ページ1に含まれる内容の要旨
USER’S MANUAL
TV RECEIVER
TV RECEIVER
DSA-9310E
CUSTOMER HELPLINE NUMBER 0870 100 2525
CUSTOMER HELPLINE NUMBER 0870 100 2525
ページ2に含まれる内容の要旨
PARTS INCLUDED IN THE BOX Remote control 1UNIT P/C Cable(optional) 1UNIT Audio Cable(optional) 1UNIT AC Cable 1UNIT 2
ページ3に含まれる内容の要旨
TABLE OF CONTENTS PARTS INCLUDED IN THE BOX 2 TABLE OF CONTENTS 3 SAFETY INSTRUCTIONS 5 FRONT & REAR VIEW OF RECEIVER 8 FRONT PANEL 8 REAR PANEL 9 CONNECTION GUIDE 10 CONNECTING WITH MONITOR 10 CONNECTING WITH AN AERIAL 11 CONNECTING WITH ANOTHER SET TOP BOX OR VIDEO EQUIPMENT 12 CONNECTING WITH PC 13 REMOTE CONTROL 14 PROGRAMME BANNNER 16 VOLUME BAR 17 FEATURES OF THE MAIN MENU 18 TO START SET 20 TO MUTE THE SOUND INSTANTLY 21 AUTO TUNING MEMORY OF PROGRAM 22 EDIT OF MEMORISED PROGRAM 26 SKIPPI
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
SAFETY INSTRUCTIONS Remove mains plug from socket when receiver Do not place any liquid container on top of is not in use for a long time or during a RECEIVER. lightening storm. If water spills into RECEIVER, an electric short may occur which can cause a fire. Do not handle the power cord with wet hands. Do not overload wall outlets and extension Do not pull the power cord to remove the plug cords. It may result in power failure. from the socket. It may cause an electric shock or damage. Do not
ページ6に含まれる内容の要旨
Place the RECEIVER on a plain stable surface. Keep the RECEIVER safe from any foreign If not, the RECEIVER may fall off or tip over objects. causing injury or damage. Be sure to disconnect all cables before moving Put the RECEIVER in a place of moderate RECEIVER. temperature 5 - 40 degrees. If not, it may cause damage or shorten the lifetime of the RECEIVER. Do not put the RECEIVER in a place where it is Do not lay heavy objects on the RECEIVER. humid or dusty, or near oil, smoke or steam. It ma
ページ7に含まれる内容の要旨
Do not use water or oil to clean. Do not put RECEIVER under the sunlight or near heating units. It may cause damage or shorten lifetime of the RECEIVER. Do not press two buttons of the remote Keep the RECEIVER away from magnets or controller in at the same time. vibration. Never attempt to disassemble remote It may cause blurred colour of screen and a damage. controller. Ensure the RECEIVER is placed in a position Do not plug in when the shape of socket does not match with the plug. with good ve
ページ8に含まれる内容の要旨
FRONT & REAR VIEW OF RECEIVER FRONT PANEL TV/AV MENU RECALL POWER SOUND 12 3 4 5 6 7 1. POWER BUTTON Use to power unit on & off. 2. LED POWER : Displays RED when the unit is powered off or standby, GREEN when the unit is powered on. SOUND : Displays when the sound is STEREO or DUAL. 3. TV/AV BUTTON Use to select TV/External Input MODE. TV, AV1/2/3/4 is selected in order whenever the button is pushed. 4. MENU BUTTON Use to access MENU option. When The button is pressed once, MENU appears on t
ページ9に含まれる内容の要旨
REAR PANEL 12 3456 7 1. AV1, AV2 INPUT TERMINAL ( SCART TERMINAL ). Use to connect external input such as VTR, Satellite Receiver, DVD, etc. to the RECEIVER. 2. POWER CORD CONNECTOR Use to connect POWER CORD to the RECEIVER. 3. MONITOR / AUDIO OUTPUT TERMINAL Use to connect MONITOR or external speaker to the RECEIVER. 4. PC INPUT / AUDIO INPUT TERMINAL Use to connect PC input to the RECEIVER. PC input is transferred to output terminal when the power of RECEIVER is off. 5. AV3 INPUT TERMINAL (S-V
