ページ1に含まれる内容の要旨
Functional Instructions
DLP™Based Projector
Commercial Use
Model No. PT-DZ6710
PT-DZ6700
PT-DW6300
PT-D6000
PT-D5000
The information of these instructions are shared use with multiple models of DZ6710 series, DZ6700 series, DW6300 series,
D6000 series and D5000 series.
TQBJ0299- 3
ENGLISH
ページ2に含まれる内容の要旨
Getting Started Settings Appendix Contents ∗ LAMP POWER .............................................................29 STANDBY MODE ...........................................................29 Getting Started RS-232C .........................................................................29 REMOTE2 MODE...........................................................29 Setting up.....................................................................3 STATUS............................................
ページ3に含まれる内容の要旨
SD Setting up Screen size and throw distance When planning the projector and screen geometry, refer to the figures below and the information on the following pages for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens shifting mechanism. Projected image Shown as 16:10 SW Screen L (LW/LT) Projection distance SH Height of the projection area SW Width of the projection area Vertical distan
ページ4に含まれる内容の要旨
Getting Started Setting up Projection distance by projection lens PT-DZ6710/PT-DZ6700 16:10 (Unit: m) Lens type Optional lens Standard zoom lens Lens names ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 Height Through ratio 1.8 - 2.4:1 0.8:1 1.3 - 1.9:1 2.3 - 3.6:1 3.6 - 5.4:1 5.5 - 8.6:1 SD SH SW LW LT Fixed LW LT LW LT LW LT LW LT H 0.673 1.077 1.90 2.57 0.83 1.38 2.01 2.42 3.87 3.80 5.82 5.66 9.12 0 - 0.34 50'' 2'2'' 3'6'' 6'2'' 8'5'' 2'8'' 4'6'' 6'7'' 7'11'' 12'8'' 12'5'' 19'1'' 18'6'
ページ5に含まれる内容の要旨
Setting up PT-DW6300 16:10 (Unit: m) Lens type Optional lens Standard zoom lens Lens names ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 Height Through ratio 1.8 - 2.4:1 0.8:1 1.4 - 2.0:1 2.4 - 3.8:1 3.8 - 5.7:1 5.6 - 9.0:1 SD SH SW LW LT Fixed LW LT LW LT LW LT LW LT H 0.673 1.077 1.92 2.56 0.87 1.45 2.12 2.54 4.06 4 6.11 5.96 9.6 -0.07 - 0.34 50'' 2'2'' 3'6'' 6'3'' 8'4'' 2'10'' 4'9'' 6'11'' 8'4'' 13'3'' 13'1'' 20' 19'6'' 31'5'' -2'' - 1'1'' 0.808 1.292 2.32 3.08 1.06 1.75 2.55 3.07 4.89
ページ6に含まれる内容の要旨
Getting Started Setting up PT-D6000/PT-D5000 16:10 (Unit: m) Lens type Optional lens Standard zoom lens Lens names ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 Height Through ratio 1.8 - 2.4:1 0.8:1 1.3 - 2.0:1 2.4 - 3.7:1 3.7 - 5.6:1 5.5 - 8.9:1 SD SH SW LW LT Fixed LW LT LW LT LW LT LW LT H 0.762 1.016 1.79 2.38 0.81 1.34 1.97 2.36 3.78 3.71 5.68 5.53 8.91 0 - 0.38 50'' 2'6'' 3'4'' 5'10'' 7'9'' 2'7'' 4'4'' 6'5'' 7'8'' 12'4'' 12'2'' 18'7'' 18'1'' 29'2'' 0 - 1'2'' 0.914 1.219 2.16 2.86 0
ページ7に含まれる内容の要旨
Setting up Calculation formulas for projection distance by lens types Names Type Through ratio Aspect ratio Projection distance formula • PT-DZ6710/PT-DZ6700 LW = 0.0395 x SD - 0.0744 16:10 LT = 0.0529 x SD - 0.0734 Standard zoom lens 1.8 - 2.4:1 LW = 0.0406 x SD - 0.0745 16:9 LT = 0.0544 x SD - 0.0734 16:10 LW = 0.0175 x SD - 0.0476 ET-DLE055 Fixed-focus lens 0.8:1 16:9 LT = 0.0180 x SD - 0.0476 LW = 0.0286 x SD - 0.0540 16:10 LT = 0.0413 x SD - 0.0498 ET-DLE150 Wide-angle zoom lens 1.3 - 1.8:
ページ8に含まれる内容の要旨
Getting Started Setting up Geometric adjustment VERTICAL KEYSTONE HORIZONTAL KEYSTONE (Side view) (Top view) Screen Screen VERTICAL ARC HORIZONTAL ARC (Side view) (Top view) L2: Projection distance R2: Radius of the circle (Side view) (Top view) Screen Screen L3: Projection distance R3: Radius of the circle Standard ET-DLE055 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 VERTICAL KEYSTONE 40 30 40 40 40 40 Correction angle α (° ) HORIZONTAL KEYSTONE 15 15 15 15 15 15 Correction angle β (° ) VERTICAL
ページ9に含まれる内容の要旨
Setting up Front leg adjusters and throwing angle You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle. ST STANDBY(RED)/ ANDBY(RED)/ LAMP LAMP TEMP TEMP FIL FILTER TER ON(GREEN) ON(GREEN) NOTE: • Heated air comes out of the air exhaust port. Do not touch the air exhaust port directly. ENGLISH - 9 Getting Started
ページ10に含まれる内容の要旨
Getting Started Connections Before connection to the projector Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off. Use cables that match each peripheral device to be connected. If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective. Confirm the type of video signals. The projector accepts the following signals: VIDEO, S-VIDEO, analogue
ページ11に含まれる内容の要旨
Connections Connecting example: Computers Control Computers Projector 1 Projector 2 Control NOTE: • For the specifications of the RGB signals that can be applied from the computer, see the data sheet of the operating instructions that is provided with the projector. • If your computer has the resume feature (last memory), the computer may not function properly until the resume capability is disabled. • When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD term
