ページ1に含まれる内容の要旨
MS510 and MS610 Series
User's Guide
Important: Click here before using this guide.
May 2013 www.lexmark.com
Machine type(s):
4514
Model(s):
630, 635, 646
ページ2に含まれる内容の要旨
Contents 2 Contents Safety information.......................................................................................6 Overview.....................................................................................................8 Using this guide.........................................................................................................................................8 Finding information about the printer......................................................................
ページ3に含まれる内容の要旨
Contents 3 Setting the paper size and type ........................................................................................................................41 Configuring Universal paper settings................................................................................................................41 Using the standard bin and paper stop ............................................................................................................41 Loading trays.....................
ページ4に含まれる内容の要旨
Contents 4 Loading paper and specialty media.........................................................................................................80 Setting the paper size and type ........................................................................................................................80 Configuring Universal paper settings................................................................................................................80 Using the standard bin and paper stop ....
ページ5に含まれる内容の要旨
Contents 5 Help menu.............................................................................................................................................168 Saving money and the environment.........................................................170 Saving paper and toner.........................................................................................................................170 Recycling......................................................................................
ページ6に含まれる内容の要旨
Safety information 6 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product uses a printing process that heats the print media, and the heat may cause the med
ページ7に含まれる内容の要旨
Safety information 7 CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. CAUTION—SHOCK HAZARD: Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. SAVE THESE INSTRUCTIONS.
ページ8に含まれる内容の要旨
Overview 8 Overview Using this guide This User’s Guide provides general and specific information on using the printer models that are listed on the cover page. The following chapters contain information applicable to all printer models: � Selecting a location for the printer � Additional printer setup � Paper and specialty media guide � Understanding printer menus � Saving money and the environment � Maintaining the printer � Clearing jams � Troubleshooting To find instructions for your printer:
ページ9に含まれる内容の要旨
Overview 9 What are you looking for? Find it here Help using the printer software Windows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context ‑sensitive information. Notes: � Help is automatically installed with the printer software. � The printer software is located in the printer program folder or on the desktop, depending on your operating system. The latest supplemental information, updates, and customer Lexmark support Web site— http://s
ページ10に含まれる内容の要旨
Selecting a location for the printer 10 Selecting a location for the printer When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room for them also. It is important to: � Set up the printer near a properly grounded and easily accessible electrical outlet. � Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard. � Provide a flat,
ページ11に含まれる内容の要旨
Selecting a location for the printer 11 5 4 1 1 3 2 1 Right side 30 cm (12 in.) 2 Front 51 cm (20 in.) 3 Left side 20 cm (8 in.) 4 Rear 20 cm (8 in.) 5 Top 30 cm (12 in.)
ページ12に含まれる内容の要旨
Additional printer setup 12 Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning—Potential Damage: Controller board
ページ13に含まれる内容の要旨
Additional printer setup 13 Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For the MS510dn and MS610dn printer models, see “Accessing the controller board” on page 40. For the MS610de printer model, see “Accessing the controller board” on page 74. 2 Unpack the optional card. Warning—Potential Dama
ページ14に含まれる内容の要旨
Additional printer setup 14 4 Push the card firmly into place as shown in the illustration. Warning—Potential Damage: Improper installation of the card may cause damage to the card and the controller board. Note: The entire length of the connector on the card must touch and be flushed against the controller board. 5 For the MS510dn and MS610dn printer models, close the controller board access door. For the MS610de printer model, close the controller board shield, and then close the access door.
ページ15に含まれる内容の要旨
Additional printer setup 15 An optional memory card can be purchased separately and attached to the controller board. 1 Access the controller board. For the MS510dn and MS610dn printer models, see “Accessing the controller board” on page 40. For the MS610de printer model, see “Accessing the controller board” on page 74. 2 Unpack the memory card. Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage. 3 Align the notch (1) on the memory
ページ16に含まれる内容の要旨
Additional printer setup 16 Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 29. Installing an Internal Solutions Port TM The controller board supports one optional Lexmark Internal Solutions Port (ISP). This option is supported only in MS610de printer model. Note: This task requires a fla
ページ17に含まれる内容の要旨
Additional printer setup 17 2 Lightly press the stop on the left side of the access door, and then slide the access door to remove it. 1 2 3 3 Unpack the ISP kit. Note: Make sure to remove and discard the small cable attached to the white connector. 1 6 2 3 5 4 1 ISP solution 2 Screw to attach the ISP to the bracket 3 ISP exterior cover 4 Screws to attach the ISP metal bracket to the printer cage 5 Plastic bracket 6 Long ISP cable
ページ18に含まれる内容の要旨
Additional printer setup 18 4 Place the plastic bracket inside the ISP exterior cover until it clicks into place. 5 Slide and push the ISP solution into the plastic bracket. 1 2 6 Secure the ISP solution to the plastic bracket using the long screw.
ページ19に含まれる内容の要旨
Additional printer setup 19 7 Tighten the two screws on the end of the ISP solution. 8 Attach the white plug of the ISP solution interface cable into the white receptacle on the ISP.
ページ20に含まれる内容の要旨
Additional printer setup 20 9 Attach the ISP exterior cover at an angle by inserting the left hinges first. 10 Lower the rest of the cover, and then slide the cover to the right.
