ページ1に含まれる内容の要旨
User’s Guide ScreenPlay 5000
SP5000_UG.qxd 6/21/04 10:24 AM Page 1
ScreenPlay 5000
ScreenPlay 5000
InFocus Corporation
In Europe:
In the Americas:
InFocus International B.V.
27700B SW Parkway Avenue
Strawinskylaan 585
Wilsonville, Oregon 97070-9215
1077 XX Amsterdam
1-800-294-6400 503-685-8888
• The Netherlands
Fax: 503-685-8887
Phone: +31 20 579 2000
http://www.infocus.com
Fax: +31 20 579 2999
In Asia:
InFocus Systems Asia, Pte Ltd.
238A Thomson Road
#18-01/04 Novena Square
User’s Guide
Sin
ページ2に含まれる内容の要旨
SP5000_UG.qxd 6/21/04 10:24 AM Page 2 IF YOU NEED ASSISTANCE.... For all types of Service and Support information on InFocus products and services please go to our web site at www.infocus.com/service. Many resources are available on our website. Some examples are: •Frequently Asked Questions about general projector usage and technical issues • E-mail support • Online product registration •Product data sheets • Optional accessories •Technical specifications, interactive image size calculato
ページ3に含まれる内容の要旨
Changes or modifications not expressly approved by InFocus Corporation can void Declaration of Conformity the user's authority to operate the equipment. Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA Canada European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands This Class B digital apparatus complies with Canadian ICES-003. We declare under our sole responsibility that this projector conforms to the following Cet appareil numérique de
ページ4に含まれる内容の要旨
Table of Contents If you are experienced in setting up presentation systems, use the included Quick Set Up card. For complete details on connecting and operating the projector, refer to this User’s Guide. Electronic versions of this User’s Guide Introduction 4 in multiple languages are available on our website. The most current ver- sions can be found on our website. Positioning the projector 6 The website also has technical specifications (an interactive image size cal- Video connections 7 c
ページ5に含まれる内容の要旨
vesa 1 dv1 2 component 3 L R trigger audio in S-video 4 serial control video 5 Important Operating Considerations for Safety Place the projector in a horizontal position with no greater than 8 Do not place objects or people in the 2 foot (.6m) area along the side of the projector. degrees forward or backwards tilt. For ceiling mount applications, this area should be 5 feet (1.5m). Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not pl
ページ6に含まれる内容の要旨
dv1 2 vesa 1 component 3 L trigger R audio in S-video 4 serial control video 5 Projector components and features Introduction keypad ® Your new ScreenPlay™ 5000 projector from InFocus is specifically designed for home cinema applications. It has native 1280x720 resolution. The projector is easy to connect, easy to use, easy to maintain. speakers Online Registration Register your projector on our website to receive product updates, announcements, and registration incentives. See the inside of
ページ7に含まれる内容の要旨
Connector Panel Connector panel The projector provides two computer and four video connectors: component video one M1-D/A (HD, DVI, and computer) audio trigger s-video M1-D/A VESA one VESA (HD, HD component, and computer) one S-video one composite RCA trigger Y Pb Pr one component video audio in serial control It also has an RS-232 serial connector for serial control. The Command Line Interface (CLI) specifications and commands are on our website. A 3.5mm mini-jack trigger provide
ページ8に含まれる内容の要旨
Positioning the projector There are a number of factors to consider when determining where to set up the projector, including the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines. 1 Position the projector on a flat surface at a right angle to the screen. The projector must be within 10 feet (3 m) of your power source. To ensure adequate cable access, place the projector a
ページ9に含まれる内容の要旨
Table 1: Video connections Video connections You can connect VCRs, DVD players, camcorders, digital cameras, video Video Game VESA VESA 1 games, HDTV receivers, and TV tuners to the projector. (You cannot directly Composite video Video 5 S-video S-video 4 connect the coaxial cable that enters your house from a cable or satellite Component video Component 3 company; the signal must pass through a tuner first. Examples of tuners are digital cable boxes, VCRs, digital video recorders, and satell
ページ10に含まれる内容の要旨
Connecting a video device connect component cable trigger Y Pb Pr If your video device has more than one output, select the highest quality audio in serial control one. DVI video has the best quality, followed by Component video, S-video, and then composite video. If the video device uses component cable connectors, plug the cable’s green connectors into the green component-out connector on the video device and into the green component connector (labeled “Y” Component 3) on the Y Pb Pr tri
