ページ1に含まれる内容の要旨
VQT1L48_ENG.book 1 ページ ２００７年１２月１１日 火曜日 午後４時５５分
Operating Instructions
Digital Video Camera
Model No. NV-GS330
Before use, please read these instructions completely.
GN
VQT1L48
ページ2に含まれる内容の要旨
VQT1L48_ENG.book 2 ページ ２００７年１２月１１日 火曜日 午後４時５５分 ª Carefully read the Operating Information for your safety Instructions and use the Movie Camera correctly. ≥Injury or material damage resulting from any WARNING: kind of use that is not in accordance with the TO REDUCE THE RISK OF FIRE, ELECTRIC operating procedures explained in these SHOCK OR PRODUCT DAMAGE, ≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, Operating Instructions are the sole MOISTURE, DRIPPING OR SPLASHING AND responsibility of
ページ3に含まれる内容の要旨
VQT1L48_ENG.book 3 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Pages for reference -If you see this symbol- Pages for reference are indicated by dashes either side of a number, for example: -00- Information on Disposal in other Countries outside the European Union The menu operation flow is indicated by >> in the This symbol is only valid in description. the European Union. If you wish to discard this product, please contact your IF THE POWER CORD OF THIS EQUIPMENT IS local authorities or dealer DAM
ページ4に含まれる内容の要旨
VQT1L48_ENG.book 4 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before opening the CD-ROM package, please read the following. End User License Agreement (for USB Driver, SweetMovieLife and MotionDV STUDIO) You (“Licensee”) are granted a license for the Software defined in this End User Soft Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Ele
ページ5に含まれる内容の要旨
VQT1L48_ENG.book 5 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Contents Information for your safety ................................... 2 Playback mode Playing back tape............................................... 39 Before using Slow-motion playback/ frame-by-frame playback................................. 40 Accessories.......................................................... 6 Variable-speed search function.......................... 40 Optional...........................................................
ページ6に含まれる内容の要旨
VQT1L48_ENG.book 6 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Before using Parts identification and handling Accessories ª Camera The followings are the accessories supplied with this product. 1) (1) (3) (2) (4) 2) 3) 4) (1) White balance sensor -37- VSB0484 Remote control sensor -23- 5) 6) (2) Grip belt -9- (3) Lens (LEICA DICOMAR) (4) Microphone (built-in, stereo) -29-, -33- 1) AC adaptor, DC input lead, AC mains lead (5)(6) -10- 2) Battery pack -9- 3) Remote control, button-type battery -
ページ7に含まれる内容の要旨
VQT1L48_ENG.book 7 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using (14) (15) (8) (16) (20) (22) (17) (21) (9) (18) (10) (19) (11) (12) (23) (24) (25) (13) (20) LCD monitor -13-, -76- (8) Viewfinder -13-, -76- Due to limitations in LCD production Due to limitations in LCD production technology, there may be some tiny bright or technology, there may be some tiny bright or dark spots on the LCD monitor screen. dark spots on the Viewfinder screen. However, this is not a malfunction and does Howev
ページ8に含まれる内容の要旨
VQT1L48_ENG.book 8 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Fitting the lens cap Fit the lens cap to protect the surface of the lens. ≥The lens cap and the lens cap cord come pre-attached to the grip belt. ≥When not using the lens cap, pull the lens cap cord in the direction of the arrow. 1 ≥When you are not recording, be sure to cover the lens with the lens cap for protection. 2 (32) (32) Tripod receptacle This is a hole for attaching the camera to optional tripod/VW-CT45E. (Please carefu
ページ9に含まれる内容の要旨
VQT1L48_ENG.book 9 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using The grip belt Power supply Adjust the belt length so it fits your hand. ª Charging the battery 1 Adjust the belt length and the pad position. When this product is purchased, the battery is not charged. Charge the battery before using this product. ≥Battery charging time (-11-) 2 ≥We recommend using Panasonic batteries. (-6-) ≥If you use other batteries, we cannot guarantee the quality of this product. ≥If the DC input lead is conn
ページ10に含まれる内容の要旨
VQT1L48_ENG.book 10 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª Connecting to the AC outlet ª Fitting the battery The unit is in the standby condition when the AC Push the battery against the battery holder and adaptor is connected. The primary circuit is slide it until it clicks. always “live” as long as the AC adaptor is connected to an electrical outlet. ª Removing the battery While sliding the [BATTERY] lever, slide the battery to remove it. 1 1 Connect the AC mains lead to the AC adapt
ページ11に含まれる内容の要旨