ページ10に含まれる内容の要旨
CONNECTION GUIDE Connecting with Monitor Connect D-SUB input of MONITOR to the output terminal of D-SUB output of the RECEIVER. Connect input of speaker to audio output terminal of the RECEIVER. RECEIVER MONITOR MONITOR BACK R AUDIO L PC INPUT 10 10
ページ11に含まれる内容の要旨
Connecting with an Aerial Plug the aerial into the coaxial socket. Notice This RECEIVER can receive SECAM/PAL except PAL M/N via antenna. RECEIVER RECEIVER 11 11
ページ12に含まれる内容の要旨
Connecting with another Set Top Box or Video Equipment Connect output of another STB or Video equipment (SCART, A/V, S-video) to input of the RECEIVER using SCART cable, A/V cable, S-video cable. Notice This RECEIVER can receive SECAM/PAL/NTSC via external input. - AV1, AV2 RECEIVER DVD - AV3, AV4 VCR 12
ページ13に含まれる内容の要旨
ABC Connecting with PC Connect PC output (D-SUB & audio output) to input of RECEIVER (D-SUB & audio input). PC input can be outputted only when the power of RECEIVER is OFF. RECEIVER PC PC BACK R R AUDIO L PC OUTPUT 13
ページ14に含まれる内容の要旨
REMOTE CONTROL MUTE BUTTON POWER BUTTON Switches the sound on or off. MULTIMEDIA BUTTON DISPLAY POWER BUTTON SOUND BUTTON TV/AV BUTTON RECALL BUTTON PREV BUTTON PROGRAM DIRECTION BUTTONS BUTTONS MENU BUTTON VOLUME BUTTONS TV/TEXT BUTTON How to install the batteries. Caution . . Push to open the cover of the Remote Do not drop, avoid Control. moisture, heat, and dust. . Set the Batteries in the battery (cell), compartment after checking the polarities(+/-), and then, shut the cover(battery type
ページ15に含まれる内容の要旨
TELETEXT PIP BUTTON BUTTONS 2PICTURES BUTTON NUMBER BUTTONS TV/VIDEO BUTTON POP BUTTON SWAP BUTTON 15
ページ16に含まれる内容の要旨
PROGRAMME BANNER 16
ページ17に含まれる内容の要旨
programme Banner allows you to view the current programme information. If you press the RECALL button in normal TV viewing, the channel banner appears on the screen. Press the RECALL button once again, the programme banner disappears. PR Number & Name Sound System Clock Volume Bar Volume Bar Volume Bar allows you to control the volume V / W. 17
ページ18に含まれる内容の要旨
Features of the Main Menu Pressing the MENU button on the remote controller takes you to the “Main Menu”screen. The “Main Menu” contains four options:PAP, Timer, Install, Language. Also each option has the submenu. The option you want to select is highlighted and its submenu is displayed on the right-hand. PAP : Screen displays and controls PIP, 2PIC, POP. Control sub picture. Timer : Set time. Install : Tuning menu displays and controls Edit, Auto Tuning, Manual Tuning, Fine Tuning. Language :
ページ19に含まれる内容の要旨
ABC Language Selection(OPTIONAL) Press the MENU button to call up the Main menu. 1 Select the Language with ARROW C / B button. 2 Then the languages will be displayed. Press the MENU button to return to Main Menu . 3 19
ページ20に含まれる内容の要旨
TO START SET Notice Buttons on the front of the set have the same functions as those of the REMOTE CONTROL. Press the POWER button. 1 The Monitor will illuminate, and the power indicator lamp will light up green. Press the PR buttons. 2 Press the PR V / W button or number buttons to select the Program you want. Adjust the Volume. 3 When the VOLUME V / W button is pressed, the volume changes. Press the POWER button to turn 4 off the set. When the set is turned off, the power indicator lamp light
