ページ1に含まれる内容の要旨
Dell 2300 Projectors
Projectors are being provided and assigned to each classroom for educational
purposes (i.e., not for home use). They should receive the same degree of attention
to security as other materials and equipment in the classroom with regards to safety
and theft. The projector should remain in the assigned room; and if for some reason
it is moved from the assigned classroom, the Tech Assistant should be notified.
* * * * * * * * * * * * * *
For more detailed use info
ページ2に含まれる内容の要旨
TOP VIEW 1 Control panel 2 Elevator button 3 Remote control receiver 4 Lens 5 Focus ring 6 Zoom tab Power button CONTROL PANEL 1 2 Source 3 Keystone adjustment 4 Resync 5 Temperature warning light 6 Lamp warning light 7 Four directional keys 8 Keystone adjustment 9 Menu SIDE VIEW 1 IR receiver 2 VGA out (monitor loop-through) 3 VGA in (blue, D-sub) connector 4 USB connector 5 S-video connector 6 Composite video connector 7 Aud
ページ3に含まれる内容の要旨
1 Video Mode button REMOTE CONTROL 2 Next Page button (page down) 3 Menu button 4 4:3/16:9 (aspect ratio) button 5 Hide button (Similar to Freeze on other models) 6 Volume button 7 Keystone Correction button 8 Resync button 9 Source button 10 Four Direction buttons 11 Previous Page button (page up) 12 Power button 13 Light Part B: Hooking up the Projector Connecting to a laptop computer 1 = Power Cord 2 = VGA cable (Blue) 3 = USB to USB (Optional for using s
ページ4に含まれる内容の要旨
Connecting to a desktop • Blue VGA cable between computer & Video In on projector. • Monitor cable to Video out on Projector. • Power cables for all 3 components. • USB to USB (Optional for using some remote control features). Connecting to other devices? Check this Dell web site. http://support.dell.com/support/edocs/acc/2300MP/en/install.htm#1 Part C: Powering On/Off NOTE: Place projector approximately 10 feet from the screen. Turn on the projector before you
ページ5に含まれる内容の要旨
Powering off procedures 1. Press the power button to turn off the projector. 2. Press the power button again. The cooling fans continue to operate for 90 seconds. 3. If disassembling, disconnect the power cord from the electrical outlet and the projector. Part D: Adjusting the Projector Use Zoom & projector placement to maximize image size. Use Keystone feature and directions below to square up the image. Use Focus ring to perfect clarity of image. To raise the projector 1.
