ページ1に含まれる内容の要旨
SAVE 15%
Owners Manual
on accessories.
See back for details.
www.irobot.com
ページ2に含まれる内容の要旨
Important Safety Instructions CAUTION: DO NOT EXPOSE THE ELECTR ONICS OF Dirt Dog, ITS BATTERY OR THE CHARGER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CHARGE USING STANDARD U.S. (10V A C) OUTLET ONLY. Always exercise caution when operating your Dirt Dog. To reduce the risk of injury or damage, keep these safety precautions in mind when setting up, using and maintaining your Dirt Dog: GENERAL SAFETY INSTRUCTIONS • Read all safety and o
ページ3に含まれる内容の要旨
Dear iRobot® Dirt Dog Owner, Welcome to the new world of iRobot. As an owner of iRobot’s latest Dirt Dog Robot, you join a growing group of people around the globe who, like you, are discovering a smarter way to clean. Having practical robots that help you in your home is a new reality. We encourage you to share your feedback as we continue to develop new and better robots. Here’s what you can do to participate in our efforts: • Communicate with us if you have questions, comments or requ
ページ4に含まれる内容の要旨
Important Tips Remove and clean Dirt Dog’s brushes after every 3 uses. Dirt Dog contains electronic parts. Do NOT submerge Dirt Dog or spray with water except for the bin. Clean with a dry cloth only. Always consult your floor manufacturer for approved cleaning methods. Use on hard floor surfaces only. Not designed for continuous operation or commercial use. For Best Performance • Dirt Dog is designed to clean the hard floor found in your garage or basement. Not for use on medium
ページ5に含まれる内容の要旨
Table of Contents Anatomy ..................................................................... 6 Cleaning Pattern .......................................................... 7 Cleaning System ......................................................... 8 Cleaning Modes .......................................................... 9 Battery Storage and Charging ....................................... 10 – 11 Virtual Walls® .............................................................. 12 Home Base™ ..
ページ6に含まれる内容の要旨
Anatomy Top View Virtual Wall Sensor Cleaning Handle Button Serial Port Bin Release Battery Charger Socket Bottom View Brush Bearings Cliff Sensor Contact Flexible Openings Points for Brush Home Base Edge-Cleaning Main Side Brush Brush Brush Caster Wheel Caps Battery Brush Guard Brush Guard Release Tabs (yellow) iRobot Dirt Dog Owner’s Manual
ページ7に含まれる内容の要旨
Cleaning Pattern Dirt Dog is a robot that cleans differently than the way most people clean their floors. Dirt Dog uses iRobot’s AWARE™ Robot Intelligence System to determine the best way to pass over and clean every section of the floor. Dirt Dog calculates the optimal cleaning path as it cleans and determines when to use its various cleaning behaviors: Spiraling: Dirt Dog uses Work Bench a spiral motion to clean a concentrated area. Wall Following: Dirt Dog uses this technique to cle
ページ8に含まれる内容の要旨
Cleaning System Dirt Dog features a patented 3-stage cleaning system. Two counter- Oversized Bin. Side br ush cleans 1 3 rotating brushes along edge of walls scoop up dirt, and into corners. hair and debris into the bin. Floor Surfaces Dirt Dog works on hard floor surfaces like wood, low pile carpet, tile, vinyl, and linoleum, and will automatically transition between different floor types. If you use Dirt Dog in a dirty environment, do not use it to clean scratch- prone
ページ9に含まれる内容の要旨
Battery Storage and Charging Dirt Dog is powered by a Nickel Metal Hydride (NiMH) rechargeable battery. Dirt Dog’s battery can last for hundreds of cleaning cycles before a replacement is necessary. Battery Life To extend the battery life, we recommend storing Dirt Dog’s battery in the robot with the power supply plugged in, or with Dirt Dog on the Home Base. If stored correctly, Dirt Dog’s battery will take less than 3 hours to recharge. If Dirt Dog is left off of its charger for exten
ページ10に含まれる内容の要旨
Charging Lights All Dirt Dog models have a charging indicator light. Use this chart to determine the status of the battery: Charging Indicator Light Battery Status Red Battery empty Amber pulse Charging Solid green Fully charged TIP: When Dirt Dog is on the Home Base, always make sure that the Home Base Power and Docked lights are on. 10 iRobot Dirt Dog Owner’s Manual
ページ11に含まれる内容の要旨
® (optional accessory) Virtual Walls The iRobot Dirt Dog Virtual Walls create an invisible barrier that Dirt Dog will not cross. The Virtual Walls can be set to block an area ranging from three to eight feet long. TIP: Use the V irtual Walls to block doorways or to keep Dirt Dog away from cords. Confining Dirt Dog to a single room will accelerate cleaning. The V irtual Wall beam is keyhole shaped. A small halo prevents Dirt Dog from bumping into the Virtual Wall and a larger lobe-shap
