ページ18に含まれる内容の要旨
Preset setting menu ● Preset Identification Setting (PRESET ID) PRESET NO. 1* 1. Move the cursor to PRESET ID on the preset setting menu and POSITION SET select ON or OFF by moving the joystick to the right or left. PRESET ID ON ALC/MANUAL ALC The factory default setting is OFF. DWELL TIME 10S ON: Preset ID appears on the monitor screen. SCENE FILE OFF PRESET SPEED ••••••••| OFF: Preset ID does not appear. L H RET DEL 2. Press the CAM (SET) key to display the preset ID setting men
ページ19に含まれる内容の要旨
To Set a Display Position for a Preset ID PRESET NO. 1* 0123456789 (1) Move the cursor to POSI and press the CAM (SET) key. The ABCDEFGHIJKLM NOPQRSTUVWXYZ display position set menu appears. ().,'":;&#!?= (2) Move the ID to the desired position by using the joystick, and +-*/%$ press the MON (ESC) key. The display position is set and the SPACE COPY POSI RET RESET monitor screen returns to the preset ID setting menu. DOOR............ Display position
ページ20に含まれる内容の要旨
Preset setting menu ● Dwell Time (DWELL TIME) PRESET NO. 1* • Move the cursor to DWELL TIME and set a dwell time by moving POSITION SET the joystick to the right or left. The factory default setting is 10S. PRESET ID ON ALC/MANUAL ALC Dwell time changes as follows: DWELL TIME 10S SCENE FILE OFF 2S 3S 5S 10S 30S 1MIN 2MIN 3MIN 4MIN PRESET SPEED ••••••••| L H RET DEL S stands for second(s), and MIN stands for minute(s). Preset setting menu PRESET NO. 1* ● Scene File Setting (SC
ページ1に含まれる内容の要旨
Color CCTV Camera
Operating Instructions
Model No. WV-CW864
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
ページ2に含まれる内容の要旨
ENGLISH VERSION CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............ 3 ■ Auto Mode Selection (AUTO MODE) ........ 23 PREFACE ......................................................... 4 ■ Auto Pan Key Setting (AUTO PAN KEY) ... 25 FEATURES ....................................................... 4 ■ Digital Flip Setting (DIGITAL FLIP) ............ 25 ■ Camera Cleaning ...................................... 5 ■ Local/Remote Setting (LOCAL/REMOTE) 26 ■ Preset Data Uploading or Downloading ... 5 ■ Sp
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves or other apparatus (includ- ing amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polariz
ページ4に含まれる内容の要旨
PREFACE The color camera WV-CW864 is designed for A newly developed 1/4” CCD makes the camera installation in an outdoor video surveillance sys- suitable for use under extremely low illumination tem. conditions as well as in daylight. The camera incorporates the digital signal Setup menus allow the camera to perform sur- processor, pan/tilt mechanism, x22 zoom lens veillance tasks by such means as motion detec- and RS485 communication interface in a com- tion, digital flip, patrol-learn and pri
ページ5に含まれる内容の要旨
■ Camera Cleaning Even if this function is used, noise may be produced on the monitor screen, or the preset position may deviate in the course of prolonged use. In such cases, activate the refresh mode on the special 2 menu. (See page 46.) To use this camera with the WJ-SX550B Matrix Switcher, set the auto cleaning function activated on the Matrix Switcher side, then clean WV-CW864 one time a day. ■ Preset Data Uploading or Downloading To download the preset data from the camera to the controlle
ページ6に含まれる内容の要旨
We recommend that you install the optional 6. Do not use strong or abrasive detergents when cleaning the camera body. sun shield when the camera is exposed to Use a dry cloth to clean the camera when it direct sunshine where the ambient tempera- is dirty. ture exceeds +40 °C (104 °F). When the dirt is hard to remove, use a mild Picture quality and camera performance are detergent and wipe gently. Care should be not guaranteed until the inside temperature taken not to scratch the dome cover when
ページ7に含まれる内容の要旨
CONSTRUCTION q w e r o t y u i !0 !1 q Alarm Input Connector u Attachment Pipe w Alarm Output Connector i Upper Base e Video Output Connector o Fall Prevention Wire r Data Port !0 Enclosure t Power Cord for Heater !1 Dome y Power Connector for Camera 7
ページ8に含まれる内容の要旨
SETUP ■ Setup Menu Setup menus are shown in the diagram below. You can adapt the camera to your requirements by setting up the respective items in these menus. Menus are built in a hierarchical structure, from the Setup menu at the top to Manual Mask Area Selection at the bottom. These menus are described on the following pages for reference prior to setup. Switches, keys and the joystick are used in the setup operations. Setup Menu Camera RS-485 Menu Setup Home Self Auto Auto Pan Digital Local
