ページ1に含まれる内容の要旨
Manufactured by:
81-IN3047-9922
for
Before attempting to connect or operate this product, please read these instructions completely.
PRODUCT INSTRUCTIONS
MODEL: Miniature Camera
ATTACHING HOUSING (PCF6/PCV6 PENDANT MOUNT)
PCF2, PCV2, PCF6, PCV6,
1. Install 3/4" EMT pipe (not provided) to the desired length.
2. Slide the top dome 10" to 12" onto the pipe, leaving enough
PCF6W, PCV6W
room to work. Run the wiring through the EMT connector
DESCRIPTION: Dome Housing, Color Camera - PCF2, PCV2
ページ2に含まれる内容の要旨
DOME REPLACEMENT 1. Rotate the liner inside the dome, so that when the dome is Camera swivel plate secured to the base, the camera lens is in the center of the viewing slot of the liner. NOTE: It may be helpful to install the dome without the liner the first time. This way you can visually determine which direction the lens is pointing and adjust the liner opening accordingly. 2. Align and insert the three tabs of the dome with the three tab
ページ3に含まれる内容の要旨
PCF2, PCV2 Dimensions PCF6, PCV6 Dimensions 6.0" 6.0" Dia. 5.0" Dia. 5.75" 6.0" 1.0" 5.0" Specification Lens Type 3 - 8mm Fixed Focal Lens Series 4 - 8mm Vari- -Focal Lens Series Model Number PCF1 PCF2 PCF3 PCF4 PCF5 PCF6 PCF6W PCV1 PCV2 PCV3 PCV4 PCV5 PCV6 PCV6W Scanning Area 361 mm (H) x 272 mm (V) (Equivalent to scanning area of 1/4" pick-up tube) Scanning 525 lines / 60 fields / 30 frames Horizontal 15.734 kHz Vertical 59.94 kHz Synchronization Internal Synchronization Video Output 1.0 V (p-
ページ4に含まれる内容の要旨
STANDARD INSTALLATION PROCEDURE, MV6W 2. Once the top dome has been placed on the bracket, feed all wires/cable through the 3/4" conduit connector and camera CONTENTS INCLUDE: housing. (1) Wall mount Bracket 3. Slide the housing onto the bracket, then tighten down the screw (1) Dome base on the 3/4" conduit connector (Figure 3). (1) Dome Note: The connector will need to be tightened completly (1) Dome liner down to secure the housing to bracket. (1) Cam
ページ5に含まれる内容の要旨
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. CAUTION 2. Retain Instructions - The safety and operating instructions RISK OF ELECTRIC SHOCK! should be retained for future reference. ! 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. CAUTION: TO REDUCE THE RISK OF 4. Follow Instructions - All operating and user instructions ELECTRICAL SHOCK,
