ページ1に含まれる内容の要旨
Camera Control Unit
GP-KS162CUD
(Lens, Cable and Camera Head : option)
Before attempting to connect or operate this product, please read these instructions completely
ページ2に含まれる内容の要旨
CONTENTS PREFACE .............................................................................................................................................................................................. 1 FEATURES ............................................................................................................................................................................................ 1 PRECAUTIONS ..............................................................................
ページ3に含まれる内容の要旨
PREFACE FEATURES (With GP-KS162 H) The Panasonic Camera Control Unit GP-KS162CU is 1. 1/2 inch Interline CCD image sensor with 768 (H) x 492 designed to use with the optional Camera Head GP- (V) pixels. KS162H. 2. 480 lines of horizontal resolution. This system overcomes space limitations that have compli- 3. 0.3 footcandle (3 lux) at F1.4 of minimum scene illumi- cated many video applications. Weight of only 0.04 lbs (16 nation. g), this remarkably compact CCTV camera measures only 4. 50 dB of
ページ4に含まれる内容の要旨
PRECAUTIONS • Do not attempt to disassemble the camera. • How to take care of this camera. To prevent electric shock, do not remove screws or After turning OFF the Power ON/OFF Switch, clean it cover. There are no user-serviceable parts inside. with a dry cloth. If it is difficult to remove the dirt or Refer servicing to qualified service personnel. dust, clean it up with a cloth applied the neutral cleanser. Use the lens cleaning tissue paper(may be available at your local camera store) for len
ページ5に含まれる内容の要旨
SYSTEM BLOCK DIAGRAM GP-KS162 Series Standard Configuration Camera Head, Tripod Attachment, Camera Control Unit. Optional Camera Cable GP-CA162/2: 2m GP-CA162/3: 3m WHITE AUTO VIDEO BAL LIGHT LEVEL GP-CA162/38: 3.8m DC POWER CAMERA AWC ON MANU ATW ON OFF OFF GP-CA162/10: 10m MANU AWC SET OFF R B LEVEL GP- KS162 Optional Camera Head Camera Control Unit GP-KS162CU (GP-KS162H) Optional Accessorles Wide Angle Lens Wide Angle Lens GP-LM3TA GP-LM7TA Pinhole Lens Tele Angle Lens GP-LP12TA GP-LM15TA C-M
ページ6に含まれる内容の要旨
8. Video Level Control (LEVEL) Camera Control Unit GP-KS162CU This controls the video level when the Video Level Selection Switch (7) is set to the MANU position. 1. DC Power On/Off Switch (DC POWER, ON/OFF) The video level control depends on the Auto Light On/Off Switch (6) setting as shown below. 2. Auto White Balance Control Button (AWC SET) AUTO LIGHT OFF : The white balance can be set by pressing this button By turning this counterclockwise, the video level is when the White Balance Selecti
ページ7に含まれる内容の要旨
on 14. Electronic Light Control (ELC) On/Off Switch off When shooting the objects under the high light condi- This function is invalided by setting the white balance tion, the lighting can be controlled by the electronic again. shutter mode. In the AWC mode, the Automatic Sensing Zone setting This switch is used to disable the ELC function. is available. Normally turn on this switch. on 20. Aperture Level Selection Switch off on 15. AGC On/Off Switch The aperture level can be selected by this sw
ページ8に含まれる内容の要旨
PREPARATIONS Caution: Keep the Power ON/OFF Switch of the camera in GP-KS162H with GP-AD22TA and optional the OFF position through the installation. C-mount lens 1. Remove the front cap of the camera head and confirm GP-KS162H with GP-LM3TA, GP-LM7TA, that the surface of the optical filter of the camera head GP-LM15TA or GP-LP12TA is clean. 1. Remove the front cap of the camera and confirm that Front Cap the surface of the optical filter of the camera head is clean. Front Cap If the surface of t
ページ9に含まれる内容の要旨
SPECIFICATIONS (with the combination of Optional Camera Head GP-KS162H) Pick-up Device : 1/2-inch Interline transfer CCD image sensor with 768 (H) x 492 (V) pixels Horizontal Resolution : 480 lines Minimum Scene Illumination : 0.3 footcandles (3 lux) (F1.4 with AGC ON more than 30 IRE of Y signal with set up) 0.5 footcandles (5 lux) (F1.6 with AGC ON more than 30 IRE of Y signal with set up) Signal to Noise Ratio : 50 dB (Standard condition, Y signal) Video Output : 1.0 Vp-p/75 ohms, composite v
ページ10に含まれる内容の要旨
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America INDUSTRIAL CAMERA DIVISION Executive Office: One Panasonic Way 4H-2, Secaucus, New Jersey 07094 (201) 392-6674 MATSUSHITA ELECTRIC OF CANADA LIMITED 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, Puerto Rico 00630 (809) 750-4300 N0695-0 YW
