ページ1に含まれる内容の要旨
OPL 9712
Barcode Data Collector
Specifications Manual
ページ2に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual All information subject to change without notice. Document History Model Number: OPL 9712 Specification Number: SS06071 Edition: Original Spec Number: 1 SS06050 Date: 2007-02-05 Copyright 2007 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimer
ページ3に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual Contents 1. Abstract ....................................................................................................................................5 2. Overview...................................................................................................................................5 3. Physical Features ....................................................................................................................6 3.1. Dimen
ページ4に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 14.2. Vibration Strength ..........................................................................................................23 14.3. Dust and Drip Proof........................................................................................................23 15. Reliability................................................................................................................................23 16. Regulatory Compliance ...........
ページ5に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 1. Abstract This manual provides specifications for the OPL 9712 barcode data collector (hereafter referred to as “data collector”). 2. Overview This scanner uses laser technology. To start a scan, press the trigger switch. Do not allow the scanner to directly touch the surface of a barcode when scanning. Operating the scanner via a trigger switch enables low-power operation and longer battery life. Supported symbologies: Linear (1D) 2D J
ページ6に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual Applications can be developed for this product using the Software Development Kit (SDK). Software can be developed in the C programming language. These development tools are available as accessories. Figure 1: Reading a barcode. 3. Physical Features 3.1. Dimensions W 129 mm x D 44 mm x H 22.3 mm 3.2. Weight 105 grams (with lithium-ion batteries installed). 6
ページ7に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: 0 to 40° C Humidity: 20 to 85% 4.2. Storage Temperature and Humidity Temperature: -20 to +60° C Humidity: 20 to 90% 4.3. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light 3,000 lx Fluorescent light 3,000 lx Sunlight 50,000 lx Fig
ページ8に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 5. Electrical Specifications Item Specifications Remarks Main battery 600 mAh lithium-ion battery Main battery life Rechargeable: 300 times Backup battery 3.4 mAh lithium-ion battery Current consumption 1 mA or less At standby 150 mA or less When operating Usable time 24 hours or more 1 scan/5s Without backlight, with Bluetooth communication 50 hours or more 1 scan/5s Without backlight, no communication Data hold time 72 hours or mo
ページ9に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 8. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity Room temperature (5–35° C) and room humidity (45% RH–85% RH) Ambient light 500 to 900 lx Background Barcode = black Space = white Margin = white Background of label = black 8.1. Print Contrast Signal (PCS) 0.45 or higher (over 70% of reflectivity of space and quie
ページ10に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual The scanning range follows a rectilinear path and expands in the shape of an arc while centering (focusing) on a distant virtual reference point. PCS Resolution (mm) Decode Depth (mm) 0.9 1.0 60–300 0.5 35–210 0.25 35–120 0.15 35–70 Resolution Symbology PCS Digit 1.0 mm Code 39 0.9 1 0.5 mm Code 39 0.9 3 0.25 mm Code 39 0.9 8 0.15 mm Code 39 0.9 10 Conditions Scan angle 54° (reading range is 44°) Detect angle 40° Barcode sam
ページ11に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 8.3. Pitch, Skew, and Tilt 8.3.1. Pitch Angle Scanning performance is guaranteed at α±25°. Figure 4: Pitch 11
ページ12に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 8.3.2. Skew Angle and Dead Zone Skew angle: β = ±50° (Excluding dead zone) Dead zone: β = ±8° (There are some areas in which decoding fails due to specular reflection) (Depth of field: Within 90 mm from the minimum scannable distance). Figure 5: Skew and dead zone 12
ページ13に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 8.3.3. Tilt Angle Scanning performance is guaranteed when γ = ±20° Figure 6: Tilt angle Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance: 90 mm from the edge of the data collector Label: Pitch, Skew Angle PCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39, Quiet Zone = 10 mm, N/W Ratio = 1:2.5 Dead Zone, Tilt Angle PCS = 0.9, Resolution = 0.26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mm Angle: Curvature:
ページ14に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 8.4. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≥15 mm. With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≥20 mm. Figure 7: Curvature Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.9, Resolution = 0.26 mm, Quiet Zone = 10 mm Distance: 90 mm from the edge of the data collector Angle: Skew Angle β = +15° The scanning range will vary according to the
ページ15に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 9. Interface Specifications 9.1. Bluetooth Specifications Bluetooth® is a registered trademark owned by its proprietor and used by OPTOELECTRONICS Co., Ltd. under license. Feature Description 1) Version 2.0 1) Supported protocol stack RF (Radio Frequency Protocol) BB (Base Band Protocol) LM (Link Manager Protocol) L2CAP (Logical Link Control and Adaptation Protocol) SDP (Service Discovery Protocol) RFCOMM (serial port emulation) 1) S
ページ16に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 9.2. Frequency Bluetooth devices use the 2.4 GHz frequency band. Scientific, medical, and industrial devices, including microwaves, wireless security (camera) systems and WLAN use the same frequency band as this scanner. Other radio stations also use this frequency for mobile object identification, including local private radio stations that require a license (for example, manufacturing lines at factories), specific power-saving radio statio
ページ17に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 10. Default Settings 10.1. Default Settings 1: Readable Codes Symbology Read Transmit Transmit Calculate Set Set Other Code CD CD Prefix Suffix Length UPC-A X CR — UPC-A Add-on X X CR — UPC-E X CR — UPC-E Add-on X X CR — EAN-13 X CR — EAN-13 Add-on X X CR — EAN-8 X CR — EAN-8 Add-on X X CR — Chinese Post X X X CR — Codabar / NW-7 X X CR Not transmit — ST/SP Code 11 X X X CR — Co
ページ18に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual Symbology Read Transmit Transmit Calculate Set Set Other Code CD CD Prefix Suffix Length RSS-14 X X CR — RSS-limited X X CR — RSS-expanded X X CR — S-Code X X CR — Telepen X X CR — Trioptic X CR Not transmit — — — ST/SP Notes: • In the “Reading” column, “ ” means “Enable reading” and “X” means “Disable reading.” • In the “Transmit code length” column, “ ” means “Transmit code length” and “X” means “Do not tr
ページ19に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 11. Serial Number The serial number shown on the right is written on silver matte with black paper affixed to the backside of the OPL 9712. Figure 8: Serial number diagram 19
ページ20に含まれる内容の要旨
Opticon OPL 9712 Specifications Manual 12. FCC Labels This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure 9: FCC label 20
