ページ1に含まれる内容の要旨
USER GUIDE
GDI-IRD4400M
BRAVADO Internet Radio and Network Media Player 1
ページ2に含まれる内容の要旨
Table Of Contents Safety Warnings ...................................................................................................................... 4 Internet Radio and Network Music Player Quickstart Guide .................................................. 5 What you need before you can use your Internet radio ..............................................................5 Radio Controls .....................................................................................................
ページ3に含まれる内容の要旨
Table Of Contents Browsing the list of tracks currently (queued up) for playback ....................................................28 Removing tracks from the list (queue) ..........................................................................................28 Playing tracks in random order ....................................................................................................29 Playing tracks in the list (queue) repeatedly .................................................
ページ4に含まれる内容の要旨
Safety Warnings Please read before installation. If this Internet radio has been moved from a cold place to a warm place, DO NOT plug it in for 2-3 hours (e.g. from a cold car boot to a warm room). There is a possibility that moisture may have condensed in the Internet radio, this can cause damage to your Internet radio. To avoid damage please unpack your Internet radio and allow it to stand at room temperature for 2-3 hours before use. This will help any moisture evaporate and prevent unnec
ページ5に含まれる内容の要旨
INTERNET RADIO QUICKSTART GUIDE What You Need Before You Can Use Your Internet Radio and Network Streamer Before you can use your Internet radio, you need the following: • A broadband Internet connection. • A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router. • If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption then you need to know the WEP or WPA / WPA 2 code so you can get the
ページ6に含まれる内容の要旨
Radio Controls CONTROL INTERNET RADIO MODE MEDIA PLAYER MODE STANDBY/ON Press to turn on/off the Internet Radio Same Go back to previous menu page Same / P1 Press and hold for 2 seconds to store Play/Pause Preset station P1 Press to listen to Preset station P1 / P2 Press and hold for 2 seconds to store Stop Preset station P2 Press to listen Preset station P2 / P3 Press and hold for 2 seconds to store Previous Track Preset station P3 Press to listen Preset station P3 / P4 Press and hold for
ページ7に含まれる内容の要旨
CONTROL INTERNET RADIO MODE MEDIA PLAYER MODE PUSH / Pushing the select button inwards will activate Same Volume Knob the currently selected menu item. Turning the knob clockwise or counterclock- wise will increase or decrease the volume. This knob will also move up or down in the menu items then push the button inward to select the item. If you did not want to activate the item, press the ‘back’ button to go to the previous menu JACKS DESCRIPTION RCA Connect RCA cables to plug optional ext
ページ8に含まれる内容の要旨
Remote Control CONTROL INTERNET RADIO MODE MEDIA PLAYER MODE POWER Press to turn off the Internet Radio Same MUTE Press to turn off/on the volume Same Arrow Keys Press to navigate throughout various Same menus and selections Go back to previous menu page Same OK Push to select menu items, stations etc. Same No Function Play/Pause No Function Previous Track No Function Stop No Function Next Track Menu To the main menu No Function Browse No Function No Function Vol –/+ Increase and decrease volume
ページ9に含まれる内容の要旨
Steps For Connecting Your Radio To Your Wireless Network Step 1 - Power up the radio First, connect to the AC Power. The radio can be switched on or off with the STANDBY/ON button. The display on the front of the radio will light up and indicate: Grace Digital Radio After a few seconds, this will change to show: Initializing Network After a few seconds, this will change to show: < Scan for networks > Enter network View Config Edit Config Step 2 - Scan for a wireless network connection
ページ10に含まれる内容の要旨
Steps For Connecting Your Radio To Your Wireless Network (Continued) If it can’t find one then the display will show: No networks Found If this happens then you will have to setup your wireless access point - see the instructions supplied with your wireless router / access point. When the radio finds your wireless network, it displays the ESSID for the access point on the screen - this is a name that is allocated to the access point by the person who set up your network - for example: <
ページ11に含まれる内容の要旨
