ページ1に含まれる内容の要旨
Multimedia Projector
Network Supported
Refer to the Owner's Manual below for
MODEL PLC-XM80
details about network function.
£ Network Set-up and Operation
◊
PLC-XM80L
◊
Projection lens is optional.
Owner’s Manual
ページ2に含まれる内容の要旨
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. t Functionally Rich t Motor-driven Lens Shift This projector has many useful functions such Projection lens can be moved up, down, right and as lens shifting, ceiling and rear projection, left with the motor-driven lens
ページ3に含まれる内容の要旨
Table of Contents Features and Design . . . . . . . . . . . . . . . Input Selection . . . . . . . . . . . . . . . . . . . Direct Operation 33 Table of Contents . . . . . . . . . . . . . . . . . . Computer Input Source Selection 34 To The Owner . . . . . . . . . . . . . . . . . . . . . 4 Video Input Source Selection 35 Safety Instructions . . . . . . . . . . . . . . . . . 5 Computer Input . . . . . . . . . . . . . . . . . . . 6 Air Circulation 6 Computer System Selection 36 Installing
ページ4に含まれる内容の要旨
To The Owner Before installing and operating the projector, read this Safety Precaution manual thoroughly. WARNING: l THIS APPARATUS MUST BE EARTHED . The projector provides many convenient features and l TO REDUCE THE RISK OF FIRE OR functions. Operating the projector properly enables ELECTRIC SHOCK, DO NOT EXPOSE you to manage those features and maintains it in good THIS APPLIANCE TO RAIN OR condition for many years to come. MOISTURE . Improper operation may result in not only short
ページ5に含まれる内容の要旨
Safety Instructions This projector should be operated only from the type of power All the safety and operating instructions should be read before source indicated on the marking label. If you are not sure of the product is operated. the type of power supplied, consult your authorized dealer or local power company. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before Do not overload wall outlets and extension cords as this
ページ6に含まれる内容の要旨
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it IMPORTANT! from overheating, these openings must not be blocked or Filter Maintenance!! covered. The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the CAUTION filter is located in the intake vents to prevent dust from getting i
ページ7に含まれる内容の要旨
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up. PNote: To inverse or reverse the image, set the ceili
ページ8に含まれる内容の要旨
Safety Instructions Moving the Projector Notes on protector Remove the protector on the lens before use, and keep it for later use. For transportation, press and hold the LENS button or LENS SHIFT button to adjust the lens to the central position when four arrows turn to red, and then attach the protector to protect the lens. (Only for PLC-XM80). Protector Use the handle grip when moving the projector. Retract the adjustable feet to prevent damage to the
ページ9に含まれる内容の要旨
Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
ページ10に含まれる内容の要旨
Part Names and Functions ① ① Lens Release Button Front ③ ② ② Indicators ③ Lamp Cover ④ Speaker ⑤ Lens Cap (for PLC-XM80) ⑥ Projection Lens (for PLC-XM80) ⑦ Lens Mount Cover (for PLC-XM80L) ⑧ Infrared Remote Receiver (Front & Top) ⑨ Side Controls ④ ⑤ ⑥ ⑧ ⑨ ⑩ ⑩ Exhaust Vent ⑦ CAUTION Back ⑫ Hot air is exhausted from the exhaust vent. Do ⑪ ⑬ ⑩ not put heat-sensitive objects near this side. ⑪ Infrared Remote Receiver (Back) ⑫ Terminals and Connectors ⑬ Filter Cover & Air Intake
ページ11に含まれる内容の要旨
Part Names and Functions Rear Terminal ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑩ ◊ ⑨ ⑪ ⑫ ⑬ ⑭ ⑮ ① INFRARED REMOTE RECEIVER (Back) ⑩ S-VIDEO INPUT jACK The infrared remote receiver is also located in the front and top Connect the S-VIDEO output signal from video (pp.10, 15). equipment to this jack (p.20). ② LAN CONNECTION TERMINAL ⑪ VIDEO INPUT jACK Connect the LAN cable (refer to the owner’s manual of “Network Connect the component or the composite video Set-up and Operation”). output signal from video equipment t
