ページ1に含まれる内容の要旨
Epson PowerLite 62c/82c Projector
Remote Control Buttons
Projector Parts
reduces the zooms in on Selects menu items and
Control panel
Security lock Zoom ring
Focus ring
zoomed image (enlarges) selected settings, and scrolls the
(see below)
area image
Remote control
Lamp cover
sensor
Selects a menu
option or displays
Turns
the next screen
projector
or menu
on or off
Cancels current
Turns off audio
function or
Foot release and video
displays previous
lever
menu or screen
Front adju
ページ2に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Zoom adjustment Manual (optical) Altitude Up to 4,921 feet (1,500 m) in standard operating mode, or up to 7,500 feet Internal sound (2,286 m) with high altitude fan mode system 5 W monaural enabled Optical aspect ratio 4:3 (horizontal:vertical) Zoom ratio 1:1.2 Safety United States FCC 47CFR Part 15B Class B (DoC) Noise level 36 dB (High brightness mode) UL60950 Third Edition 30 dB (Low brightness mode) Canada ICES-003 Class B Keystone correction CSA C22.2 No.
ページ3に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Compatible Computer Display Formats Positioning the Projector To project images from a computer, set the computer’s video card at a refresh rate (vertical frequency) compatible with the Follow these guidelines to get the best results when projecting: projector; see the following table for compatible formats. Some ❏ Place the projector on a sturdy, level surface, between images are automatically resized to display in the projector’s 2.8 and 35.4 feet from th
ページ4に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Image Size and Projection Distance Turning On the Projector The distance between the projector and the screen determines the basic size of the projected image, as shown below. The Make sure your projector and other equipment are set up and diagram shows approximately how big your image will be, based connected correctly. Then turn on your projector, as described on where you set up the projector. Because other adjustments— below. such as those made with t
ページ5に含まれる内容の要旨
Epson PowerLite 62c/82c Projector The projector beeps once and the Power light flashes green as The Projector and Notebook Don’t the projector warms up, then an image begins to appear. When Display the Same Image the Power light stops flashing and remains green, the projector If you’re projecting from a notebook, and you can’t see your is ready for use. image on the projection screen and on your notebook at the Warning: same time, follow these guidelines. Never look into the lens when the
ページ6に含まれる内容の要旨
Epson PowerLite 62c/82c Projector 5. Turn off and disconnect any equipment plugged into the Turning Off the Projector projector. Caution: When you’ve finished using the projector, follow the To avoid damaging the projector or lamp, never unplug the recommended procedure to shut it down. power cord when the Power light is green or flashing orange. Note: 6. Replace the lens cap and unplug the power cord. When the projector has not received any input signals for 30 minutes, it automatically tur
ページ7に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Rotate the zoom ring to reduce or enlarge the image. Adjusting the Image Zoom ring The following sections describe how to adjust the displayed image. Adjusting the Height of the Image If the image is too low, you can raise it by extending the You can also change the image size by moving the projector projector’s front foot. closer to or farther away from the screen. You can use the 1. Stand behind the projector. Press the foot release button E-Zoom buttons
ページ8に含まれる内容の要旨
Epson PowerLite 62c/82c Projector ❏ To manually adjust the keystone correction value, press Selecting the Color Mode the or button on the projector to correct the shape of the image. After correction, your image will be You may want to adjust the color mode to optimize the color slightly smaller. and brightness for the type of image you’re projecting and the environment in which you’re projecting it. Color Mode button You can also make keystone adjustments using the projector’s Setting
ページ9に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Adjusting the Volume Turning Off the Picture and Sound You can use the buttons on the remote control or projector to Press the A/V Mute button on the remote control to darken increase or decrease the volume for both the projector’s built-in your screen and turn off the sound. When you’re ready to speaker and external speakers connected to the projector. Press resume, press A/V Mute again. the button to increase the volume, or the button to If you press the
ページ10に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Power Lamp Temp Using the Remote Control light light light Description Red Flashing Flashing The projector has an internal The remote control lets you access the projector’s features from red red error. Turn it off and unplug anywhere in the room—up to 20 feet away. (This distance may it. Contact Epson for help. be shorter if the remote control batteries are low.) Red Off Flashing There is a problem with the The projector may not respond to remote control co
ページ11に含まれる内容の要旨
Epson PowerLite 62c/82c Projector ❏ To advance slides in a Page Down Page U p 3. Replace the battery cover. Make sure it clicks into place. PowerPoint presentation in Slide Show mode, press the Page Down or Enter button on the remote control. Press the Page Up or Esc button to go back a slide. Replacing Remote Control Batteries When the batteries run out, follow the steps below to replace Cleaning the Projector Case them. The remote requires two AAA alkaline batteries. Caution: Before yo
ページ12に含まれる内容の要旨
Epson PowerLite 62c/82c Projector 2. Turn the projector upside-down and clean the air filter and Replacing the Lamp air intake vent. Epson recommends using a small vacuum cleaner designed for computers and other office equipment. The projection lamp typically lasts for about 2000 hours of use If you don’t have one, gently clean them using a very soft (in high brightness mode) or 3000 hours (in low brightness brush (such as an artist’s brush). mode). It is time to replace the lamp when: ❏
ページ13に含まれる内容の要旨
Epson PowerLite 62c/82c Projector 5. Hold the lamp as shown and pull it straight out. Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp warning message. Follow these steps: Note: Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used. Note: The lamp(s) in this product contain mercury. Please 1. Connect the power cable and
ページ14に含まれる内容の要旨
Epson PowerLite 62c/82c Projector Product Part number Transporting the Projector Ceiling mount (gyro lock with suspension ELPMBUNI adapter) The projector contains many glass and precision parts. If you False ceiling plate ELPMBFCP need to transport it, please follow these packing guidelines to Suspension adapter ELPMBAPL prevent damage to the projector: Security bracket/cabling for gyro lock mounts ELPMBSEC Adjustable ceiling channel ELPMBACC ❏ When shipping the projector for repairs, use the