ページ12に含まれる内容の要旨
™ (optional accessory) Home Base Dirt Dog returns to the Home Base at the end of a cleaning cycle or when its battery is running low. Dirt Dog needs to find the infrared signal of the Home Base in order to return. Always keep the Home Base plugged in. When Dirt Dog is on the Home Base, the Power and Docked lights will be green to indicate Dirt Dog is charging. Home Base Location You should position the Home Base on a hard level surface and in an area where Dirt Dog has a clear path to r
ページ13に含まれる内容の要旨
(optional accessory) Remote Control Spot Power Clean Directional Buttons Max Pause The Dirt Dog Remote Control lets you conveniently control Dirt Dog’s functions. You can use it to turn Dirt Dog on and off, and steer it around your room without bending down. It also gives you remote access to the following commands: Clean: Start Dirt Dog in Clean mode Dirt Dog calculates room size and adjusts cleaning time. Spot: Start Dirt Dog in Spot mode. Max: Start Dirt Dog in Max mode. Dirt Dog r
ページ14に含まれる内容の要旨
(optional accessory) Scheduler Remote Control Power Spot Clean Scheduling Max Virtual Wall Directional Buttons Front Cover The Scheduler Remote Control is an optional accessory. To schedule Dirt Dog to clean, use the Scheduler Remote Control to program your cleaning times. Then use the Scheduler Remote Control to send your schedule to Dirt Dog and the scheduling Virtual Walls. Install the batteries and set the time before using for the first time. Setting the Time Open the Scheduler
ページ15に含まれる内容の要旨
To schedule iRobot Dirt Dog to clean: 1 Open the Scheduler Remote Control’s front cover to enter Scheduler mode. Press New/Save to begin setting a schedule. 3 Press to select the day of the week. Press to navigate to the hour field. Press to schedule the hour. To select AM or PM, simply scroll past 12:00. Press to navigate to the minute field. Press to schedule the minute. Press to navigate to the Once/Weekly field. Press to choose Once or Weekly. Choose W
ページ16に含まれる内容の要旨
Sending Schedules After setting a cleaning time, you need to send the schedule to Dirt Dog and the scheduling Virtual Walls. To send a schedule to your Dirt Dog: 1 P ower on Dirt Dog with the Power button. Open the Scheduler Remote Control’s front cover, point the remote at Dirt Dog and press Send All. The display will flash to indicate the remote is sending the schedule. Dirt Dog will play a song to indicate the schedule is received and the Status light will begin blinking. Mak
ページ17に含まれる内容の要旨
4-7 0-3 8+ Sending Schedules To send a schedule to the scheduling Virtual Walls: Press and hold the pow er button on each scheduling 1 Virtual Wall until the Scheduled light turns on. Scheduled light Point the Scheduler remote at each scheduling Virtual Wall and press Send All to send the schedule. The display will flash, indicating that the remote is sending the schedule to the Virtual Wall. The Virtual Wall’s Scheduled light will blink to confirm that it is scheduled 3 t
ページ18に含まれる内容の要旨
4-7 0-3 8+ 0-3 4-7 8+ Changing Schedules Open the Scheduler Remote’ s cover. The display should 1 read “SHOW .” If it reads “Set Time”, see p. 15. Scroll through the programmed schedules using or until you find the schedule you want to change. Press New/Save when the remote displays the 3 schedule you wish to change. Scroll to the field you wish to change using the and buttons and use the to change the time, day, or frequency. Press New/Save to save the new time. Se
ページ19に含まれる内容の要旨
Maintenance To keep Dirt Dog running at peak performance, it is recommended that you perform the following maintenance tasks every three uses: 1 Remo ve and empty 3 Clean Dir t Dog’s brushes Dirt Dog’s bin A. Remove brush guard by pulling both yellow tabs Press button and pull to remove bin B. Remove and clean Dirt Dog’s brushes. Remove brush caps and use scissors to cut any hair wrapped around the brush. Use the Dirt Dog Clean Dirt Dog’s cliff detect cleaning tool to comb hair
ページ20に含まれる内容の要旨
Troubleshooting Dirt Dog will tell you when something is wrong with a two-tone “uh-oh” sound followed by beeping. Refer to the chart below to resolve Dirt Dog’s problem. If the problem is not resolved, visit www.irobot.com/support. Number of Likely cause What to do beeps after “uh-oh” No beeps A wheel is stuck or is not Pick up the robot, place it down securely on the floor and touch touching the ground the clean button to restart the cycle. 1 The main brushes cannot Turn over Dirt Dog a
