ページ1に含まれる内容の要旨
R9942
FM Stereo PLL Synthesised
Personal Radio
Operating Instructions
ROBERTS
ページ2に含まれる内容の要旨
Contents Contents ..........................................................................................1 Controls ...........................................................................................2 Headphones ....................................................................................5 Display ............................................................................................6 Battery .................................................................................
ページ3に含まれる内容の要旨
Controls 2 1 3 4 5 1. DBB/Mono/Stereo switch 4. Area/Memo button 2. LCD display 5. Preset button 3. Power button If you need any further advice, please call our Technical Helpline on :- 2 020 8758 0338 (Mon-Fri)
ページ4に含まれる内容の要旨
Controls 7 6 8 9 6. Tuning + / - buttons 8. Battery compartment 7. Lock switch 9. DX/Local switch 3
ページ5に含まれる内容の要旨
Controls 10 11 12 10. Volume control 11. Neck strap attachment point 12. Earphone socket If you need any further advice, please call our Technical Helpline on :- 4 020 8758 0338 (Mon-Fri)
ページ6に含まれる内容の要旨
Headphones 13 13. Remote button 5
ページ7に含まれる内容の要旨
Display C D E F B A G I H A. Area indicator F. Lock indicator B. Battery indicator G. Preset number C. Dynamic bass boost indicator H. Preset indicator D. Stereo indicator I. Auto preset indicator E. Frequency indicators If you need any further advice, please call our Technical Helpline on :- 6 020 8758 0338 (Mon-Fri)
ページ8に含まれる内容の要旨
Battery 1. Open the battery cover located on the rear of the your radio by sliding it in the direction shown by the arrow. 2. Insert one LR03 (AAA) size battery into the compartment. Ensure that battery is inserted in accordance with the diagram shown on the rear of your radio. 3. Close the battery cover 4. Battery should be replaced when the low battery indicator appears in the display . 5. During battery replacement ensure that the radio is turned off and the Lock switch is in the “Lock” po
ページ9に含まれる内容の要旨
If you need any further advice, please call our Technical Helpline on :- 8 020 8758 0338 (Mon-Fri)
ページ10に含まれる内容の要旨
Lock switch The Lock switch is used to prevent unintentional operation of your radio. 1. Set the Lock switch located on the right side of your radio to the ‘Lock’ position . The power and all other buttons will be disabled, this will prevent accidental operation when your radio is packed in a suitcase or travel bag . 2. To prevent accidental operation of the controls when your radio is switched on, set the Lock switch to the up ‘Lock’ position, the symbol will appear in the display . 3. To rele
ページ11に含まれる内容の要旨
If you need any further advice, please call our Technical Helpline on :- 10 020 8758 0338 (Mon-Fri)
ページ12に含まれる内容の要旨
Earphones Plug the earphones into the Earphone socket located on the top of your radio. Aerials The lead connecting earphones to your radio acts as an FM aerial when plugged into the Earphone socket. The lead should be extended as much as possible to increase reception. 11
ページ13に含まれる内容の要旨
If you need any further advice, please call our Technical Helpline on :- 12 020 8758 0338 (Mon-Fri)
ページ14に含まれる内容の要旨
Auto preset 1. When the battery is inserted into the battery compartment for the first time, with earphones plugged in, your radio will quickly and automatically preset stations in order based upon their signal strength. The display will flash AUTO PRESET. This feature is especially useful for the traveller who can automatically find all the local stations in any city to which he may travel. The radio will switch off automatically after Auto Preset is complete. Up to 9 stations can be stored on
ページ15に含まれる内容の要旨
If you need any further advice, please call our Technical Helpline on :- 14 020 8758 0338 (Mon-Fri)
ページ16に含まれる内容の要旨
Scan tuning 1. Switch on your radio by pressing the Power button or Remote button on the earphones for more than 1.5 sec. 2. Press and hold down either the Tuning + or - buttons until the frequency in the display begins to change rapidly. Release the button. Your radio will scan the FM band and stop automatically when it finds a station of sufficient strength. 3. Adjust the Volume control to the required setting. 4. Press and hold down either the Tuning + or - buttons for more than half a secon
ページ17に含まれる内容の要旨
If you need any further advice, please call our Technical Helpline on :- 16 020 8758 0338 (Mon-Fri)
ページ18に含まれる内容の要旨
Presetting stations Your radio is equipped with 2 area memories. There are 9 preset memories on each area giving a total of 18 preset memories. 1. Switch on your radio and tune into the required station using one of the tuning methods previously described. 2. Press the Area/Memo button, the display will flash PRESET 3. Repeatedly press Preset button to select the required memory preset. 4. Press the Area/Memo button to complete setting of the memory preset . 5. Repeat the above for remaining 8
ページ19に含まれる内容の要旨
If you need any further advice, please call our Technical Helpline on :- 18 020 8758 0338 (Mon-Fri)
ページ20に含まれる内容の要旨
Recalling a preset station Your radio is equipped with 2 Area memories there are 9 preset memories on each area giving a total of 18 preset memories. 1. Switch on your radio and select the required preset area. 2. Repeatedly press and release the Preset button, to select the required preset 3. Presets may also be selected by repeat pressing of the Remote button on the earphones. Note: Pressing the remote button on the earphones for more than 1.5 seconds will switch off your radio. 19
