S PEC F ILE Product Number : PT-LB51S Product Name : Micro-Portable Wireless LCD Projector As of October 2008. Specifications subject to change without notice. < 1 >
ページ2に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Specifications Power supply 100–240 V AC, 50/60 Hz Power consumption 240 W (approx. 4 W in standby mode with fan stopped.) Optical system Dichroic mirror separation/prism synthesis system LCD panel Panel size 0.6˝ (15.24 mm) diagonal, micro lens array (4:3 aspect ratio) Display method Transparent LCD panel (x 3, R/G/B) Drive method Active matrix Pixels 480,000 (800 x 600) x 3, total of 1,440,000 pixels Pixel configuration Stripe Lens Man
ページ3に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S 2 Dimensions (W x H x D) 297 x 57 x 210 mm (11-11/16˝ x 2-7/32˝ x 8-1/4˝)* Weight 1.8 kg (4.0 lbs.) Operating environment Temperature 0°–40°C (32°–104°F) Humidity 20%–80% (no condensation) Remote control unit Power supply 3 V DC (AA battery x 2) 3 Operation range* Approx. 15 m (49´3˝) when operated from directly in front of the signal receptor Dimensions (W x H x D) 48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝) Weight 117 g (4.1 oz) (i
ページ4に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Dimensions unit : mm (inch) NOTE: This illustration is not drawn to scale. 81 (3-3/16˝) 181 (7-1/8˝) 297 (11-11/16˝) Terminals 1 Serial 2 COMPUTER (RGB) 1 input 12 3 4 5 6 3 COMPUTER (RGB) 2 input/COMPUTER (RGB) 1 output 4 S-Video input 5 Audio input for Video/S-Video 6 Audio input for COMPUTER 1/2 7 Video input 8 Audio output 78 As of October 2008 < 4 > 39 210 (8-1/4˝) (1-1/2˝) 69 (2-23/32˝) 69 (2-7/16˝) 7 (9/32˝) 57 (2-1/4˝)
ページ5に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Standard setting-up positions unit : mm (inch) ø49 (1-15/16˝) Upper edge of projected image ø43 (1-11/16˝) L: Distance to screen L E: Height from the edge of screen to 93.5 (3-11/16˝) Projected image center of lens L Lower edge of projected image NOTE: Illustrations show the projector installed using optional ceiling bracket. This illustration is not drawn to scale. 70 (2-3/4˝) L Projected image * This distance is especially recommend-
ページ6に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 100 MHz. The display resolution of this projector is 1,024 x 768 pixels. Input signals that exceed this resolution will be converted to 1,024 x 768 pixels. List of compatible signals Display mode Display Scanning frequency Dot clock Picture For
ページ7に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, com- mands must be input through communication software, based on the format and satisfying the commu- nication conditions shown below. SERIAL 8-pin DIN (male) PC CAUTIION Serial adapter Be sure to see that an optional serial adapter ET-ADSER and a ET-ADSER RS-232C communication cable match the PC to be connected. Communication
ページ8に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Control commands Command: Function Callback: Parameter value Min Max 1 PON* Power on (standby mode on) PON – – 1 POF* Power off (standby mode off) POF – – AVL: Volume control AVL: 0 63 IIS: Input signal selection IIS: – – OST The same function as “default” button OST – – OFZ: Freeze OFZ: 0 1 OEN Enter OEN – – VPM: Picture mode VPM: – –
ページ9に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Parameter format Parameter format Size (Byte) Difinition 3 (1 or 2 bytes also Dicimal without signs: 0-999 (000, 001, 002...999) possible when Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99) under control) Callback from the projector is 3 Byte. 1 0 = off, 1 = on 3 RG1 = computer 1, RG2 = computer 2, VID = video, SVD = S-Video 1 0 = front, 1 = rear, 2 = ceiling and front, 3 = cei
ページ10に含まれる内容の要旨
S PEC F ILE Micro-Portable Wireless LCD Projector PT-LB51S Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 150 mm (5-29/32˝) or more around the projector’s exhaust openings. 3. If the projector is placed in a box or enclosure, ensure the temperature of the air surr