Steps For Connecting Your Radio To Your Wireless Network (Continued) Then: Network OK If the screen displays either: Enter WEP key Or: Enter WPA key Then your network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA). You therefore need to enter the correct WEP or WPA code into the radio to get it to communicate with your network. Only the person who set up the network in the first place knows this code; if that person is not you then you
ページ12に含まれる内容の要旨
Choosing A Radio Station To Listen To 1. Press the ‘Select’ button. (Note: if you make a mistake at any point, press the ‘Back’ button to go back to the previous screen.) Internet Radio Personal Radio My Stuff 2. If the screen does not show < Internet radio > as shown above, turn the knob until it does. Please note that the ‘My Stuff’ folder will only show up after you register your radio onto our web site. 3. Press the ‘Select’ button, to choose . 4. Turn the knob to choose
ページ13に含まれる内容の要旨
4. Press the ‘Select’ button. 5. Turn the knob until the display shows the station you want. 6. Press the ‘Select’ button and wait until the radio connects to that station. Note that some radio stations do not broadcast 24 hours per day, and some stations are not always on-line. If this station has on-demand content (that is, it gives the option of listening to programs which have already been broadcast), see “Stations which enable you to choose what you listen to”. 1. Turn the knob
ページ14に含まれる内容の要旨
Changing The Volume When a radio station is playing, you can increase the volume simply by turning the Volume knob, clock wise. Storing A Radio Station In A Preset (Radio) When a station is playing, hold down one of the preset buttons (1-5) until the screen shows. Assigned to Preset # * Where “#” is the number of the preset button you held down. Storing A Radio Station In A Preset (Remote control) 1. When a station is playing, press the and hold one of the numbers (1-10) on the remote control.
ページ15に含まれる内容の要旨
Requesting A Station That Is Currently Unavailable If you want to listen to a particular radio station which is currently not available online, you can visit the Grace Digital Audio web site at http://iradio.gracedigitalaudio.com/ and enter in a request to add the station to the list. Please note that some radio stations do not pass the audio stream quality test so we are not able to add every request. Typically we can add a station within 10 business days if the station provides us a qualit
ページ16に含まれる内容の要旨
Stations Which Enable You To Choose What You Listen To (Continued) 3. When you have chosen the program you want to listen to, either it will just start playing, or the display may show a list of days for you to choose from - use the knob to set the day the program was broadcast, then press the ‘Select’ button. 4. After you have chosen the day, you may be able to choose the Start Time. Set the Start Time using the knob and press the ‘Select’ button. 5. Program which enable you to choose the
ページ17に含まれる内容の要旨
Setting The Clock (Continued) 5. Turn the knob until the display says . < Set Time/Date > Set Alarm DST 6. Press the ‘Select’ button. Pacific Central Eastern 7. Turn the knob until the correct time zone is seen on the display. Push the ‘Select’ button to set your time zone. Then turn the Menu knob until the hour setting is correct, then press the ‘Select’ button. Set Time 1:30 PM 8. Turn the knob until the minute setting is correct, then press the ‘Select’ button. S
ページ18に含まれる内容の要旨
Setting The Alarm 1. Press the ‘Select’ button. (Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.) 2. Turn the knob until the display shows . Stations < Alarm Clock > Media Player 3. Press the ‘Select’ button. 4. Turn the knob until the display shows . Set Time < Set Alarm > 5. Press the ‘Select’ button. Disable all 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6. Turn the knob to choose between
ページ19に含まれる内容の要旨
Setting The Alarm (Continued) 7. If you choose “Yes” then the display enables you to set the time for the alarm. Set Alarm 15:06 8. After selecting < 1 Off 12:00 AM> you can choose the time to set the Alarm. Set Alarm 12:00 AM 9. Turn the knob until the minute setting is correct, then press the ‘Select’ button. Alarm Set: 07:45 10. Turn knob to choose how often you want the Alarm to alarm 11. Turn knob to use either the buzzer or the current radio station that is playing to turn on. The display
ページ20に含まれる内容の要旨
Setting The Sleep Timer 1. Choose Alarm Clock 2. Choose Sleep Timer 3. Then scroll the Select knob form between 30 seconds and 99 hours. When the desired time is reached, Press the select knob. The radio will stay on until the timer is reaches zero. CONFIGURING ‘MY STUFF’ Registering An Account On Grace Digital Audio’s Website 1. Open the website, http://iradio.gracedigitalaudio.com from your internet browser. 2. Click on the ‘Register’ link and follow the on-screen instructions to register a
