ページ1に含まれる内容の要旨
5040
User Guide Flatbed Printer
STOP
1
2
USER
SET UP
EJECT
ページ2に含まれる内容の要旨
TRADEMARK ACKNOWLEDGEMENTS • Centronics is a trademark of Centronics Data Computer Corporation. PCL and PCL6 are trademarks of Hewlett-Packard Company. IBM and IBM PC are trademarks of Inte rnational Business Machines Corporation. Apple, AppleTalk, TrueType, Laser Writer and Macintosh are trade-marks of Apple Computer, Inc. Microsoft, Windows, Windows 9x, Windows 2000, Windows NT and MS-DOS are registered trademarks of Microsoft Corporation. PostScript is a tradem ark of Adobe Systems
ページ3に含まれる内容の要旨
User guide Table of contents Table of contents Introduction 1 Printer features 1 Interfaces 1 Emulations 1 Symbols used 1 About this manual 2 1 Printer at a glance 3 View from the front 3 View with cover opened 3 View from the rear 4 2 Installation 5 Unpacking the printer 5 Placing your printer 6 Checking the printer voltage 8 Connecting the printer 8 Switching on the printer 10 3 Printer drivers and firmware 11 Printer drivers 11 Installing a printer driver in Windows 95/98 11 Installing a prin
ページ4に含まれる内容の要旨
User guide Table of contents 4 Control panel 17 Display, indicators and keys 18 Status indicators 19 Status indicator variations 19 Ready indicator (STOP LED) 20 Paper indicator (EJECT LED) 21 User 1 and User 2 indicators 21 Key functions during operation 22 STOP key 22 EJECT key 22 USER key 23 Key functions when powering on 24 STOP key 24 EJECT key 24 User key 25 Key functions in menu mode 26 USER key 26 EJECT key 26 STOP key 26 5 Print media 27 Inserting a document 27 Inserting a passbook 28 R
ページ5に含まれる内容の要旨
User guide Table of contents Menu configurations (User 1/User 2) 46 Menu handling 47 Key functions 47 USER key 47 EJECT key 47 STOP key 48 Setting parameters (principle) 49 Terminating menu mode 50 Selecting the LC display language 51 Printing out the status page 53 Power on + EJECT key 53 Print out status page in menu mode 54 Status page (example) 56 Menu parameters 57 Test function 63 Hex Dump 63 Activating Hex Dump 63 Exiting the test mode 64 Test printout Hex Dump (Example) 64 9 Troubleshoot
ページ6に含まれる内容の要旨
User guide Table of contents Overrun Error (Serial I/F) 72 Cover Open Error 72 Cover Open Error 72 Warnings 73 Data in Buffer 73 Remove Paper 73 Clearing paper jams 74 10 Care and maintenance 77 Cleaning the housing 77 Cleaning the interior 77 Cleaning the MSR-H magnetic stripe 78 Transport of the printer 80 Preparations for transport 80 Shipping the printer 80 A Specifications 81 Printer specifications 81 Paper specifications 85 Interface specifications 87 B Character sets 89 OCR-A character se
ページ7に含まれる内容の要旨
User guide Table of contents Code page 855 97 Code page 857 97 Code page 866 98 Code page 869 98 Code page USSR Gost 99 Code page 864 99 Code page 437G 100 Code page 920 100 Code page 858 101 Code page 923 101 ISO code pages 102 ISO 8859-2 102 ISO 8859-5 102 ISO 8859-7 103 ISO 8859-8 103 Available code pages and fonts 104 C Emulations 107 Escape sequences 107 What are escape sequences? 108 Control codes 108 How are escape sequences used? 108 List of available control codes 109 PR2 mode 109 PR50
ページ8に含まれる内容の要旨
User guide Table of contents Serial interface RS232C 126 Connector assignment 126 Serial attachment characteristics 127 Data rates 127 Supported protocols 127 Data Transfer 127 Parity 127 Handshaking 128 Ready/Busy 128 XON/XOFF 128 Configuring the serial interface of the PC 129 DOS mode 129 Windows 95/98/ME 129 Windows 2000/XP 129 USB interface 130 E Consumables and accessories 131 Consumables 131 Accessories 131 VI
ページ9に含まれる内容の要旨
User guide Introduction Introduction Printer features This printer is a document printer for printing manually inserted docu- ments as well as passbooks (vertical and horizontal fold passbooks). Manual insertion of the documents is supported by an automatic doc- ument alignment. The printer has a high processing speed and compact design. The 24- needle print head guarantees an excellent print quality. Different factory installed models can be delivered: MSR (magnetic stribe read/writer), MICR
ページ10に含まれる内容の要旨
Introduction User guide About this manual The user guide contains a detailed description of the printer, its characteristic features and additional information. Chapter 1 Printer at a glance lists all the parts of the printer. Chapter 2 Installation contains start-up instructions and points to note. Chapter 3 Printer drivers and firmware provides instructions for installing the printer driver. Chapter 4 Control panel explains how to control printer operations. Chapter 5 Print media tells
