ページ1に含まれる内容の要旨
Printed in Japan
402529801
Printed on 100% recycled paper.
02.06-.9A(C05)
ページ2に含まれる内容の要旨
About The Manuals and Notations Used Types of Manual The documentation for your EPSON projector is divided into the following three manuals. The manuals cover the following topics. Safety Instructions/World-Wide Warranty Terms This manual contains information on using the projector safely, and also includes world- wide warranty terms and a troubleshooting check sheet. Be sure to read this manual thoroughly before using the projector. User's Guide (this manual) This User’s Guide contains informa
ページ3に含まれる内容の要旨
Unpacking the Projector When you unpack the projector, make sure that you have all these components. If any of the components are missing or incorrect, please contact the place of purchase. Projector Remote control Power cable (with lens cover) (including a CR2025 lithium (1.8 m (6 ft.)) battery) For connecting the projector to a wall outlet Computer cable RCA video cable USB cable (mini D-Sub 15-pin/mini D- (1.8 m (6 ft.)) (1.8 m (6 ft.)) Sub 15-pin 1.8 m (6 ft.)) For connecting the projector
ページ4に含まれる内容の要旨
Features of the Projector Automatic keystone correction function The vertical angle of the projector is detected, so that any vertical keystone distortion in the projected images can be automatically corrected. (p.34) Automatic setup function When projecting computer images, the signals from the connected computer are detected automatically and adjusted so that the optimum images are projected. Even if several people are giving presentations using the same projector, the optimum picture qu
ページ5に含まれる内容の要旨
80 F 70 D 60 C 50 40 B 30 A 20 10 0 Jan Feb Mar Jun Jul projector 3
ページ6に含まれる内容の要旨
Contents Unpacking the Projector.................................................................... 1 Features of the Projector................................................................... 2 Before Using the Projector Part Names and Functions ............................................................... 8 Front/Top................................................................................................8 Control Panel................................................................
ページ7に含まれる内容の要旨
Adjusting the Image Quality ............................................................ 37 Focusing the Screen Image .................................................................. 37 Adjusting Computer Images ................................................................ 37 Selecting the Colour Mode .................................................................. 40 Advanced Operations Functions for Enhancing Projection ................................................ 42 A/V Mute ......
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
Before Using the Projector This chapter describes the procedures for setting up the projector before use. Part Names and Functions .................................................8 • Front/Top ................................................................................................ 8 Control Panel.......................................................................................... 9 Rear............................................................................................
ページ10に含まれる内容の要旨
Part Names and Functions Front/Top • • • •Zoom ring (p.33) • • • • (Warning) indicator (p.62) Adjusts the image size. Flashes or lights in different colours to indicate problems with the projector or that the projection • • • •Focus ring (p.37) lamp needs to be replaced. Adjusts the image focus. • •Power indicator (p.61) • • Flashes or lights in different colours to indicate the operating status of the • • • •Air exhaust vent projector. • • • •Control panel (p.9) • • • •Security lock ( )
ページ11に含まれる内容の要旨
Control Panel • • • • [Power] button (p.29, 31) • • • • [Help] button (p.60) Turns the projector power on and Displays the online help menu to off. assist you if you have a problem. • • • • [Source] button (p.30) • • • • [Keystone] button (p.36) Switches the input source between the Press to manually correct Computer/Component Video port, S- keystone distortion in images. Video port and Video port each time the When pressed while a help menu button is pressed. is being displayed, it selects i
ページ12に含まれる内容の要旨
Part Names and Functions Rear • • • •Video port (p.23) • • • • Audio-In port (p.20, 26) Inputs composite video signals to Inputs audio signals. the projector from other video sources. Connect using a stereo mini Use the RCA video cable for this jack. connection. • • • •Remote control light- • • • •S-Video port (p.24) receiving area (p.12) Inputs S-Video signals to the Receives signals from the projector from other video sources. remote control. • • • •Power inlet (p.28) Connects the • •Speak
ページ13に含まれる内容の要旨
Remote Control • • • •[Page down]/[Page up] • • • •Remote control light- buttons (p.21) emitting area (p.13) When using the remote Outputs remote control control as a wireless mouse, signals. press these buttons to scroll • • • •[Power] button back and forth through pages (p.29, 31) when projecting a Turns the projector power PowerPoint presentation. on and off. • •Input select buttons • • • • • •[Color Mode] button (p.30) (p.40) [Computer]: Switches the Selects the colour mode. si
ページ14に含まれる内容の要旨
Before Using the Remote Control Using the Remote Control and Remote Operating Range When using the remote control for the first time, pull out the insulating tape that is protruding from the battery holder. When the insulating tape is pulled out, the remote control can then be used. Using the Remote Control The remote control is used in the following way. Procedure Point the remote control light-emitting area toward one of the remote control light-receiving areas on the projector and operate
ページ15に含まれる内容の要旨
Remote Operating Range Use the remote control within the ranges indicated below. If the distance or angle between the remote control and the remote control light-receiving area is outside the normal operating range, the remote control may not work. Operating distance Operating angle Approx. 30º horizontally Approx. 6 m (20 ft.) Approx. 15º vertically Approx. 30º horizontally Remote control light-receiving area Within approx. 6 m (20ft.) Approx. 30º Approx. 30º Approx. 30º Approx. 30º Pag
ページ16に含まれる内容の要旨
Installation Setting Up the Projector The projector supports the following four different projection methods, allowing you to choose the best method for displaying your images. Caution : Before setting up the projector, be sure to first read the separate Safety Instructions/ World-Wide Warranty Terms. Front projection Rear projection using a translucent screen Front/ceiling projection Rear/ceiling projection using a translucent screen * A special method of installation is required in
ページ17に含まれる内容の要旨
Screen Size and Projection Distance The distance between the projector and the screen determines the actual image size. 1.0–11.7 m (3.2–38.5 ft.) Recommended distance While referring to the table below, position the projector so that the images are projected onto the screen at the optimum size. The values should be used as a guide for setting up the projector. The actual values will vary depending on projection conditions and the zoom setting. 4:3 Screen size Projection distance Distance from
ページ18に含まれる内容の要旨
Connecting to a Computer Caution : When connecting the projector to a computer, be sure to check the following. Turn off the power for both the projector and the computer before connecting them. If the power for either device is on at the time of connection, damage may result. Check the shapes of the cable connectors and the device ports before making the connections. If you try to force a connector to fit a device port with a different shape or number of terminals, damage to the connecto
ページ19に含まれる内容の要旨
Projecting Images from the Computer The shape and specifications of the computer's monitor port will determine what type of cable should be used. Check the following to see which type of port your computer has. If the Monitor Port is a Mini D-Sub 15-pin Port Use the accessory computer cable to connect the Computer/Component Video port at the rear of the projector to the monitor port of the computer. To monitor port Computer cable To Computer/ (accessory) Component Video port Tip : Change th
ページ20に含まれる内容の要旨
Connecting to a Computer If the Monitor Port is a 5BNC Port Use the optional VGA-HD15 PC cable to connect the Computer/Component Video port at the rear of the projector to the monitor port of the computer. See "Appendices: Optional Accessories" (p.82) To monitor port To Computer/ Component Video port VGA-HD15 PC cable (optional) Tip : Change the "Input Signal" setting in the "Video" menu to "RGB" after making the connections. (p.47) If more than one external component is connected to the
