ページ1に含まれる内容の要旨
Gateway GT115
Service Guide
PART NO.:
PRINTED IN TAIWAN
ページ2に含まれる内容の要旨
Preface 1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Gateway's "global" product offering. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g. add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered in this generic service guide. In such cases, please contact your regional off
ページ3に含まれる内容の要旨
Conventions The following conventions are used in this manual : Denotes actual messages that appear Screen messages on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to avoid possible hardware or software problems. IMPORTANT Reminds you to do specific actions relevant to the accomplishment of procedures
ページ4に含まれる内容の要旨
Safety, Care and Regulatory Information Before installing a server, be sure that you understand the following warnings and cautions. WARNING: To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Unplug the power cord from the power supply to disconnect power to the equipment.
ページ5に含まれる内容の要旨
Table of Contents PREFACE I REVISION HISTORY I COPYRIGHT I DISCLAIMER I CONVENTIONS II SAFETY, CARE AND REGULATORY INFORMATION III PREVENTING ELECTROSTATIC DISCHARGE III SERVER WARNINGS AND CAUTIONS III TABLE OF CONTENTS 1 MECHANICAL COMPONENTS 4 SYSTEM FRU LIST 6 SYSTEM COMPONENTS 9 SYSTEM SPECIFICATIONS 10 Hardware specification 10 Environmental specification 12 Mechanical specification 13 Power supply specification 14 APPEARANCE OF SYSTEM 16 Front view 16 Rear view 17 I
ページ6に含まれる内容の要旨
Front Panel LED Description 19 Hard Disk Drive Sequence & LED Description 19 LAN Port LED Description 19 System Block Diagram 21 MOTHERBOARD PLACEMENT AND JUMPER SETTING 22 Motherboard Component 22 Connector Icon Description 23 Motherboard Jumper Setting 24 INSTALLING/REMOVING SYSTEM HARDWARE 25 Chassis Cover Removal and Installation 26 Removing the side cover 26 CPU Installation / Removal 27 Cooling Fan Installation / Removal 28 Memory Installation / Removal 29 PCI Expansion Card
ページ7に含まれる内容の要旨
Security Menu 49 Setting a System Password 50 Changing a System Password 50 Removing a System Password 50 Server Menu 51 System Information 52 Event Log Configuration 53 Boot Option Menu 54 Boot Manager Menu 56 Exit Menu 57 TROUBLESHOOTING 58 Error Symptoms List 58 BIOS BEEP CODES 61 BIOS Beep Codes Table 61 PEI Beep Codes 61 DXE Beep Codes 61 BIOS Recovery Instruction 61 BIOS POST ERROR MESSAGES LIST 64 BIOS POST error message list 64 PEI Phase 64 DXE Phase 65 UNDETERMINED
ページ8に含まれる内容の要旨
Mechanical Components Item Description 1 Right side cover 2 System support retainer 3 System bottom plate 4 System support retainer 5 System plastic stands 6 Hard drive cage 7 Hard drive bracket 8 Front door plate 9 Front bezel 10 Power button 11 Bezel lens 12 Power lens 4
ページ9に含まれる内容の要旨
13 Optical drive cage 14 USB bracket 15 USB bracket 16 Left side cover 17 Hard drive slider 18 Hard drive cage 19 Top cover 20 System top cover 21 CD-ROM bracket patch 22 PCI retainer 23 Back cover 24 Rear window 5
ページ10に含まれる内容の要旨
System FRU List Item Photo Part number Chassis HS.31600.004 SATA ODD CABLE 7 PINS, CA.R4300.001 500MM SATA HDD CABLE 7 PINS, CA.R4300.002 500MM SAS HDD CABLE CA.31400.030 6
ページ11に含まれる内容の要旨
Back I/O SHIELD 33.R7F0L.001 FRONT BEZEL ASSEMBLY TZ.R4300.001 SYSTEM FAN HI.R4300.001 SYSTEM FAN HI.30900.024 SINK 7
ページ12に含まれる内容の要旨
Main Board MB.R7F0A.001 FSP FSP450-60EP 450W PY.45008.001 POWER SUPPLY Mylar 47.R7F0L.001 8
ページ13に含まれる内容の要旨
System components Item Description 1 Front Bezel door 2 Top cover 3 Power supply cage 4 Cooling fan cage 5 PCI card 6 Main board 7 Hard drive blank 9
ページ14に含まれる内容の要旨
System Specifications Hardware specification System unit Item Description Processor socket AMD socket C32 Memory Technology – Socket C32 interfaces to DDR3 SDRAM DIMMs. Processor support HyperTransport™ Technology. Thermal Monitoring and Control – The Socket C32 processor uses Advanced Platform Management Link. AMD SR5670 – North bridge Core logic chipsets AMD SP5100 – South bridge LAN controller INTEL 82574L Memory controller Integrated in AMD socket C32 proces
ページ15に含まれる内容の要旨
Memory Item Description Number of DIMM slots Four Maximum memory 8 GB (2 GB in each of the four DIMM slots) capacity Memory modes Single DIMM, non-interleaving (DIMM A1) Two DIMMs, interleaving (DIMM A1 and DIMM B1) Four DIMMs, full memory configuration Memory controller Integrated in the AMD socket C32 processor DIMM specifications Size 512 MB, 1 GB, 2GB, and 4 GB Speed 1066/1333 MHz Type DDR3 Unbuffered ECC DIMM Processor General processor specifi
ページ16に含まれる内容の要旨
Environmental specification Item Description Temperature range Operating 5 –35°C (41 –95°F) Non-operating -20 –60C (-4 –140°F) Humidity (non-condensing) Operating 30–80% RH Non-operating 20–90% RH Acoustic noise Full Configuration Sound pressure level in idle mode on bystander position ＜38 dBA Sound pressure level in full loading on bystander position ＜45 dBA Light Configuration Sound pressure level in idel mode on bystander position ＜35 dBA
ページ17に含まれる内容の要旨
Mechanical specification Item Description System board platform uATX (Micro Advanced Technology Extended) System board dimensions Length 304.8mm Width 243.84mm System Dimensions Height 358mm Depth 180mm Width 450mm Server weight (maximum configuration, approximate) Basic configuration (excluding the 8KG keyboard and mouse) Fully loaded configuration 12.2KG (including the keyboard, mouse, and kits) 13
ページ18に含まれる内容の要旨
Power supply specification GT115 supports 300-watts and 450W power supply modules. You have the option to install a 300-watts power supply module or 450W power supply module. Note: If you need to install three hard disk drives, please use 300W power supply (with three connectors). If you need to install four hard disk drives, please use 450W power supply (with four connectors). Item Description Model FSP300-60EP(1) Type 300W Dimensions Height 86 mm (3.38 in.) Depth 14
ページ19に含まれる内容の要旨
Depth 140 mm (5.5 in.) Width 150 mm (5.9 in.) Weight (approximate) 1.43 kg (3.1 lb) Input requirements Rated input voltage 100–127 VAC, 220–240 VAC Normal line voltage 115 VAC, 230 VAC Line frequency 47–63 Hz Rated input current Load 8A at 100–127 VAC, 4A at 220-240 VAC Inrush current No damage Power supply output power Rated steady state power 450W Maximum peak power 450W Operating conditions Temperature 5–50 C (41–122 °F) Humidity (n
ページ20に含まれる内容の要旨
Appearance of System Front view Item Component 1 USB connectors 2 LED indicator panel 16
