Epson PowerLitte 7900pの取扱説明書

ページ1に含まれる内容の要旨

® ®
EPSON PowerLite 7900p
Quick Setup
Connect the projector
to your laptop
For most setups, you’ll need just these two cables:
Power cord VGA computer cable
Make sure your projector and notebook are turned off.
1
Connect one end of the VGA computer cable to the
2
Computer port on the projector.
Follow these instructions to connect the projector
to your notebook. To connect other devices, such
as a VCR or desktop PC, see your User’s Guide.
Connect the other end to your notebook’s video-out or
3

ページ2に含まれる内容の要旨

Quick Setup ® ® EPSON PowerLite 7900p Adjust the image Troubleshooting Rotate the focus ring to sharpen the image. 1 If you see a blank screen... If you see a blank screen or the No signal message after turning on your notebook, check the following: Focus ring  Make sure the power light on the projector is Zoom ring green and not flashing and the lens cover is off. ( ? ) No signal Help  Try turning off the notebook and restarting it.  If you’ve only connected your notebook to the projector