Toshiba B-SX8Tの取扱説明書

デバイスToshiba B-SX8Tの取扱説明書

デバイス: Toshiba B-SX8T
カテゴリ: プリンタ
メーカー: Toshiba
サイズ: 1.88 MB
追加した日付: 12/26/2013
ページ数: 133
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスToshiba B-SX8Tの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Toshiba B-SX8Tに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Toshiba B-SX8Tをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Toshiba B-SX8Tのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Toshiba B-SX8Tの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Toshiba B-SX8T 取扱説明書 - Online PDF
Advertisement
« Page 1 of 133 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Toshiba B-SX8Tを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Toshiba B-SX8Tの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨


TOSHIBA Thermal Printer
B-SX6T/SX8T SERIES

System Mode Manual
Document No. EO13-33002

Original Mar., 2006
(Revised )


PRINTED IN JAPAN

ページ2に含まれる内容の要旨

EO13-33002 (Revision Date: Jul. 24, 2008) TABLE OF CONTENTS Page 1. INTRODUCTION-----------------------------------------------------------------------------------------------------1- 1 1.1 Key Operation Flow ----------------------------------------------------------------------------------------------1- 1 1.2 Operation Panel ---------------------------------------------------------------------------------------------------1- 2 2. SYSTEM MODE -----------------------------------------

ページ3に含まれる内容の要旨

EO13-33002 (Revision Date: Jul 24, 2008) Page 2.3 Printer Parameter Fine Adjustment ----------------------------------------------------------------- 2-35 2.3.1 Feed Amount Fine Adjustment ------------------------------------------------------------------------------- 2-37 2.3.2 Cut/Strip Position Fine Adjustment -------------------------------------------------------------------------- 2-38 2.3.3 Reverse Feed Amount Fine Adjustment ----------------------------------------------------

ページ4に含まれる内容の要旨

EO13-33002 (Revision Date: Jul 24, 2008) Page 2.9.8 Maximum Number of RFID Write Retries ------------------------------------------------------------------ 2-80 2.9.9 RFIDWritre Retry Time-out ------------------------------------------------------------------------------------ 2-81 2.9.10 RFID Adjustment for Retry ------------------------------------------------------------------------------------ 2-82 2.9.11 RFID Wireless Power Level Setting-------------------------------------------

ページ5に含まれる内容の要旨

1. INTRODUCTION EO13-33002 (Revision Date: Jul. 24, 2008) 1.1 Key Operation Flow 1. INTRODUCTION This document describes key operations using the keys and LCD display on the printer that you can operate on a printer alone. Key operations are performed in the following four printer setting modes: • Online mode where a pause, reset, automatic threshold setting, etc. are performed. • Download mode where a firmware downloading is performed. • System mode for service personnel where a s

ページ6に含まれる内容の要旨

1. INTRODUCTION EO13-33002 1.2 Operation Panel 1.2 Operation Panel The figure below illustrates the Operation Panel and key functions. LCD Message Display POWER LED (Green) ON LINE LED (Green) ERROR LED (Red) [FEED] key [RESTART] key [PAUSE] key The LCD Message Display is a 16-character x 2-line display, which shows messages in alphanumeric characters and symbols to indicate the printer’s status. . There are three LEDs on the Operation Panel. LED Illuminates when

ページ7に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2. SYSTEM MODE 2. SYSTEM MODE System mode consists of ten main menus: Self-diagnostic test, Parameter setting, Printer parameter fine adjustment, Test print, Sensor adjustment, RAM clear, IP address setting, Basic setting, and Factory mode. Each menu is used for the following purposes: • To check and print the system status, the Maintenance Counter, and the Print Head Element. • To set the parameters for the communication with the host computer, and the prin

ページ8に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Jul. 24, 2008) 2. SYSTEM MODE Continued from the previous page. This is the start of the Basic Setting menu. <8>BASIC [PAUSE] → Section 2.8 [FEED] [RESTART] <9>FOR FACTORY [PAUSE] This is the start of the Factory Mode menu. [FEED] [RESTART] This is the RFID Module Setting menu. <10>RFID [PAUSE] → Section 2.9 [FEED] NOTES: 1. System Mode menu can be selected with the [RESTART] or [FEED] key. 2. Pressing the [PAU

