ページ1に含まれる内容の要旨
OWNER’S MANUAL
DLP PROJECTOR
Please read this manual carefully before operating
your set and retain it for future reference.
HX300G
HX301G
www.lg.com
ページ2に含まれる内容の要旨
DLP PROJECTOR DLP PROJECTOR Warning This is a class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. DE DK ES FI FR GB GR HU IT NL This projector complies with EMC Directive and R&TTE Directive. NO PL PT SE
ページ3に含まれる内容の要旨
Contents Contents Safety Instructions .......................................................4 Adjusting Treble .............................................................................25 TIME Menu Options Names of parts Sleep time Function .....................................................................26 Main Body ..........................................................................................7 Auto Off Function ...............................................................
ページ4に含まれる内容の要旨
Safety Instructions Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ꔈ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause injuries or damage to the projector. After reading this manual, keep it in the place that you can access easily. ꔈ Indoor Installation WARNING Do no
ページ5に含まれる内容の要旨
Safety Instructions Power WARNING Never touch the power plug with Do not plug-in too many items Prevent dust from collecting on a wet hand. into one power outlet. the power plug pins or outlet. This may cause an electric shock It may result in overheating of the out- This may cause a fire hazard! hazard! let and create a fire hazard! Power NOTES Hold the plug firmly when Do not use if the power cord or Ensure the power cord does not unplugging. If you pull the cord, the plug is damaged or any
ページ6に含まれる内容の要旨
Safety Instructions Using WARNING If the projector is in a room that experiences a gas leak, do not touch Always open the lens door or the projector. remove the lens cap when the projector lamp is on. It can cause a fire or a burn by a spark. Using NOTES Do not place heavy objects on Take care not to impact the lens Do not touch the lens of the pro- top of projector. particularly when moving the jector. It is delicate and easily projector. damaged. This may cause mechanical failure or person
ページ7に含まれる内容の要旨
Names of parts Names of parts Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction. Control panel Exhaustion Direction High heat is generated, so do not get near the exhaustion direction during the use. Speaker Focus ring Speaker * Do not touch the lens when usi
ページ8に含まれる内容の要旨
Names of parts Connecting Part Headphone port IR (Remote control sensor) * Do not block the IR port for normal operation USB of remote control. VIDEO IN AUDIO IN Kensington Security System Connector HDMI (Refer to page 13) RGB IN DC IN * When using HDMI/USB connector, if the size of the jack connecting to the connector is too big, they may not be connected. Please use standard size jack. 8
ページ9に含まれる内容の要旨
Names of parts Remote Control INPUT Button POWER Button USB Button MUTE Button BLANK Button VOLUME ∧/∨ Button PAGE ∧/∨ Button RATIO Button AUTO Button MENU Button Q.MENU Button OK ◉, ∧/∨/＜/＞ Button MARK Button BACK Button STILL Button USB control Buttons ( Functions as the STILL button in any mode other than DivX.) KEYSTONE ꔌ,ꔍ Button Installing Batteries CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Open the
ページ10に含まれる内容の要旨
Names of parts Accessories Remote Control AAA Battery Owner’s manual CD Owner’s manual Power Cord Computer Cable AC-DC Adapter RGB to Component Cable Portable bag Polishing Cloth ▪ U se a remote control up to 6 m distance and 30° (left/right) within the receiving unit scope. ▪ We recommend you to use the remote control under 3 m distance and 30° (left/right) when the cables are connected in the back outputs. ▪ When you carry the remote control in the portable bag, make sure that the buttons
ページ11に含まれる内容の要旨
Installing and Composition Installing and Composition Installation Precautions Provide proper ventilation for this projector. • The projector is equipped with ventilation holes(intake) on • Do not place the projector on a carpet, rug or other similar the bottom and ventilation holes(exhaust) on the front. Do surface. It may prevent a adequate ventilation of the pro- not block or place anything near these holes. Internal heat jector bottom. This product should be mounted to a wall build-up ma
