ページ1に含まれる内容の要旨
PRIMERGY TX100 S1
System configurator and order-information guide
July 2010
Contents
Instructions
Configuration diagram
Configurator
0 System software
I Basic unit
II Processor
III Memory
IV Graphics
V Accessible drives
VI RAID Controller
VII Hard disk drives
VIII Communikation/Network
IX Miscellaneous
X Country specific power cords
Change report
PRIMERGY Server
ページ2に含まれる内容の要旨
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/ System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements. The System configurator is divide
ページ3に含まれる内容の要旨
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Configuration diagram PRIMERGY TX100 S1 FRONT VIEW SIDE VIEW System unit ( I ) Standard DIMM 2 - B Power supply DIMM 1 - B XEON Core2Duo 5.25" x 1.6" CD / DVD drive DIMM 2 - A or Pentium DIMM 1 - A 5.25"x1.6" Memory ( III ) Processor ( II ) Accessible drives (V) Extension slots Hard disks ( VI ) Disk Array ( VIII ) 2 or 4 HDD Bays Communication/Network ( IX ) depending on Base unit. SATA - 3.5"x1" PCIe x
ページ4に含まれる内容の要旨
System configurator and order-information guide Start PRIMERGY TX100 S1 PRIMERGY TX100 S1 Status 2010-06-30 Software Configurator 32 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and VMware-Software is not allowed to be ordered - VCMS VirtualCenter Management Server separately. Exception: VMware SW For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools,
ページ5に含まれる内容の要旨
System configurator and order-information guide Start PRIMERGY TX100 S1 PRIMERGY TX100 S1 Status 2010-06-30 Software Configurator 64 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM-SW is bound to HW and VMware-Software is not allowed to be ordered - VCMS VirtualCenter Management Server separately. For all SW products please refer to the corresponding software configurator accessible via the Extranet under "Configuration & Tools, -All configurations
ページ6に含まれる内容の要旨
System configurator and order-information guide Start PRIMERGY TX100 S1 PRIMERGY TX100 S1 Status 2010-06-30 Section Basic unit I System unit consisting of: * Housing including standard power supply (no redundancy) * Imprint of MAC Adress on system label and delivery note as standard Systemboard with: * 4 PCI expansion slots: 1x PCIe x4 (wired x1), notched (posible to plug x16 cards) 1x PCIe x8; fits for lp and fh formfactor cards 1x PCIe x8 (wired x4) 1x long 32Bit / 33MHz (3.3V); fits
ページ7に含まれる内容の要旨
System configurator and order-information guide A PRIMERGY TX100 S1 Status 2010-06-30 S26361-K1326-V101 S26361-K1326-V121 SATA basic unit Floorstand SATA basic unit Floorstand without CPU and Memory without CPU and Memory - Minimum one CPU / - Minimum one CPU / Memory module has to be Memory module has to be selected via CPU / selected via CPU / Memory order codes Memory order codes for up to 2 LFF (3.5") HDD for up to 4 LFF (3.5") HDD (2 HDD cables included) (4 HDD cables included) S26
ページ8に含まれる内容の要旨
System configurator and order-information guide B PRIMERGY TX100 S1 Status 2010-06-30 Section Processor II One of following CPU´s has to be selected for an orderable basic unit Dual-Core CPU`s - 1x 64-bit Intel Core2 Duo Exx00 (2/3MB SLC) or Xeon UP (4/6MB SLC) a w nitd h h 1e 0a 6t6 p o ipre 1333MHz Frontside Bus occupies socket for one CPU Pentium DC E5200 2.50GHz 2MB 800MHz FSB (65W) S26361-F3582-E520 Pentium DC E5400 2.70GHz 2MB 800MHz FSB (65W) S26361-F3582-E540 Pentium D
ページ9に含まれる内容の要旨
System configurator and order-information guide C PRIMERGY TX100 S1 Status 2010-06-30 Section Accessible drives V There are 2 drive bays (2x 5,25") for accessible drives. While stock lasts a FDD may be used in Projects only. Following USB Components are available 1) USB DVD+-RW: S26391-F7119-L100 Super Multi DVD slim drive (USB cable included) S26391-F264-L226 2) FDD USB (external): external USB FDD (USB cable included) 3) USB Keyboard: S26381-K340-V120 KBPC PX D, professional keyboa
ページ10に含まれる内容の要旨
System configurator and order-information guide D PRIMERGY TX100 S1 Status 2010-06-30 Section RAID-Controller VI Section Hard disk drives VII There is a 6 port SATA controller in the Base Unit. Up to 4 SATA LFF (3.5") hard disks can be configured. S26361-F3219-E160 HD 160GB 7.2krpm 3.5" 7200rpm,<9.0 ms, 8MB Cache SATA 3Gb/s non hot plug max. 4x per system S26361-F3334-E250 S26361-F3334-E500 S26361-F3334-E750 S26361-F3334-E100 HD 250GB 7.2krpm 3.5" HD 500GB 7.2krpm 3.5" HD 750GB 7.2krpm 3
ページ11に含まれる内容の要旨
System configurator and order-information guide E PRIMERGY TX100 S1 Status 2010-06-30 Section Communication / Network VIII S26361-F3241-E1 S26361-F3228-E1 (Glyndon) (Redwater) Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Controller Dual 1000TX Eth Ctrl 1x1Gbit PCIe Pro/1000PT Cu Eth Ctrl 2x1Gbit PCIe PRO/1000PT Cu Intel PRO/1000 PT Server Adaptor Intel Pro/1000PT dual port Server Adapter PCIe x1 PCIe x4 ext: for RJ45-connector, Cat 5 ext: for RJ45-plug, Cat 5 max. 2x per system max.
ページ12に含まれる内容の要旨
System configurator and order-information guide F PRIMERGY TX100 S1 Status 2010-06-30 Section Miscellaneous IX S26361-F2742-E30 Paralell Interface option occupies one card slot max. 1x per system S26361-F2542-E323 Key lock in side door option black max. 1x per system Section Country specific power cords X Power cord for floorstand versions for following countries: 1,8 m, grey T26139-Y1740-E10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR T26139-Y1742-E10 USA, Canada T26139-Y1743-E10 Switzerla
ページ13に含まれる内容の要旨
System configurator and order-information guide PRIMERGY TX100 S1 Status 2010-06-30 Change Report Date Order number Changes 2009-08-17 New Order Codes for CPUs E5200 and E7400 2009-08-17 S26361-F2542-E323 Key Lock Option changed to BLACK => new Order Code 2009-06-30 First Release Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 13
