ページ1に含まれる内容の要旨
Operating Instructions
(For Basic Operations)
Electronic Board
(elite Panaboard)
Model No. UB-T781
UB-T781W
UB-T761
UB-T781
Stand is sold separately.
Installation Manual Included (for qualified service personnel)
• To assemble this unit, please refer to the Installation Manual on pages 37 through 60.
Before operating this unit, please read these instructions completely and keep them carefully for future
reference.
This unit is designed for installation by a qualified servicing dealer.
Insta
ページ2に含まれる内容の要旨
Introduction Introduction Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Feature Highlights By connecting the elite Panaboard to a computer and using a projector to display the contents of the computer’s screen on the elite Panaboard, you can do the following. Electronic Pen Features • Manipulate objects on the computer screen by using the electronic pen as a mouse. • Draw and erase lines on the computer scre
ページ3に含まれる内容の要旨
Introduction Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Serial number Dealer’s name 1 Dealer’s address Dealer’s tel no. About the Operating Instructions There are 2 separate operating manuals for the elite Panaboard. For Basic Operations Instructions for connecting and operating the elite Panaboard, as (this document) well as instructions for installation construction. Instructions for the included elite Panaboard software and eli
ページ4に含まれる内容の要旨
Introduction Abbreviations ® ® ® Windows refers to the Microsoft Windows operating system. ® ® ® Windows 2000 refers to the Microsoft Windows 2000 operating system. ® ® ® Windows XP refers to the Microsoft Windows XP operating system. ® ® ® Windows Vista refers to the Microsoft Windows Vista operating system. ® ® ® DirectX refers to the Microsoft DirectX application programming interface. Trademarks • Microsoft, Windows, Windows Vista, DirectX, and Windows Media are either registered trademarks
ページ5に含まれる内容の要旨
Introduction Warning about saving data When the system storage device or any of its optional storage device is adversely effected by operational errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction, repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a point of reading the precautionary notes in the Operating Instructions and the help information, and observe them during operation. P
ページ6に含まれる内容の要旨
Introduction Exemption of Liability Panasonic Communications Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to, the following: 1. Altering the device or improper installation construction. 2. Using the device for purposes beyond its intended use. 3. Earthquake, fire, flood, tidal wave, hurricane, lightning or other natural phenomena. 4. Natural aging of the building or similar phenomena. For FRG Users (For Germany Only) Note Machine noise information regulation
ページ7に含まれる内容の要旨
Table of Contents Table of Contents For Your Safety ........................................................................................8 For Your Safety .................................................................................................................8 For Users ...........................................................................................................................8 Safety Information (For United Kingdom Only) ...............................................
ページ8に含まれる内容の要旨
For Your Safety For Your Safety For Your Safety For Users To prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper WARNING and safe operation of your unit. • This section explains the graphic symbols used in this manual. Power and Ground Connection The power source voltage of this unit is Denotes a potential listed on the nameplate. Only plug the hazard that could unit into an AC outlet with the proper WARNING result in serious voltage. If you
ページ9に含まれる内容の要旨
For Your Safety Installation and Relocation Plug the power cord firmly into an AC outlet. Otherwise, it can cause fire or Have the unit installed, removed and electric shock. disposed of only by qualified service personnel. Do not pull, bend, rest objects on, or chafe the power cord and plug. Damage When the unit will no longer be used, in to the power cord or plug can cause fire order to prevent it from falling, do not or electric shock. leave the unit installed, but remove it. If the unit fall
ページ10に含まれる内容の要旨
For Your Safety Make sure that the battery is installed with the correct polarity as indicated on CAUTION the battery holder. Incorrectly installed batteries may burst or leak, resulting in injuries. Power Batteries that seem worn down or damaged should not be used. Using When the unit is not used over an worn down or damaged batteries may extended period of time, switch it off and result in leaking. unplug it. If an unused unit is left connected to a power source for a long period, degraded ins