ページ9に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2.1 Self-diagnostic Test 2.1 Self-diagnostic Test Outline of Self-diagnostic Test In the Self-diagnostic test mode, the printer automatically checks and prints out the printer system information such as the sensor status or interface, and the maintenance counter. Also it performs a print head broken element check. The Self-diagnostic test contains the following sub menus: <1>DIAG. Vx.x [PAUSE] <1>DIAG. Vx.x Selection of the printing mode

ページ10に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2.1 Self-diagnostic Test 2.1.1 Printing Mode Selection While “PRT TYPE TRANSFR” is displayed on the LCD, press the [PAUSE] key. The type of printing mode can be selected: “TRANSFR” (Thermal transfer) or “DIRECT” (Thermal direct). After selecting the printing mode to be used, press the [PAUSE] key. <1>DIAG. Vx.x Thermal transfer: When transparent ribbon is used. PRT TYPE TRANSFR [RESTART] <1>DIAG. Vx.x Thermal transfer: When non-transparen

ページ11に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2.1 Self-diagnostic Test 2.1.3 Maintenance Counter/Parameter Settings Print Out When “MAINTENANCE CONT” is displayed, the printer is ready to print out the Maintenance Counter/Parameter Settings. Press the [PAUSE] key to start. <1>DIAG. Vx.x <1>DIAG. Vx.x <1>DIAG. Vx.x [PAUSE] MAINTENANCE CONT CHECKING & PRINT (1) TOTAL FEED 1.1km [QM] • Print Sample (2) FEED 1.1km (3) PRINT 0.5km (4) CUT 96 (5) HEAD U/D 12320 (6) RIBBON 3h (7) SOL

ページ12に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Jul. 24, 2008) 2.1 Self-diagnostic Test ------------------------------------------------------------------------------- (49) STABILIZER [ON] (50) AUTO CALIB. [OFF] (51) LAN [ON SNMP ON] (52) PRTR IP ADDRESS [192.168.010.020] (53) GATE IP ADDRESS [000.000.000.000] (54) SUBNET MASK [255.255.255.000] (55) MAC ADDRESS [00-80-91-34-00-CC] (56) TTF AREA [1280KB] (57) EXT CHR AREA [ 256KB] (58) BASIC AREA [ 128KB] (59)

ページ13に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Jul. 24, 2008) 2.1 Self-diagnostic Test • Descriptions of the Maintenance Counter # Item Count Condition Range (1) Total media distance Counts when the feed motor is driven to feed, print or issue media. 0.0 to 3200.0 km covered (Counted also during a reverse feed.) See NOTE 2. Destination printed on the same line indicates one selected for a (2) Media distance 0.0 to 3200.0 km parameter clear. covered (3) Print distance Counts while prin

ページ14に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Mar. 26, 2009) 2.1 Self-diagnostic Test • Descriptions of the Parameters Item # Description Specification FEED (11) Print start position fine adjustment (PC), (KEY) -50.0 mm to +50.0 mm CUT (12) Cut/strip position fine adjustment (PC), (KEY) -50.0 mm to +50.0 mm BACK (13) Reverse feed amount fine adjustment (PC), (KEY) -9.9 mm to +9.9 mm TONE(T) (14) Print tone fine adjustment (Thermal transfer), (PC), (KEY) -10 step to +10 step TONE(D) (15) Pr

ページ15に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Mar. 26, 2009) 2.1 Self-diagnostic Test Item # Description Specification RIBBON (32) Ribbon type selection TRANS: Transparent ribbon NON TRANS: Non transparent ribbon PEEL OFF STATUS (33) Strip wait status selection ON: Available OFF: Unavailable FEED KEY (34) Feed key function FEED: Feeds one label PRINT: Prints image buffer on one label KANJI (35) Kanji code type (Not supported by QM model) TYPE 1: Windows code TYPE 2: Original code EURO C

