ページ1に含まれる内容の要旨
ST.TM.E10100.1
Issue 1
ENGLISH (UK)
INSTRUCTION MANUAL
TT1260
Standard Definition
Professional Receiver/Decoder
Software Version 2.1 (and later)
TT1260/DIRBAS and Options
Typical TT1260 Satellite Receiver or Decoder
ページ2に含まれる内容の要旨
Preliminary Pages ENGLISH (UK) ITALIANO READ THIS FIRST! LEGGERE QUESTO AVVISO PER PRIMO! If you do not understand the contents of this manual Se non si capisce il contenuto del presente manuale DO NOT OPERATE THIS EQUIPMENT. NON UTILIZZARE L’APPARECCHIATURA. Also, translation into any EC official language of this manual can be made È anche disponibile la versione italiana di questo manuale, ma il costo è a available, at your cost. carico dell’utente. SVENSKA NEDERLANDS LÄS DETTA FÖRST! LEES DIT
ページ3に含まれる内容の要旨
Preliminary Pages List of Contents Chapter 1: Introduction This chapter identifies the equipment versions covered by this manual; describes the purpose of the equipment in a typical system; provides a summary of its main features; identifies the controls, indicators and connectors in a guided tour of the front and rear panels; and lists the available options. Chapter 2: Installing the Equipment This chapter provides a guide to the suitability of an installation; gives detailed procedures for the
ページ4に含まれる内容の要旨
Preliminary Pages Index Forms Service/Repair Order Form Page iv Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1
ページ5に含まれる内容の要旨
Preliminary Pages About this Manual This manual provides instructions and information for the installation and operation of the TT1260 1U digital integrated Receiver/Decoder (IRD). It should be kept in a safe place for reference during the life of the equipment. Further copies of this manual can be ordered from the address shown on page vii. If passing the equipment to a third party, pass on the relevant documentation also. Issues of this Manual Issues of this manual are listed below: Software V
ページ6に含まれる内容の要旨
Preliminary Pages Warnings, Cautions and Notes Heed Warnings All warnings on the product and in the operating instructions should be adhered to. The manufacturer can not be held responsible for injuries or damage where warnings and cautions have been ignored or taken lightly. Read Instructions All the safety and operating instructions should be read before this product is operated. Follow Instructions All operating and use instructions should be followed. Retain Instructions The safety and opera
ページ7に含まれる内容の要旨
Preliminary Pages Contact Information TANDBERG Television Customer Services Support Services Our primary objective is to provide first class customer care that is tailored to your specific business and operational requirements. All levels are supported by one or more service performance reviews to ensure the perfect partnership between TANDBERG Television and your business. Levels of Support We offer a number of support service levels so you can choose the one most appropriate to your business r
ページ8に含まれる内容の要旨
Preliminary Pages Technical Training Training Courses TANDBERG Television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technologies. TANDBERG can provide both regularly scheduled courses and training tailored to individual needs. Courses can be run either at your premises or at one of our dedicated training facilities. Where to Find Us For further information on TANDBERG Television's training programme please contact us: Inter
ページ9に含まれる内容の要旨
Chapter 1 1. Introduction Contents 1.1 Scope of this Manual................................................. 1-3 1.5 TT1260 Control Modes............................................1-14 1.1.1 Who Should Use this Manual ....................... 1-3 1.5.1 Introduction .................................................1-14 1.1.2 What this Manual Describes......................... 1-3 1.5.2 Front Panel (Local) Modes..........................1-15 Identifying the Equipment .............................