ページ11に含まれる内容の要旨
For Your Safety After installing or moving the unit, lock Safety Information (For the casters and set the fall-prevention extension legs. United Kingdom Only) This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the Locking the casters (Push
ページ12に含まれる内容の要旨
For Your Safety As the colours of the wire in the mains lead of this Precautions apparatus may not correspond with the coloured markings identifying the terminals in your plug, About Using the Battery proceed as follows. If a battery is used improperly, the battery may leak, The wire that is coloured GREEN-AND-YELLOW causing corrosion of the unit, or it may burst. To prevent must be connected to the terminal in the plug which this, always follow the precaution given below. is marked with the let
ページ13に含まれる内容の要旨
For Your Safety Warning Label 1 TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. WARNING: NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PBQAA0582ZA Operating Instructions (For Basic Operations) 13
ページ14に含まれる内容の要旨
Usage Usage Included Accessories Check that all of the following items are included with your elite Panaboard. In the event that an item is missing, please contact your dealer. List of Accessories Power Cord USB Cable 1 1 Software CD-ROM 1 1 7 (3 m [9 ft. 10 /8 in.]) (5 m [16 ft. 4 /8 in.]) AAA Battery (LR03) Penpoint 1 Electronic Pen 1 2 (Disposable) (Replacement) Operating Instructions (For Basic Operations) 1 Warranty 1 (this document) Note • The illustration of the power cord shown above is
ページ15に含まれる内容の要旨
Usage Names and Uses of the Parts Screen Front View Position Sensor Detects the position of the electronic pen. Do not block the sensor while operating the elite Panaboard. Screen Board Project the contents of a computer screen using a projector. 1 Power Switch Pen Tray Push the center of the door to open the pen tray, which can hold up to 2 electronic pens. USB Speaker Outputs sound from a computer or the audio input port in stereo. Volume Dial Adjusts the volume of the speaker. The volume
ページ16に含まれる内容の要旨
Usage Rear View AC Inlet Power Cord Notice • The elite Panaboard is designed exclusively for projector images. Do not write on the screen board with a white-board marker. • The operation of external devices connected via the USB hub is not guaranteed. • External devices connected via the USB hub that require a lot of power, such as scanners or CD/ CD-Rs, may not operate properly. For more information, please consult the relevant dealer. Electronic Pen Penpoint When you push down on the penpoint,
ページ17に含まれる内容の要旨
Usage Notice • Use the electronic pen by holding it at a right angle to the screen board. Holding it at an angle can cause its position to be read incorrectly. 1 • Do not use multiple pens at the same time. This can result in erroneous operation. • Do not push the penpoint while holding the pen close to the elite Panaboard. Doing so can cause erroneous behavior. Note • The electronic pen switches to power-save mode after about 30 minutes. • When waking up the pen from power-save mode by pushing
ページ18に含まれる内容の要旨
Usage Connecting External Components 1. Set the power switch to "O" (OFF), connect the power cord (included) to the elite Panaboard, and plug the power cord into an AC outlet. Rear Power Switch (ON) (OFF) Power Cord (Included) Power Cord • Plug the power cord into an outlet that is close to the elite Panaboard and in a location that is easy to unplug. • If you are using the optional stand, plug the power cord into the AC inlet, and secure the cord as shown in the illustrations below. When attac
ページ19に含まれる内容の要旨
Usage 2. Connect the elite Panaboard to a computer using the USB cable (included). • elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port. Computer: Plug the A connector (larger connector) into a USB port on the computer. • Do not connect the elite Panaboard via a USB hub. This could result in erroneous operation. To USB Port USB Cable (Included) 1 Projector Computer AC AC Video Cable 3. Connect the computer to a projector. • For instructions on connectin
ページ20に含まれる内容の要旨
Usage Connecting External Devices 1. Connect the external device to the elite Panaboard using a USB cable (sold separately). • elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard’s USB port. External device: Plug the B connector (smaller connector) into a USB port on the external device. To USB Port USB Cable (Sold Separately) To USB Port MFP Flatbed Scanner About the Usage Location • Do not place the elite Panaboard where it is directly exposed to sunlight, near a