ページ16に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Mar. 26, 2009) 2.1 Self-diagnostic Test Item # Description Specification BASIC (61) BASIC interpreter setting ON: Available OFF: Unavailable BASIC TRACE (62) BASIC interpreter trace setting ON: Available OFF: Unavailable DHCP (63) DHCP function setting ON: Available OFF: Unavailable DHCP ID (64) DHCP ID setting Max. 16 characters DHCP HOST NAME (65) DHCP host name Max. 16 characters RTC BATT. CHK (66) RTC Low Battery Check setting ON: Availa

ページ17に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 (Revision Date: Jul. 24, 2008) 2.1 Self-diagnostic Test 2.1.4 Self-Diagnostic Test and Result Print Out When the Maintenance Counter/Parameter Settings is printed, the message returns to “<1>DIAG. Vx.x”. Press the [PAUSE] key twice. The Self-Diagnostic Test is ready. Press the [PAUSE] key to start. <1>DIAG. Vx.x AUTO DIAGNOSTIC The printer starts a self-diagnosis, and prints out the result. During printing, the message below appears on the display

ページ18に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2.1 Self-diagnostic Test • Descriptions (1) Program ROM Check (Model Name, Date, Version, Part number, Checksum) PROGRAM B-SX8T Program area Model name MAIN 15OCT2002 V1.0 A : 1A00 Main area Checksum Creation date Revision No.: Space or A to Z Software version No. BOOT 20SEP2002 V1.0: 8500 Boot area Checksum Creation date Software version No. (2) Alphanumeric Font ROM Check FONT 5600 Checksum of Font area Font area (3) Kanji ROM

ページ19に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2.1 Self-diagnostic Test (5) SDRAM Capacity SDRAM 16MB Capacity of DRAM System/drawing memory (6) Sensor 1 Check The status of the Strip Sensor, Ribbon Feed Motor Sensor, Ribbon Take-up Motor Sensor, Cutter Home Position Switch, Head Up Sensor, and Pinch Roller Sensor are printed. SENSOR1 00000000, 0 1 1 1 0 0 1 1 Pinch roller sensor status 1: The pinch roller is closed. Fixed to 0. NOTE: If either the pinch roller or the print head

ページ20に含まれる内容の要旨

2. SYSTEM MODE EO13-33002 2.1 Self-diagnostic Test (7) Sensor 2 Check The status of the Print Head Thermistor, Ambient Temperature Thermistor, Black Mark Sensor, and Feed Gap Sensor, Print Head resistance rank, and print head resolution are printed. SENSOR2 [H]23°C [A]22°C [R]4.2V [T]2.5V Feed gap sensor status: 0.0 to 5.0V Black mark sensor status: 0.0 to 5.0V Ambient temperature thermistor status: 0°C to 86°C If it is undetectable, “--°C “ is printed


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Toshiba 255 取扱説明書 プリンタ 142
2 Toshiba 7FM03281000 取扱説明書 プリンタ 3
3 Toshiba 305 取扱説明書 プリンタ 42
4 Toshiba 355 取扱説明書 プリンタ 23
5 Toshiba B-450-HS-QQ 取扱説明書 プリンタ 7
6 Toshiba 455 取扱説明書 プリンタ 27
7 Toshiba B-450-QQ 取扱説明書 プリンタ 4
8 Toshiba B-415 取扱説明書 プリンタ 6
9 Toshiba B-443 取扱説明書 プリンタ 67
10 Toshiba B-470-QQ Series 取扱説明書 プリンタ 13
11 Toshiba B-480-QP 取扱説明書 プリンタ 2
12 Toshiba B-480-QP SERIES 取扱説明書 プリンタ 1
13 Toshiba B-450-QP SERIES 取扱説明書 プリンタ 5
14 Toshiba B-450-QQ Series 取扱説明書 プリンタ 2
15 Toshiba B-492L 取扱説明書 プリンタ 1
16 Sony DPP-M55 取扱説明書 プリンタ 0
17 Sony LPR-1000MD 取扱説明書 プリンタ 1
18 Sony iP1200 取扱説明書 プリンタ 1
19 Sony Digital Photo DPP-EX7 取扱説明書 プリンタ 15
20 Sony DPPFP75 取扱説明書 プリンタ 14