ページ11に含まれる内容の要旨
2 vesa1 dv1 component 3 L R trigger audio in serialcontrol S-video 4 video 5 vesa 1 dv1 2 component 3 L R trigger audio in S-video 4 serial control video 5 Displaying a video image remove lens cap Remove the lens cap. press Power button Press the Power button on the top of the projector or the remote. The fans start to run. When the lamp comes on, the startup screen is dis- played. It can take a minute for the image to achieve full brightness. ? No startup screen? Get help on page 12. Plug in
ページ12に含まれる内容の要旨
dv1 2 vesa 1 component 3 L R rigger audio in S-video 4 serial con rol vid t t eo 5 R S-video 1 audio out computer 1 computer 2 serial control network audio in L video 2 audio in monitor out computer in video in Adjust the zoom or focus rings by rotating them until the desired image size adjust zoom and focus and focus are produced. zoom focus If the image is not square, adjust the vertical keystone using the buttons on adjust keystone the keypad. Press the upper Keystone button to reduce the
ページ13に含まれる内容の要旨
Connecting a computer connect computer cable Connect either a VESA cable or M1 cable into the appropriate connector on Pb trigger Y Pr audio in the projector (Vesa 1 or DVI 2). Connect the other end to the video port on serial control your computer. If you are using a desktop computer, you first need to dis- connect the monitor cable from the computer’s video port. Connect the black power cable to the connector on the back of the projector and to your electrical outlet. The Power LED on the
ページ14に含まれる内容の要旨
Shutting down the projector Troubleshooting your setup The projector automatically blanks the screen after no active source is If your image appears correctly on the screen, skip to the next section detected for 30 minutes. This blank screen helps preserve the life of the pro- (page 20). If it does not, troubleshoot the setup. The LED on top of the pro- jector. The image returns when an active source is detected or a remote or jector indicates the state of the projector and can help you troubl
ページ15に含まれる内容の要旨
A A vesa 1 dv1 2 ponent 3 com L R trigger audio in S-video 4 serial control video 5 dv1 2 vesa 1 component 3 L R trigger audio in S-video 4 serial control video 5 dv1 2 vesa 1 component 3 L trigger R audio in S-v eo 4 id serial control video 5 dv1 2 vesa 1 component 3 L trigger R audio in S-video 4 serial control video 5 dv1 2 vesa 1 component 3 L trigger R audio in S-video 4 serial control video 5 A Source Troubleshooting Problem Solution Result Plug power cable in, press Power button. Correct
ページ16に含まれる内容の要旨
A A dv1 2 vesa 1 component 3 L R trigger audio in S-video 4 serial control video 5 v vesa 1 d 1 2 component 3 L trigger R audio in S-video 4 serial control video 5 A Signal out of range Adjust computer refresh rate in Control Computer image projected No computer image, just the words “Signal out of Panel>Display>Settings>Advanced> range” Adapter (location varies by operating system) You may also need to set a different resolution on your computer. Turn Overscan on in the Picture>Overscan Co
ページ17に含まれる内容の要旨
vesa 1 dv1 2 component 3 gge L R ri r audio in serial con rol S-video 4 video 5 t t Projector troubleshooting Problem Solution Result Square image Image not square Adjust keystone on keypad or Picture menu Adjust the focus lens or Sharpness in the Correct image Image not sharp Picture>Advanced menu AB AB AB Change aspect ratio to 16:9 in Picture>Aspect ratio menu Correct image Image does not fit 16:9 screen 15
ページ18に含まれる内容の要旨
B A Turn off Ceiling in Settings>System menu Correct image Image upside down AB Turn off Rear in Settings>System menu Image reversed left to right Correct image A AB 16
ページ19に含まれる内容の要旨
vesa 1 dv1 2 component 3 L R trigger audio in S-video 4 serial control video 5 dv1 2 vesa 1 component 3 L trigger R audio in S-video 4 serial control video 5 dv1 2 vesa 1 component 3 L R trigger audio in S-video 4 serial control video 5 1. Adjust color, tint, color temperature, 1. Projected colors don’t match source brightness, or contrast in the menus. 2. Select another gamma setting 2. Colors are washed out or too deep 3. Select another color space Correct image 3. Image from component source
ページ20に含まれる内容の要旨
dv1 2 vesa 1 o ponent 3 L R trigger audio in S-video 4 serial control video 5 c m vesa 1 dv1 2 component 3 L R trigger audio in S-video 4 serial control video 5 vesa 1 dv1 2 component 3 L R trigger audio in S-video 4 serial control video 5 vesa 1 dv1 2 component 3 L R trigger audio in S-video 4 serial control video 5 vesa 1 dv1 2 c t omponen 3 L R trigger audio in S-video 4 serial control v deo 5 i Lamp must be replaced (page 32) Lamp won’t turn on, LED blinking red (page 12) Lamp turns on blink