ページ11に含まれる内容の要旨
User guide Printer at a glance 1 Printer at a glance View from the front Cover Power switch (On/Off) Control panel Paper tray View with cover opened Ribbon cassette Release lever Print head 3
ページ12に含まれる内容の要旨
Printer at a glance User guide View from the rear Power 1st Serial USB inlet interface interface Parallel 2nd Serial interface interface 4
ページ13に含まれる内容の要旨
User guide Installation 2 Installation Unpacking the printer Place your packaged printer on a solid base. Make sure that the “Up” symbols point in the correct direction. Open the packaging, lift the printer out of the cardboard box and re- move the re-maining packaging material. Check the printer for any visible transport damage and missing items. The following items should be included: The Quick start guide (QSG) This CD-ROM (at the back of the Quick start guide) The power cable The ribbo
ページ14に含まれる内容の要旨
Installation User guide Placing your printer Place the printer on a solid, flat, surface, ensuring that the printer is po- sitioned in such a way that it can not topple, and that there is easy access to the control panel and paper input devices. Also ensure that there is sufficient space for the printed output. min. 1 cm min. 1 cm min. 2 cm min. 10 cm Location Minimum space Left and right side of the printer 1 cm Top of the printer 2 cm Rear of the printer to ensure sufficient ventilation 10 c
ページ15に含まれる内容の要旨
User guide Installation When selecting the printer location, observe the following additional instructions: Never place the printer in the vicinity of inflammable gas or STOP explosive substances. Protect the printer from shock, impact and vibration. Be sure to connect the printer to a socket with the correct mains voltage. Do not expose the printer to direct sunlight. If you cannot avoid placing the printer near a window, protect it from the sunlight with a curtain. When connecting the
ページ16に含まれる内容の要旨
Installation User guide Checking the printer Make sure that the device has been set to the correct voltage (e.g. 230 V in Europe, 120 V in the USA). To do this, check the type plate above voltage the power inlet at the back of the printer. Contact your dealer if the set- ting is incorrect. Never switch on the printer if the voltage setting is incorrect, STOP since this may result in severe damage. Type plate Connecting the printer Connect the power cable to the power inlet of the printer. Co
ページ17に含まれる内容の要旨
User guide Installation Make sure that the printer and the computer are switched off and connect the data cable between the printer and the computer, in this example a 36-pin centronics parallel cable. 9
ページ18に含まれる内容の要旨
Switching on the Before switching the printer on, make sure that it is connected correctly and that you have followed all the safety and installation instructions printer (see section Placing your printer, page 6). Press the power which is located at the front bottom right of the printer switch for switch- ing on the printer. The printer initializes. When the initialization is completed, the 1 Ready indicator and the USER 1 indicator 2 lights up. The message ONLINE NO PA- PE
ページ19に含まれる内容の要旨
User guide Printer drivers and firmware 3 Printer drivers and firmware Printer drivers You need to install a printer driver so that the printer can process the data from your application programs. An original driver offers the best conditions for optimal printing re- sults. All available printer drivers can be found on the CD-ROM en- closed with the printer, as well as on our Internet site, from which you can also download updated versions as necessary. The use of any Windows printer driver f
ページ20に含まれる内容の要旨
Printer drivers and firmware User guide 11. Select the port to which your printer is connected, then click on Next. 12. If required, edit the name of the default printer and specify whether you wish to use the printer as a default printer by clicking on the relevant option. Then click on Next. 13. Specify whether you wish to print out a test page by selecting the relevant option and click on Finish. The printer driver will now be installed. Installing a printer driver in The online CD-ROM c
