ページ1に含まれる内容の要旨
Ceramic hob
ZKT 641 H
Installation and Operating Instructions
g
ページ2に含まれる内容の要旨
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
ページ3に含まれる内容の要旨
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cooking surface layout . . . . . .
ページ4に含まれる内容の要旨
Operating Instructions 1 Safety instructions Cables from electrical appliances must not touch 3 Please comply with these instructions. If you the hot surface of the appliance or hot cookware. do not, any damage resulting is not covered Overheated fat and oil can ignite quickly. When by the warranty. cooking with fat or oil (e.g. frying chips) do not leave the appliance unattended. 5 This appliance conforms with the following EU Switch the cooking zones off after each use. Directives: Wit
ページ5に含まれる内容の要旨
Description of the Appliance Cooking surface layout Single cooking zone Double ring cooking zone 1200W 700/1700W Single ring cooking zone Control panel Single cooking zone Halogen 2400W 1200W Control panel layout Cooking zone indicators Lock Heat setting selection Timer function with pilot light Second ring Timer display On/Off Timer Double ring pilot light Display On/Off with power indicator 5
ページ6に含まれる内容の要旨
Touch Control sensor fields The appliance is operated using Touch Control sen- sor fields. Functions are controlled by touching sen- sor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off Switches appliance on and off Increase settings Increasing heat setting/time Decrease settings Decreasing heat setting/time Timer Timer selection Lock Locking/unlocking the control panel Dual zone touch
ページ7に含まれる内容の要旨
Operating the appliance Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds ¾ / h lights up Switch off Touch for 1 second h / none goes out wise the appliance automatically switches it- 3 After switching on, within approx. 10 seconds self off. a heat setting or a function must be set, other- Halogen cooking zone With halogen cooking zones full heat is reached immediately. First place the cookware on the cooking zone and then switch on the cooking
ページ8に含まれる内容の要旨
Using the automatic warm-up function All cooking zones are equpped with an automatic warm up function When setting a heat setting using , when starting from ¾, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set. Control panel possible heat set- Display tings Switch on Touch ¿ to Æa (after 5 seconds) (only when starting at ¾) Switch off Touch Æ to ¿ / u Æ to u Not used Touch Ç to uÇ to u 3 If during the automatic wa
ページ9に含まれる内容の要旨
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel Display/Signal 1. Switch on the appliance ¾ (Do not set a heat setting) 2. Touch until the signal sounds Acoustic signal 3. Touch l Appliance switches off. The child safety device is engaged. Releasing the child safety device Step Control panel Display/Signal 1. Switch on the appliance l 2. Touch until the signal sounds Acoustic signal 3. To
ページ10に含まれる内容の要旨
Using the timer Function Pre-requisite Result after time has elapsed Automatic cut-out With heat setting set Acoustic signal 00 flashes Cooking zone switches off Countdown timer Cooking zones are not switched on Acoustic signal 00 flashes 3 While the countdown timer is activated, no cooking zone can be used. 3 The countdown timer basically cannot be used if a cooking zone is switched on. 3 If a cooking zone is switched off, the timer function set is also switched off. Selecting a cooking zon
ページ11に含まれる内容の要旨
Setting the time Step Control panel Indicator 1. Select cooking zone Pilot light for the cooking zone selected flashes 2. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Indicator 1. Select cooking zone Pilot light of cooking zone selected flashes faster Time remaining is displayed 2. Touch The time remaining counts backwards to 00. The pilot light goes out. The
ページ12に含まれる内容の要旨
Safety cut-out Cooking surface If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered for longer than approx. 10 seconds, e.g. by a pan placed upon it, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after ap- prox. 10 second
ページ13に含まれる内容の要旨
Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, in- tensive browning of food, especially in prod- ucts containing starch, may present a health risk due to acrylamide. Therefore we recom- mend cooking at low temperatures and not browning foods too much. Cookware You can recognise good cookware from the bot- toms of the pans. The bottom should be as thick and flat as possible. Cookware made of enamelled steel or with alumin- ium or coppe
ページ14に含まれる内容の要旨
Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking suitable for Cook time Tips/Hints setting process 0Off position Keeping V Keeping cooked foods warm as required Cover food warm Hollandaise sauce, Melting 5-25 mins. Stir occasionally melting butter, chocolate, gelatine 1-2 Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on Simmering rice and milk-based Add at least twice as much 2-3 Simmering dishes 25-50 mins.
ページ15に含まれる内容の要旨
Cleaning and care 1 Take care! Risk of burns from residual heat. Let the appliance cool down. 1 Important Sharp objects and abrasive clean- ing materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1.Wipe the appliance with a damp cloth and a little washing up liquid. 2.Rub the appliance dry using a clean cloth. Remov
ページ16に含まれる内容の要旨
What to do if… Problem Possible cause Remedy The cooking zones will not switch More than 10 seconds have passed Switch the appliance on again. on or are not functioning since the appliance was switched on The child safety device is switched Deactivate the child safety device on l (See the section “Child safety de- vice”) Several sensor fields were touched Only touch one sensor field at the same time The sensor fields are partly covered Remove the cloth or the liquid. by a damp cloth or with li
ページ17に含まれる内容の要旨
If you are unable to remedy the problem by fol- lowing the above suggestions, please contact your local Service Force Centre. 1 Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. 3 If the appliance has been wrongly operated, the visit from the service technician or dealer may not take place free of charge, even during the warranty period. Disposal 2 Packaging material The packaging materi
ページ18に含まれる内容の要旨
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances are to be observed. Drawers may only be installed with a protective board directly under the appliance. The cut surfaces of the work top are to be protected against moist
ページ19に含まれる内容の要旨
Electrical Connection Diagram For UK only: 230V...240V~ 19
ページ20に含まれる内容の要旨
Installation proud of the work surface Clean the worktop in the area of the cut-out sec- tion. Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middle of one side. When you have cut it to length (add a few mm), press the two ends flush up against one another. 20
