ページ1に含まれる内容の要旨
Epson PowerLite Pro Cinema 800
Projector Parts Projector Specifications
Horizontal lens General
shift dial
Control panel Type of display Poly-silicon Thin Film Transistor (TFT)
active matrix
Vertical lens
shift dial
Size of LCD panels Wide: 0.7 inches (18 mm)
Lens F=2.1 to 2.8, f=21.4 to 31.7 mm
Zoom ring
Zoom ratio 1:1.5
Resolution 1280 × 720 pixels (720p)
Focus ring
Brightness 1600 ANSI lumens max.
Dynamic contrast 5000:1
ratio
Ventilation
slots Image size 30 to 300 inches (0.76 to 7.6 m)
ページ2に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 Electrical Image Size and Projection Distance Rated frequency 50/60 Hz The maximum size of the image is determined by the distance from the projector’s lens to the screen. Depending on how you Power supply 100 to 120 V: 2.7 A use the Zoom and other settings, the actual size may be smaller. 200 to 240 V: 1.2 A Power consumption Operating: 245 W max. 16:9 Aspect ratio Standby: 4 W Projection distance (wide to tele) Maximum diagonal image size Environmental 2.9 to
ページ3に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 If you place the projector above or below screen level, you’ll have to tilt it up or down to aim the image at the screen; this 11.81 in. distorts (or “keystones”) the shape of the image, but you can correct it using the projector’s Keystone function (see page 6). If you place the projector off to the side, aim it straight ahead 3 in. (rather than at the center of the screen), then use the horizontal lens shift dial to center the image. Do not place the project
ページ4に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 Item Command Cable Connections Source Terminal Signal name change Input A Input A SOURCE 10 You can connect up to five pieces of video equipment to the projector, using the ports listed below (cables are not included): YCbCr SOURCE 14 YPbPr SOURCE 15 Port Required Cable Supported video formats Auto SOURCE 1F Video RCA video cable Analog TV (NTSC, PAL, SECAM) Input B Input B SOURCE 20 S-Video S-video cable Analog TV (NTSC, PAL, SECAM) RGB SOURCE 21 Input A Use a 3
ページ5に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 Turning Off the Projector Compatible Video Formats 1. Turn off any equipment connected to the projector. 2. Press the Off button on the remote control (or press the The projector supports NTSC, PAL, and SECAM, as well as PPower button on the projector twice). the digital video formats listed below. 3. Let the projector cool for about 30 seconds. Digital video formats 4. Once the light stops flashing and stays on, turn off the power Format Signal name Resolutio
ページ6に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 If you press the Source button on the Choosing the Color Mode projector, you see a menu of available You can change the Color Mode to adjust the brightness, sources. Press the u or d button to contrast, and color, letting you quickly optimize the image for highlight a source and press the Select various lighting environments. button. 1. Select the image source you want to adjust (a different Color Mode can be saved with each image source). If you select t
ページ7に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 When you select an Aspect setting, the resolution at which the image displays depends on the currently active picture source. The resolutions for all video formats and aspect ratio settings are listed below. Analog TV, composite video, or S-video Aspect setting Squeeze/Wide Squeeze Format Normal (4:3) Zoom (16:9) (16:9) Through (4:3) Through (16:9) NTSC 960 × 720 1280 × 720 1280 × 720 596 × 446 794 × 446 PAL or SECAM 960 × 720 1280 × 720 1280 × 720 708 × 528 944
ページ8に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 Projector Status Lights Remote Control and IR Codes If your projector isn’t working correctly, first turn it off, wait for Following is an illustration of the remote control, along with the warning light to turn a steady orange, turn off the power the IR codes that correspond to the remote control buttons: switch on the back, and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the Function Hex code problem, check the
ページ9に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 Cleaning and Replacing the Air Filter Replacing the Lamp Clean the air filter on the bottom of the projector once every The projection lamp lasts from 1700 to 3000 hours, depending three months, or more often in dusty environments. If it’s not on usage. You can use the Info menu to check how long it’s cleaned periodically, it can become clogged, preventing proper been in use. It’s time to replace the lamp when: ventilation. This can cause overheating and damage t
ページ10に含まれる内容の要旨
Epson PowerLite Pro Cinema 800 5. Loosen the two screws securing the lamp (they don’t come Optional Accessories all the way out). Epson provides the following optional accessories: Product Part number Replacement lamp (ELPLP35) V13H010L35 Air filter replacement (ELPAF09) V13H134A09 Kensington security lock ELPSL01 S-video cable ELPSV01 Component video cable ELPKC19 You can purchase accessories from an authorized Epson 6. Grasp the lamp as shown and pull it straight out. reseller. To find the