ページ10に含まれる内容の要旨
Introduction Table 1.3: Main Features of the Decoder Range........................... 1-5 List of Tables Table 1.4: Main Features of the Satellite Receiver Range ............ 1-5 Table 1.1: Hardware Marketing Codes...........................................1-4 Table 1.2: Software Key Marketing Codes.....................................1-4 Page 1-2 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1
ページ11に含まれる内容の要旨
Introduction 1.1 Scope of this Manual 1.1.1 Who Should Use this Manual This manual is written for operators/users of the TT1260 Professional Receivers and Decoders. It describes the unit’s functions and operation. The manual is written to assist in the installation and day-to-day care and operation of the unit. Maintenance information requiring the covers to be removed is not included. CAUTION... Removing the covers of this equipment may invalidate the warranty. 1.1.2 What this Manual Describes
ページ12に含まれる内容の要旨
Introduction Marketing Codes Table 1.1 gives a description of each hardware Marketing Code and Table 1.2 gives a description of each software key Marketing Code. Table 1.1: Hardware Marketing Codes Option Marketing Codes Engineering Description Number Number TT1260/DIRBAS E10100 TT1260 Base unit with Director Smart Card reader hardware, chassis TT1260/HDC/ALRM S12316 Alarm Relay Card 3 TT1260/HWO/ASI S12495 ASI Input Card, chassis backplate for ASI Input Card 4 TT1260/HWO/QPSK S12496 QPSK Input
ページ13に含まれる内容の要旨
Introduction Table 1.3: Main Features of the Decoder Range Marketing Inputs Input Data-rate Coding Digital Code Outputs TT1260/HWO/ASI 2 x ASI 0.350-160 Mbit/s Table 1.4: Main Features of the Satellite Receiver Range Marketing Inputs Input Frequency Input Symbol rate FEC Rates Digital Code Outputs Satellite TT1260/HWO/HM 2 x 8PSK 950 – 2150 MHz 1 – 44.5 Msymbols/s QPSK: 8PSK TT1260/HWO/8PSK 1/2, 2/3, 3/4, 5/6, 7/8 8PSK: 2/3, 5/6, 8/9 Satellite TT1260/HWO/HM 2 x 950 – 2150 MHz 1 – 44.5 Msymbo
ページ14に含まれる内容の要旨
Introduction 1.2 Summary of Features 1.2.1 Main Features The TT1260 is fully compliant with the appropriate sections of the 1 2 3 MPEG-2 , DVB-S and DSNG specifications and offers the following features: Front Panel Controls and Indications: A vertical split two line x 40 character back-lit dot matrix LCD display with pushbuttons for Up, Down, Left, Right, Edit, and Save to provide information and operator choice entry LEDs to indicate lock and general alarm conditions Service Selection:
ページ15に含まれる内容の要旨
Introduction Conditional Access/Scrambling: Remote Authorisation System (RAS) version I EBU Basic Interoperable Scrambling System (BISS) Mode-E EBU Basic Interoperable Scrambling System (BISS) Mode-1 VideoGuard Director TANDBERG Television Signal Protection TANDBERG Director system: Over-air remote control is available if the TT1260 is used as part of a TANDBERG Director system (Over-air software downloading, Re-start, Tuning and Retuning etc.) NOTES… 1. The TANDBERG Director sys
ページ16に含まれる内容の要旨
Introduction Control Methods: Front Panel User Interface Asynchronous serial remote control Over-air remote control (TANDBERG Director system) (optional) 1.2.2 Inputs ASI Inputs (Decoders) Two BNC connectors support both byte-mode and single packet burst mode. L-Band Inputs Two F-type connectors connect the L-band output of a suitable LNB either directly or via a suitable attenuator giving lightning and surge protection. Remote Control A 9-way D-type, male connector used to connect to a
ページ17に含まれる内容の要旨
Introduction There is a 25-way D-type connector on the optional Alarm Relay Card (TT1260/HDC/ALRM) with six relays for failure monitoring for NCP over-air. The operator can define (using the Alarm Menu pages) which alarm conditions that drive the relays and also the general front-panel ALARM LED. This is described in Chapter 4, Alarms and Annex C, Menus. 1.2.4 Conditional Access and Scrambling The transport stream received by the IRD may be encrypted. The CA system is used to decrypt the require
ページ18に含まれる内容の要旨
Introduction 1.3 The Satellite Receiver 1.3.1 Typical Satellite System The TT1260 Satellite Receiver is a component of the MPEG-2/DVB compliant range of TANDBERG Television equipment. It is designed for use by broadcasters and distributors of video, audio and data services over satellite. evolution 5000 Encoder (1) evolution 5000 1 2 3 evolution 5000 4 5 6 7 8 9 TANDBERG 0 * Multiplexer (Main) Modulator (Main) 1 2 3 4 5 6 ▲ TANDBERG 7 8 9 ◄ ► TAN
ページ19に含まれる内容の要旨
Introduction 1.3.2 Input Connections The Satellite Receiver interfaces directly to Low-Noise Block (LNB) and accepts an intermediate frequency (IF) input in the band 950 - 2150 MHz (L-band) for operation in the specified symbol-rate range (see Annex B, Technical Specification). The unit can provide dc power and polarisation switching to the LNB. 1.3.3 What the Satellite Receiver Does The Receiver can be tuned to a specified satellite channel frequency and polarisation. The input is down-converte
ページ20に含まれる内容の要旨
Introduction 1.3.4 Over-air Software Download (TANDBERG Director Systems) The TT1260 Satellite Receiver is shipped with the appropriate software installed, but it is designed to allow replacement of this code by new versions of software transmitted over-air. The new code is downloaded as a background task in the same transport stream as used for the normal transmission of services. Figure 1.5 shows the system required for this function. The existing software continues to function during the down
