ページ1に含まれる内容の要旨
NETWORK CAMERA
User Manual
SNB-3002
ページ2に含まれる内容の要旨
Network Camera User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or chang
ページ3に含まれる内容の要旨
● OVERVIEW overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the saf
ページ4に含まれる内容の要旨
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance with the installation instructions. CAUTIO
ページ5に含まれる内容の要旨
● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair m
ページ6に含まれる内容の要旨
overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near conductive material. Do not attempt to service this apparatus yourself. Do not place a glass of water on the product. Do not install near any magnetic sources. Do not block any ventilation openings. Do not plac
ページ7に含まれる内容の要旨
● OVERVIEW CONTENTS 3 Important Safety Instructions OVERVIEW 9 Product Features 9 Recomended PC Specifications 10 Recomended SD/SDHC Memory 3 Card Specifications 10 What’s Included 11 At a Glance 15 Mounting the Lens INSTALLATION & 16 Inserting/Removing a SD Memory CONNECTION Card 18 Memory Card Information (Not Included) 15 19 Connecting with other Device 22 Connecting the Camera Directly NETWORK CONNECTION to Local Area Networking AND SETUP 23 Connecting the Camera Directly to a DHCP B
ページ8に含まれる内容の要旨
overview 35 Connecting to the Camera WEB VIEWER 36 Login 37 Installing ActiveX 38 Installing Silverlight Runtime 35 40 Using the Live Screen 43 Search and play by event 44 Search and play by time 46 Setup SETUP SCREEN 46 Audio & Video Setup 56 Network Setup 63 Event Setup 46 70 System Setup 75 Specification APPENDIX 79 Product Overview 80 Troubleshooting 82 Open Source Announcement 75 83 License 86 GPL/LGPL Software License 8_ overview
ページ9に含まれる内容の要旨
● OVERVIEW PRODUCT FEATURES • Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • Web Browser-based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm If an event occurs, the event-related video will be transferred to the email specified by the user, or saved to the SD memory. • Video Motion Detection Detects a motion from the video before triggering an event.
ページ10に含まれる内容の要旨
SNB-3002 overview RECOMENDED SD/SDHC MEMORY CARD SPECIFICATIONS • 2GB ~ 32GB • To ensure proper recording of video data, it is recommended you use a memory card that supports at least read/write speed 10Mbps and Class 6. WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Camera 1 User Manual, Installer S/W CD, 2 CMS S/W DVD Quick Guide 1 C Mount Adapter 1 Used to install the camera lens Auto Iris Lens
ページ11に含まれる内容の要旨
● OVERVIEW SNB-3002 AT A GLANCE Front Side Item Description Camera Holder Used when you mount the camera onto the bracket by fixing the camera (Mount) Holes holder (mount) adaptor with the bracket. Used to fix the camera on a bracket or mounting bracket. The screw size : use this screw to fix the mounting bracket. Mounting Bracket b 1/4" - 20UNC (20THREAD/1") Screw Hole L : 4.5mm±0.2mm (ISO Standard), or 0.197" (ASA Standard) FBL Lever Adjust the FBL (Flange-Back Length)
ページ12に含まれる内容の要旨
overview Item Description Auto Iris Lens Installed on the lens adaptor. (Optional) Auto Iris Lens Used to supply power and output signal to control the iris of the lens. Connector Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied M ethanol. Mounting Bracket is not included. For more information to use mounting bracket, refer to the product’s documentation. 12_ overview
ページ13に含まれる内容の要旨
● OVERVIEW Rear Side AUDIO OUT AUDIO IN SD C SD CARD SD CARD ARD SD SYSTEM POWER RESET VIDEO NETWORK 1 2 3 4 5 6 1 : ALARM IN 4 : GND ACT AC 24V LINK 2 : ALARM OUT 5 : RS-485+ DC 12V 3 : ALARM COM 6 : RS-485- GND Item Description SD Memory Card Compartment for the SD memory card. Compartment AUDIO OUT Terminal for audio output. Audio terminal b AUDIO IN Terminal for audio input. ON : A memory card is inserted and operates normally. Flashing : Failed to record, insuffi
ページ14に含まれる内容の要旨
overview Item Description ON : While the power is on System, Power, POWER c SD Indicators OFF : If the power is off Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the system. J If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to change the basic network settings such as IP address, Subnet mask, Gateway, etc., bef
ページ15に含まれる内容の要旨
● INSTALLATION & CONNECTION SNB-3002 SNB-3002 installation & connection MOUNTING THE LENS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. M Mounting the C lens Turn the C mount adaptor clockwise to insert it and do the same with the C lens. C Lens C Mount Adapter Mounting the CS lens Turn the optional CS lens clockwise to insert it. CS Lens English _15
ページ16に含まれる内容の要旨
SNB-3002 1 : ALARM IN 4 : GND 2 : ALARM OUT 5 : RS-485+ 3 : ALARM COM 6 : RS-485- 1 2 3 4 5 6 installation & connection Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object. INSERTING/REMOVING A SD MEMORY CARD Disconnect the power cable from the camera before inserting the SD memory card. J Inserting a SD
ページ17に含まれる内容の要旨
● INSTALLATION & CONNECTION 1 : ALARM IN 4 : GND 2 : ALARM OUT 5 : RS-485+ 3 : ALARM COM 6 : RS-485- 1 2 3 4 5 6 Removing a SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the J slot when released. To remove the SD memory card, set to from and press [Apply ( )]. (page
ページ18に含まれる内容の要旨
installation & connection MEMORY CARD INFORMATION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SD/SDHC memory cards. You may, however, experience compatibility issues depending on the model and make of the memory card. For your camera, we recommend you use a me
ページ19に含まれる内容の要旨
● INSTALLATION & CONNECTION CONNECTING WITH OTHER DEVICE AUDIO OUT AUDIO IN Monitor SD C SD CARD SD CARD ARD SD SYSTEM POWER (for installation) RESET VIDEO NETWORK 1 2 3 4 5 6 1 : ALARM IN 4 : GND ACT LINK AC 24V 2 : ALARM OUT 5 : RS-485+ DC 12V 3 : ALARM COM 6 : RS-485- GND Power Ethernet Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the correspond
ページ20に含まれる内容の要旨
1 : ALARM IN 4 : GND 2 : ALARM OUT 5 : RS-485+ 3 : ALARM COM 6 : RS-485- 1 2 3 4 5 6 installation & connection Connecting to Audio Input/Output Speaker Microphone PC Microphone Network Speaker Amp Amp Microphone 1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. 3. Check the specifications for audio input. • Au