ページ9に含まれる内容の要旨
The keys (switches) to use for setup are shown in the table below. The joystick on the connected con- troller may also be used for setup. The table also shows the functions versus the operations of the individ- ual controllers. For details, see the manual for the controller to be used. Switches and controls are abbre- viated as SW and CTRL respectively in the table. [WV-CU550B] Function/Controller WV-CU550B WV-CU360 WV-CU161 WV-RM70 Joystick CAM SETUP CAMERA SETUP FOCUS Switch Open CAM SETUP See
ページ10に含まれる内容の要旨
■ Setup Menu Description ● Presetting (1) Position (POSITION SET) Aligns the camera position and focal point by panning, tilting, zooming and focusing. See page 17 for the setting. (2) Preset Identification (PRESET ID) Assigns the name for preset IDs (identification of up to 16 alphanumeric characters) and can be switched on or off on the monitor screen. See page 19 for the setting. (3) Light Control (ALC/MANUAL) Selects the ALC or MANUAL mode for adjusting the lens iris. See page 20 for the set
ページ11に含まれる内容の要旨
● Auto Pan Key (AUTO PAN KEY) This setting assigns the SEQ, SORT, AUTO PAN or PATROL (PLAY) mode to the AUTO key on the con- troller. After this setting, the AUTO key performs as assigned. Note: The AUTO PAN LED on the controller does not light if a mode other than AUTO PAN is assigned. ● Digital Flip (DIGITAL FLIP) In ON position, digital flip widens the range to 0° - 180° by reversing horizontal and vertical scanning when the camera is tilted through the 90° (downright position if the camera i
ページ12に含まれる内容の要旨
(6) Password Lock (PASSWORD LOCK) This setting controls access to the privacy zone to be free or limited. If PASSWORD LOCK is set to ON, ON(DIS) or OFF(DIS) for PRIVACY ZONE appears on the SPECIAL 1 menu. (7) Cleaning (CLEANING) This is used for refreshing the electro-mechanical contacts built into the camera. Use this function for maintenance when the camera has been directed at a specific spot or panned over a specific range for a long time. (8) Electronic Zoom (EL-ZOOM) Up to 10-fold electron
ページ13に含まれる内容の要旨
Note: The result of field setup of the mask area and level adjustment is fed back (effected) to the lens iris control in ALC mode. (3) Shutter Speed (SHUTTER) You can select a shutter speed from among 1/60 (OFF), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4 000, and 1/10 000 seconds. See page 39 for the setting. (4) Gain Control (AGC) You can set the gain of an image to automatic adjustment [AGC ON (LOW, MID, HIGH)] or fixed (AGC OFF). See page 39 for the setting. (5) Electronic Sensitivity Enhancem
ページ14に含まれる内容の要旨
(7) White Balance (WHITE BAL) You can select either of three modes shown below for white balance adjustment: • Auto-Tracing White Balance (ATW1) In this mode, the color temperature is monitored continuously and thereby white balance is set auto- matically. The color temperature range for the proper white balance is approx. 2 600 - 6 000 K. Proper white balance may not be obtained under the following conditions: 1. The color temperature is out of the 2 600 - 6 000 K range. 2. When the scene conta
ページ15に含まれる内容の要旨
SETTING PROCEDURES The following setting procedures are described on the assumption that this model is used in combination with the WJ-SX550B Matrix Switcher and WV-CU550B System Controller. In case a controller other than the WV-CU550B is used, refer to the table on page 10. D4 menu ■ Menu Display ● Setup Menu Display Camera Set Up Menu On Exit F1 F2 F3 F4 WV-CU550B 1. Select the camera number you want to set up and a monitor to Camera Set Up Menu Res A.Res Exit display SET U
ページ16に含まれる内容の要旨
Setup menu ■ Presetting ** SET UP MENU ** PRESET 1 ● Preset Menu Display MAP HOME POSITION OFF 1. Displaying the preset menu directly SELF RETURN OFF AUTO MODE OFF (1) Move the cursor to PRESET 1 O and select the position num- AUTO PAN KEY AUTO PAN DIGITAL FLIP ON ber by moving the joystick to the right or left. LOCAL/REMOTE LOCAL (2) Press the CAM (SET) key. SPECIAL1 CAMERA The preset setting menu appears on the monitor screen. RS485 SET UP Setup menu 2. Displaying the preset menu f
ページ17に含まれる内容の要旨
PRESET NUMBER SET menu 3. Pan Offset (1-32) If the camera is replaced with a new one, the pan offset function ** PRESET NUMBER SET ** is used to adjust its positions to be the same as before except 1 2 3 4 patrol setting. 5 6 7 8 9 10 11 12 The system controller can download or upload the preset position 13 14 15 16 17 18 19 20 data. 21 22 23 24 25 26 27 28 Caution: The preset data for other cameras (WV-CS850A for 29 30 31 32 example) is incompatible with WV-CW864's. WV-CW864's
