ページ1に含まれる内容の要旨
QuickSpecs
HP ProLiant DL180 Generation 6
Overview
Front View: Rear View:
1. Access panel 1. Redundant Power Supply Bay (Optional)
2. Front LED Indicators 2. Power Supply Cable Socket
3. Power on/off 3. Low Profile Card Slot
4. Optional DVD-RW or DVD-ROM drive 4. PCI Expansion Card Slot
5. Front USB Ports (2) 5. PCI Expansion Card Slot
6. Non-Hot Plug Non Redundant fans (4 fans) 6. UID LED Button
7. Air Baffle 7. (Optional) LO100i 10/100 Mbps LAN port for IPMI
management (RJ-45)
8. PCI Cage
9. S
ページ2に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Overview Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slots NOTE: Half DIMM slots are available when one processor is installed. Internal Drive Support: Support for up to twenty-five (25) SFF with a Smart Array controller. Hot Plug Serial ATA (SATA) Models: Up to 12.5 TB (25 x 500GB Hot Plug 2.5"hard drives) Hot Plug Serial Attached SCSI (SAS) Models: Up to 12.5 TB ( 2
ページ3に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Overview support web site Expansion Slots: Up to Four (4) available PCI-Express Slots via the three (3) PCI-E Slot Riser One available Low Profile x16 PCI-Express slot using a Low profile Riser One 3PCI-E x8 Full Height Kit, providing 2x8 full length/full height slots as well as an additional x8(x4 electrically ) slot Two Full Height/ Full Length Riser options: Option 1: 2 PCIe2x8 and 1 PCIex8(4) full-length/full-height slots (Standard) Option 2: 2 PCIe2
ページ4に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Overview Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement i
ページ5に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Six-Core Processors One of the following Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo depending on Model 2/2/2/2/3/3) FIO NOTE: Available through Configure To Order only. See Factory Integration Models section for more details. Intel® Xeon®
ページ6に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage. Upgradeability Upgradeable to two processors Chipset Intel® 5520 Chipset NOTE: For more information regarding Intel chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/. Cache Memory 12 MB Level 3 cache (L5630,E5620,X5650) 4 MB Level 3 cache
ページ7に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Expansion Slots Slot Number Bus Speed Bus Number* Device Hot Plug Notes Number** (Y/N) 1 x16 PCI- 6 0 N Low Profile Express 2 x8 PCI-Express 5 0 N Full Length Full Height 3 x8 PCI-Express 4 0 N Full Length Full Height 4 x4 PCI-Express 3 0 N Full Length Full Height 2 PCI-X*** Dynamic 1 N Full Length Full Height 3 PCI-X*** Dynamic 2 N Full Length Full Height NOTE: All slots can accept universal keyed PCI cards. NOTE: Support is limited to
ページ8に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade (P/N: 516471-B21) is required to enable RAID 6, 6+0 NOTE: To achieve highest possible stated transfer rate please make sure the firmware on the drive bays (backplanes) and HP Smart Array controller up to date. Latest firmware is available to download from HP support web site. Storage Diskette Drives Via USB only Optical Drives Optional HP Sli
ページ9に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features business. Advanced Licenses are required for Virtual KVM and Virtual Media feature activation. Key features of LO100 are: IPMI 2.0 & SMASH CLP support ROM Setup Utility Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD- ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements) Enhanced browser interface and embedded KVM over IP
ページ10に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features While ProLiant 100 series G6 servers do not support the Insight Foundation Suite for ProLiant, they support a key subset of this important suite software tools and utilities which are very suitable for this class of server: SIM, SMH, agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up which greatly simplifies server set- up. Additionally the DL100 and SL100 G6 models support the SmartStart Scripting Toolkit (SSST
ページ11に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features HP Insight Diagnostics AutoRun Array Configuration Utility (ACU) has been combined with Array Diagnostics Utility (ADU) to offer both configuration of array controllers and storage devices and testing of array controller hardware SmartStart Scripting Toolkit (SSSTK) and Smart Components for software and drivers for DL100 and SL100 servers NOTE: OS and SW available for Manual Installation are listed on each servers' QuickSpecs. SmartStar
ページ12に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Security Power-on password Setup password Diskette boot control Secure Sockets Layer (SSL) Secure Shell (SSH) Security - Trusted The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used Platform Module to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature availabl
ページ13に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Common Slot ProLiant It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs. HP offers Power Supply Options: 460Watts, Common Slot, 92% Efficiency 750Watts, Common Slot, 92% Efficiency 460Watts, Common Slot, 94% Efficiency 750Watts, Common Slot, 94% Efficiency HP's ProLiant Common Slot Power supplies (460W & 750W) meet multiple Energy Efficiency Initiatives. Climate Savers Com
ページ14に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Rack Kit HP ProLiant DL180 rack models have fixed rails which provide support for racks with round mounting holes and tool-free support for racks with square mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36". Telco Rack Support Support for all 2 and 4 post Telco racks and threaded hole racks requires an additional option kit from Rack Solutions. The Rack Solutions brackets can be
ページ15に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Standard Features Service and Support HP services provide total care and support expertise with committed response designed to meet your IT and business needs. HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service le
ページ16に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Models Four Drive Serial ATA (SATA) Models NOTE: Upgrading from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives requires the addition of a storage controller and one Internal mini-SAS cable (P/N 496013-B21). NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a HP 2U G6 8HDD LFF DL18X KIT (P/N 506924-B21), storage controller (Smart Array P410/256MB recommended), and two Internal SATA/SAS cables (mini-SAS cable (
ページ17に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Models Eight Drive Serial ATA (SATA) Models NOTE: Supports up to 8 Hot Plug SATA or SAS Hard Drives. HP DL180G6 E5620 Processor Intel® Xeon® Processor E5620 (2.4 GHz, 12MB L3 Cache, 80W, 2x4GB 8LFF DDR3-1066, HT, Turbo 1/1/2/2) 590638-xx1 Cache Memory 8MB shared L3 cache Memory 8GB (2 x 4GB) PC3-10600R-9 (RDIMM) Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapter Storage Controller HP Smart Array P410/256MB BBWC Controller (RAID 0/1/
ページ18に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Models Form Factor Rack (2U) Twelve Drive Serial ATA (SATA) Models NOTE: Internal Storage expandable to 14 SAS/SATA drives with 2 Rear Drive Option Kit (P/N 488234-B21) HP DL180G6 E5620 Processor Intel® Xeon® Processor E5620 (2.4 GHz, 12MB L3 Cache, 80W, 2x4GB 12LFF US DDR3-1066, HT, Turbo 1/1/2/2) 590639-xx1 Cache Memory 12MB shared L3 cache Memory 8GB (2 x 4GB) PC3-10600R-9 (RDIMM) Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapte
ページ19に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Models Internal Storage 24.0TB (12 x 2TB Hot Plug 3.5" SATA hard drives), Maximum 24.0TB (12 x 2TB Hot Plug 3.5" SAS hard drives), Maximum NOTE: Internal Storage expandable to 14 SAS/SATA drives with 2 Rear Drive Option Kit (P/N 488234-B21) Optical Drive None ship standard Power Supply 750W common slot, high efficiency power supply Form Factor Rack (2U) Twenty Five Drive SAS Models HP DL180G6 X5650 Processor (2) Intel® Xeon® Processor X5650 (2.66 GHz, 12
ページ20に含まれる内容の要旨
QuickSpecs HP ProLiant DL180 Generation 6 Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order