ページ12に含まれる内容の要旨
Settings Menu Navigation Main menu and Sub-menu The menu options are structured and categorised. You can CLOCK PHASE page 19 navigate through the menu with F G I H buttons. See “Menu (Default: 16) Navigation” on page 12. GEOMETRY page 19 The underlined items are factory default settings. Some default settings vary by the selected input signal. (PT-DZ6710 only) Sub-menu items vary according to the selected input signal. OFF KEYSTONE Some settings are adjustable without any signals. CURVED P
ページ13に含まれる内容の要旨
Menu Navigation INSTALLATION page 28 DISPLAY OPTION FRONT/FLOOR FRONT/CEILING REAR/FLOOR REAR/CEILING COLOR MATCHING * page 25 HIGH ALTITUDE MODE page 28 OFF 3 COLORS OFF ON 7 COLORS MEASURED COOLING CONDITION page 28 COLOR CORRECTION page 25 FLOOR SETTING OFF USER VERTICAL DOWN SETTING CEILING SETTING CONTRAST MODE * page 25 VERTICAL UP SETTING NORMAL HIGH LAMP SELECT page 29 SCREEN SETTING page 25 DUAL SINGLE SCREEN FORMAT LAMP1 LAMP2 16:10 16:9 4:3 LAMP RELAY page 29 SCREEN POSITION OFF 00:0
ページ14に含まれる内容の要旨
Settings Menu Navigation SECURITY NETWORK SECURITY PASSWORD page 35 NETWORK SETUP page 37 OFF ON HOST NAME DHCP SECURITY PASSWORD CHANGE IP ADDRESS SUBNET MASK DEFAULT GATEWAY STORE page 35 NETWORK CONTROL page 37 DISPLAY SETTING page 35 WEB CONTROL OFF TEXT PJLink CONTROL LOGO1 LOGO2 COMMAND CONTROL COMMAND PORT TEXT CHANGE page 35 STORE MENU LOCK page 36 NETWORK STATUS page 37 OFF ON DHCP IP ADDRESS MENU LOCK PASSWORD page 36 SUBNET MASK DEFAULT GATEWAY DNS1 DNS2 CONTROL DEVICE SETUP page 36
ページ15に含まれる内容の要旨
Menu Navigation Navigating through the menu Displaying the main menu Operating procedure Press the MENU button to display the main menu. 1. Press F G to scroll to the required main menu item and press the ENTER button to select. The selected item is highlighted in orange and the sub- MAIN MENU menu is displayed. PICTURE See “Main menu and Sub-menu” on page 12. POSITION ADVANCED MENU MAIN MENU DISPLAY LANGUAGE PICTURE DISPLAY OPTION POSITION PROJECTOR SETUP ADVANCED MENU TEST PATTERN DISPLA
ページ16に含まれる内容の要旨
Settings PICTURE menu Remote control COLOR You can adjust the colour saturation of the projected image. Call up the bar scale by pressing I, H or the ENTER button, and press I H to adjust the value. I Lighter H Darker See “Navigating through the menu” on page 15. Setting range: -31 to +31 See “Main menu and Sub-menu” on page 12. TINT PICTURE MODE You can adjust the skin tone in the projected image. Call up the Depending on the projection environment, you can use these bar scale by pressing
ページ17に含まれる内容の要旨
PICTURE menu WHITE GAIN NOISE REDUCTION You can adjust the brightness of white area of the image. Call You can select the automatic noise reduction system strength. up the bar scale by pressing I, H or the ENTER button, and Press I H to cycle through the options. press I H to adjust the value. OFF Deactive I More natural white 1 Low H Whiter 2 Middle Setting range: 0 to +10 3 High SYSTEM DAYLIGHT VIEW AI You can keep the projected image bright and vivid even in well- You can switch on/off the a
ページ18に含まれる内容の要旨
Settings POSITION menu S1 AUTO Remote control Detects signals which contain S1 signal in input signal, and automatically switch the aspect ratio between 4:3 and 16:9. Effective with S-VIDEO (NTSC) signals. VID AUTO(PRI.) Detects signals which contain video ID or S1 signal in input signal, and automatically switch the aspect ratio See “Navigating through the menu” on page 15. between 4:3 and 16:9. Detects video ID on a priority See “Main menu and Sub-menu” on page 12. basis. Effective wi
ページ19に含まれる内容の要旨
POSITION menu Menu items displaying pattern depends on signals Signals from RGB 1 IN/RGB 2 IN/DVI-D IN and SDI (PT-DZ6710 only) DEFAULT H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H DEFAULT Signals from S-VIDEO IN VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO Signals from other terminals VID AUTO H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO NOTE: • If you project an image with an unmatched aspect ratio, the image may distort
ページ20に含まれる内容の要旨
Settings POSITION menu GEOMETRY:KEYSTONE GEOMETRY:CURVED Select KEYSTONE and press the ENTER button to Select CURVED and press the ENTER button to display display the options. the options. VERTICAL KEYSTONE LENS THROW RATIO Press I H to adjust throw ratio of the attached lens. VERTICAL KEYSTONE VERTICAL SUB KEYSTONE HORIZONTAL KEYSTONE HORIZONTAL KEYSTONE VERTICAL ARC HORIZONTAL SUB KEYSTONE HORIZONTAL ARC LINEARITY VERTICAL BALANCE HORIZONTAL BALANCE NOTE: • When GEOMETRY setting is set, dis
