 Step 2: Select a location for your printer . . . . . . . . . . . . . . 3 Considering environmental issues . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Step 6: Install printer supplies . . . . . . . . . . . . . . . . . . . . . . 38 Opening the top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Installing the photodevelopers . . . . . . . . . . . . . . . . . . . . . . . .41 Installing the toner cartridges . . . . . . . . . . . . . . . . . . . . . . . . .44 Attaching the Quick Reference booklet sleeve . . . . . . . . . . . .47 Attaching an adhesive operator panel overlay . . . . . . . . . . . .48 Closing the top cover .
ページ7に含まれる内容の要旨
Introduction About your printer Your printer is available in four models: The base printer with 2400 IQ resolution, 64MB of standard memory, one 550-sheet tray, multipurpose feeder, and USB and parallel connectors. Network model with 64MB of standard memory, an Ethernet 10BaseT/100BaseTx print server installed, an additional 550-sheet drawer, and USB and Ethernet connectors. Network internet model with an Network model Base printer ImageQuick firmware card installed. Duplex ne
ページ8に含まれる内容の要旨
Other sources of If you need more information after you have completed setup, refer to the other information printer documentation. Publications CD The Publications CD provides information about loading paper, clearing error messages, ordering and replacing supplies, installing maintenance kits, and troubleshooting. It also provides general information for administrators. Quick Reference The Quick Reference provides easy access to information about loading print media, printing confiden
ページ9に含まれる内容の要旨
Step 1: Unpack your printer CAUTION! The printer weighs 69.9 kg Remove all items from the box except (154 Ib) and requires at least four people the printer. Make sure you have the to lift it safely. Anytime you move or lift following items: the printer make sure you have enough Printer people to help you. Use the handholds on the side of the printer when lifting. Power cord Note: Leave the printer in the box until Four toner cartridges you are ready to install memory options Four ph
ページ10に含まれる内容の要旨
Familiarize yourself with the names and Operator panel locations of items on the front and rear of Top cover and standard output bin your new printer. This will help you during printer setup. We use the same terms throughout this book and on the publications CD. Exit tray (bin 1) Front door Handholds Paper tray Paper size dial Power switch Door release latch High-capacity feeder connector Rear cover Parallel or Ethernet connector Option slot cover Handholds Power cord Duplex unit USB
ページ11に含まれる内容の要旨
Step 2: Select a location for your printer Choosing the correct location for your new printer is vital to ensuring the printer provides you with the quality of service you expect. Consider these factors when selecting a place to set up your printer: The type of environment necessary for optimum printer performance The amount of space required for your printer and all its options Considering When choosing a place to set up the printer, look for: environmental issues A firm, level
ページ12に含まれる内容の要旨
Allowing enough space When choosing a place to set up your printer, be sure to allow enough space for the printer and any options you may have purchased. It’s also important to allow space for proper ventilation around the printer. Base printer When selecting a location for your printer, make sure you have at least the amount of space indicated in the figure. 734.9 mm (29 in.) 102 mm 152.1 mm (5 in.) (6 in.) 1241.8 mm 508 mm (56 in.) 1178.4 mm (26 in.) 329.5 mm (46.5 in.) (13 in.) Select
ページ13に含まれる内容の要旨
Network and internet printers The network and internet models are configured with two 550-sheet drawers. Make sure you have at least the amount of space indicated in the figure. 869.2 mm (34.3 in.) 102 mm 152.1 mm (5 in.) (6 in.) 508 mm 1241.8 mm (26 in.) 1355.8 mm (56 in.) 329.5 mm (53.5 in.) (13 in.) Select a location for your printer 5
ページ14に含まれる内容の要旨
Duplex network printers The duplex network printer is configured with two 550-sheet drawers and an internal duplex unit. Make sure you have at least the amount of space indicated in the figure. 869.2 mm (34.3 in.) 102 mm 329.5 mm (5 in.) (13 in.) 1241.8 mm (56 in.) 508 mm 1355.8 mm (26 in.) 329.5 mm (53.5 in.) (13 in.) Select a location for your printer 6
ページ15に含まれる内容の要旨
Printer with You can add a high-capacity feeder to your printer if you have a printer cabinet high-capacity feeder or if you have a printer stand with optional drawers. When attaching a high-capacity feeder, make sure you provide the additional space indicated in the figure. 1110 mm (43.8 in.) 102 mm (5 in.) 494.2 mm (30 in.) 1241.8 mm 508 mm (56 in.) (26 in.) 17.84.1 mm 329.5 mm (70.4 in.) (13 in.) Select a location for your printer 7
ページ16に含まれる内容の要旨
Step 3: Set up the printer and paper handling options Note: Be sure to set up the items in the Use the following table to locate the order listed in the table. instructions you need to set up your printer and any paper handling options you may have purchased. Topic Go to page... Installing the printer base or cabinet 9 Installing a 550-sheet drawer 10 Positioning the printer 11 Installing an optional duplex unit 12 Installing an optional high-capacity feeder 15 Set up the printer and paper h
ページ17に含まれる内容の要旨
Installing the printer You can purchase an optional printer cabinet or printer base. base or cabinet The instructions for installing the printer cabinet or printer base are the same. To install the printer cabinet: 1 Remove the printer cabinet from the box. 2 Remove all packing material from the printer cabinet. 3 Follow the instructions that came with the option to assemble or prepare the cabinet or base for installation. 4 Place the printer cabinet in the location you have chosen for y
ページ18に含まれる内容の要旨
Installing a Your printer supports a total of up to three optional 550-sheet drawers. 550-sheet drawer 1 Unpack the 550-sheet drawer and remove any packing material. 2 Place the 550-sheet drawer on the optional printer cabinet, optional printer base, or in the location you have chosen for your printer. 3 If you have additional 550-sheet drawers: a Align the positioning posts on the lower drawer with the holes in the 550-sheet drawer. b Lower the 550-sheet drawer into place. Make sure it
ページ19に含まれる内容の要旨
Positioning the printer Once you have selected a location and set up any optional 550-sheet drawers, you are ready to position the printer. CAUTION! The printer weighs 69.9 kg 1 Have others help you lift the (154 Ib) and requires at least four people printer out of the box. to lift it safely. Anytime you move or lift Use the handholds on the sides of the printer make sure you have enough the printer. people to help you. Use the handholds on the side of the printer when lifting. Set up the
ページ20に含まれる内容の要旨
2 Have three other people help you place the printer in the location you have chosen. If you are installing the printer on a 550-sheet drawer, align the positioning posts on the option with the holes in the printer. Make sure the printer is seated securely on the option. 3 Remove any tape or packing material from the outside of the printer. Installing an optional Your printer supports an optional duplex unit that provides two-sided printing. duplex unit To install the duplex unit: 1 Re