VQT1L48_ENG.book 11 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ≥The actual time may become shorter than this. Charging time and recordable time The recordable time shown in the table are The times shown in the tables below are for when approximations. The recordable time will the temperature is 25 oC and the humidity is 60%. become shorter in the following cases: If the temperature is higher or lower than 25 oC, ≥When you use both the viewfinder and the the charging time will become longe
ページ12に含まれる内容の要旨
VQT1L48_ENG.book 12 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª How to turn the power on and off with Setting date and time the LCD monitor/viewfinder When the movie camera is turned on for the first When the power switch is set to [ON], the power time, [SET DATE AND TIME] will appear. can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode or Card Recording Mode. 1 Open the LCD monitor out or extend the ≥Select [YES] and press the centre o
ページ13に含まれる内容の要旨
VQT1L48_ENG.book 13 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ≥The brightness and colour level of the LCD ª Recharging the built-in lithium battery ≥If [0] or [--] is appears when the camera is monitor can be adjusted from the menu. ≥If it is forcibly opened or rotated, the camera turned on, then the built-in lithium battery has run down. Use the steps below to charge the may be damaged or fail. ≥If the LCD monitor is rotated by 180o towards battery. When turn on the power for the first tim
ページ14に含まれる内容の要旨
VQT1L48_ENG.book 14 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª To cancel Quick Start Quick Start 1 Set [SETUP] >> [QUICK START] >> [OFF]. When quick start is ON the battery power is still (-19-) being consumed, even when the LCD monitor ≥If the [OFF/ON] switch is set to [OFF] while the and the viewfinder are closed. unit is in quick start standby, the power turns off. The movie camera will resume recording/pause ≥If the standby continues for approx. 30 minutes, mode about 1.7 seconds afte
ページ15に含まれる内容の要旨
VQT1L48_ENG.book 15 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ≥When inserting a previously recorded cassette, Inserting/removing a cassette use the blank search function to find the position 1 Fit the AC adaptor or the battery and turn on where you want to continue recording. If you are the power. overwriting a previously recorded cassette, be 2 Slide the [OPEN/EJECT] lever and open the sure to find the position where you want to cassette cover. continue recording. ≥When closing the cass
ページ16に含まれる内容の要旨
VQT1L48_ENG.book 16 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using ª Card access lamp Inserting/removing a card Before inserting/removing a card, set the [OFF/ON] switch to [OFF]. ≥If the card is inserted or removed with the power turned on, this camera may malfunction or the data recorded on the card may be lost. 1 Turn off the power 1. 1 ≥When the camera accesses the card (reading, recording, playback, erasing, etc.), the access lamp lights up. ≥If the following operations are performed when
ページ17に含まれる内容の要旨
1 3 4 2 VQT1L48_ENG.book 17 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Selecting a mode How to use the joystick Rotate the mode dial to select the desired mode. ª Basic joystick operations 1 Rotate the mode dial. Operations on the menu screen and selection ≥Set your desired mode to 1. of files to be played back on the multi-image display 1 Move the joystick up, down, left, or right to select an item or file, and then push in the centre to set it. : TAPE RECORDING MODE 5 Use this when you rec
ページ18に含まれる内容の要旨
VQT1L48_ENG.book 18 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using 2) Tape recording mode 4) Card recording mode ([AUTO/MANUAL/FOCUS] switch is set to ([AUTO/MANUAL/FOCUS] switch is set to [MANUAL]) [AUTO]) 2 Self-timer recording -34- 3 Backlight compensation -30- 1/2 2 1 Help mode -19- 2 Soft skin mode -31- 1 2/2 1 Tele macro -32- 2 5) Card recording mode ([AUTO/MANUAL/FOCUS] switch is set to [MANUAL]) 2 Iris or gain value -38- 3 White balance -36- 4/4 1 Shutter speed -38- 2
ページ19に含まれる内容の要旨
VQT1L48_ENG.book 19 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using Help mode Switching the language Select an icon for an explanation of the function. You can switch the language on the screen ≥Set to Tape/Card Recording Mode. display or the menu screen. 1 Press the joystick to display the icon during 1 Set [LANGUAGE] >> select the desired the recording pause. Move the joystick language. down until icon 1 appears. 1 2 Move the joystick right to select the Help Using the menu screen mode icon [ ].
ページ20に含まれる内容の要旨
VQT1L48_ENG.book 20 ページ ２００７年１２月１１日 火曜日 午後４時５５分 Before using 5 Move the joystick right or press it to set the ª Operating with remote control selection. The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the [MENU] button. 6 Move the joystick up or down in order to select the item to be set. 2 Select a menu item. ≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit. 7 Press the joystick to determine