ページ12に含まれる内容の要旨
Installing and Composition Basic Operation of the Projector 1. Place the projector on a sturdy and horizontal surface with the PC or AV source. 2. Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked. Although, slight angles can be c
ページ13に含まれる内容の要旨
Installing and Composition How to install the projector using the tripod * You can install this projector using a tripod for the camera. You can assemble the projector instead of the camera on camera tripod. * When stabilizing the tripod, we recommend using the locking bolt of the standard size 4.5 mm or less.The maximum size allowed for the locking bolt is 6.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.) Part connected to the projector Part connected to t
ページ14に含まれる内容の要旨
Installing and Composition Turning on the Projector 1. Make sure the power cord is connected correctly. 2. Press the POWER button on the top cover or the POWER button on the remote control. (The light on the control panel will be turned on.) • Press the INPUT button on the remote control to select the input signal you want. • When you press the POWER button on the remote control or the POWER button on the control panel when you turn on the projector, the lights for all buttons on the control
ページ15に含まれる内容の要旨
Connection Connection Connecting to a Desktop PC * You can connect the projector to a computer with VGA, SVGA, XGA, SXGA output. * Refer to page 41 for resolutions the projector supports. < How to connect > Audio Cable 1. Connect the RGB IN of the projector and the comput- er output port with a computer cable. 2. C onnect the AUDIO IN of the projector and the com- puter audio output port with an audio cable. * You may have to change the resolution that your PC Computer Cable exports to one
ページ16に含まれる内容の要旨
Connection Connecting to a DVD Player * Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr. < How to connect a HDMI source > HDMI Cable 1. Connect the HDMI of the projector and the HDMI out- put port of the DVD Player with an HDMI cable. 2. Set the DVD Player's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode. < How to connect a Component source > Audio Cable 1. A
ページ17に含まれる内容の要旨
Function Function * The On-Screen Display (OSD) in this manual may be slightly different from your projector. * This operating guide explains operation of RGB(PC) mode mainly. PICTURE Menu Options Picture mode * Use the Picture mode function to set the projector for the best picture appearance. Picture Mode 1. Press the Q.MENU button on the remote control. 2. Press the ＜, ＞ buttons to move to Picture mode. Standard 3. Press the ∧, ∨ button to toggle through the preset picture settings. ꔗ ꔃ ꔗ ꔃ
ページ18に含まれる内容の要旨
Function Advanced Control Function < When Picture Mode is Vivid/Standard/Cinema/Sport/ Game > 1. P ress the MENU button. Then, move to PICTURE with Color Temperature ꔗ ꔃ Medium Move OK PICTURE the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. Dynamic Contrast High Picture Mode : Standard Dynamic Color High • Contrast 50 No •i s Ber iR gh et dn ue cs ts io n 50 Medium 2. P ress the ∧, ∨ buttons to move to Advanced Control • Sharpness 5 Gamma Medium and press the ◉OK button. • Color 70 Bl
ページ19に含まれる内容の要旨
Function - This function enables Expert 1/2. ꔈThis is the function to adjust the overall color of the screen to the feeling you want. a. Method : 2 Points - Pattern: Inner, Outer - Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 ~ +50. White Balance b. Method : 20 Points IRE - Pattern: Inner, Outer - IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 95, 100. You can adjust Red, Green or Blu
ページ20に含まれる内容の要旨
Function SCREEN Menu Options To Change PJT Mode * This function turns the projected image upside down or flips horizontal. PJT Mode 1. Press the Q.MENU button on the remote control. 2. P ress the ＜, ＞ buttons to move to PJT Mode. Front 3. Press the ∧, ∨ button to select a desired item. • Select Rear when projecting from the back of the transparent screen purchased separately. • Select Ceiling when installing the product on the ceiling. • When PJT Mode is Rear/Ceiling, the left/right of the spe