ページ12に含まれる内容の要旨
Part Names and Functions Side Control and Indicators Side Control Indicators (on the top panel) ① ⑧ ⑨ ② ⑦ ③ ⑩ ⑪ ④ ⑥ ⑫ ⑬ ⑤ ① ON/STAND-By button ⑨ LAMP indicator Turn the projector on or off (pp.23-24). Light red during operations. ② MENU button ⑩ WARNING TEMP . indicator Open or close the On-Screen Menu (p.25). Blink red when the internal temperature of the ③ SELECT button projector exceeds the operating range (pp.69, – Execute the selected item (p.25). 76-78). – Expand or compress the ima
ページ13に含まれる内容の要旨
Part Names and Functions Remote Control ③ ② ① ④ ⑤ ⑬ ⑥ ⑭ ⑦ ⑫ ⑧ ⑪ ⑨ ⑩ ① STAND-By button ⑩ MOUSE POINTER button Turn the projector off (p.24). Move a pointer of the projector or a pointer for wireless mouse operation (p.32). ② WIRED REMOTE jack Connect the remote control cable (not supplied) to ⑪ SELECT button this jack when using as a wired remote control. – Execute the selected item (p.25). – Expand or compress the image in the Digital ③ SIGNAL EMISSION indicator zoom mode (p.43). Light r
ページ14に含まれる内容の要旨
Part Names and Functions Remote Control ㉕ ⑮ ㉔ ⑯ ㉓ ㉖ For PIN code ㉒ and remote control code. ⑰ ㉑ ⑱ ⑲ ⑳ ⑮ D .ZOOM button ㉒ FREEZE button Select the Digital zoom +/- mode and resize the Freeze the picture on the screen and mute the image (p.43). sound (p.30). ⑯ INPUT 1- buttons ㉓ P-TIMER button Select an input source (INPUT 1 – INPUT 3) Operate the P-timer function (p.30). (pp.33-35). ㉔ R-CLICK button ⑰ KEySTONE button Act as the right mouse button for wireless mouse Correct keys
ページ15に含まれる内容の要旨
Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries into Replace the compartment lid. the compartment. compartment lid. 1 Press the lid downward and Two AAA size batteries slide it. For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. To ensure safe operation, please observe the following precautions : ü Use two (2) AAA or LR03 type alkaline batteries. ü Always replace batteries in sets.
ページ16に含まれる内容の要旨
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 56. Press and hold the MENU and a num
ページ17に含まれる内容の要旨
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-XM80) PNote: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. (Inch Diagonal) 75.1' (22.9 m) 44.3’(13.5 m) 33.2’(10.1 m) Max. Zoom 400” 400” 22.0’ (6
ページ18に含まれる内容の要旨
Installation Lens Installation When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Removing the lens Shift the lens to the center position by using the Lens 1 Lens release button shift function (p.27). Turn off the projector and unplug the AC power cord. While pressing the Lens release button on the top of the cabinet, turn the lens counterclockwise unti
ページ19に含まれる内容の要旨
Installation Connecting to a Computer (Digital and Analog RGB) ⁄ Cables used for connection ( = Cables not supplied with this projector.) • VGA Cable (One cable is supplied.) • Serial Cross cable ⁄ • DVI-Digital cable ⁄ • USB cable • BNC cable ⁄ Monitor Output Serial out Monitor Input Monitor Output Monitor Output USB port USB BNC Serial Cross VGA VGA DVI-Digital cable cable cable cable cable cable G B R H/V V CONTROL PORT ANALOG OUT ANALOG IN DIGITAL IN USB Unplug the power cords
ページ20に含まれる内容の要旨
Installation Connecting to Video Equipment (Video, S-video) ⁄ Cables used for connection ( = Cables not supplied with this projector.) • Video cable (RCA x 1 or RCA x 3) ⁄ Analog Out Signal Table • BNC cable (BNC x 1 or BNC x 3) ⁄ Input Terminal Monitor Out Cable RGB (PC analog) YES • S-video cable ⁄ ⁄ A cable with one D-sub15 RGB (SCART) NO • Scart-VGA cable ⁄ Input 1 end D-sub 15 and RGB (PC digital) NO • DVI-Digital cable ⁄ DVI-D the other end (Black RGB (AV HDCP) NO box) compatible with
