ページ1に含まれる内容の要旨
USER GUIDE
ページ2に含まれる内容の要旨
Thank you for choosing the S100 Active Low Frequency Monitor. To get the most from your new subwoofer, please take a moment to read this manual and familiarize yourself with the product’s features, set-up, and use. Unpacking The shipping container is designed to protect your subwoofer during transit. Please unpack and check your subwoofer carefully, and immediately report any damage to your dealer or to the company that delivered the subwoofer to you. The packing materials are designed to b
ページ3に含まれる内容の要旨
• Muting the S100 output. Plug the included 1/4” footswitch into the On/Mute footswitch jack. Depressing the switch once will mute the output from the S100. Pressing it again will restore output. Note that the mute function applies only to audio generated by the S100. The audio that appears at the Pass-Thru jacks is unaffected by the mute operation. Care and Maintenance Your S100 Active Low Frequency Monitor is simple to care for and maintain. The cabinet is finished with a durable vinyl la
ページ4に含まれる内容の要旨
S100 Active Low Frequency Monitor Specifications Low Frequency Driver 8” polypropylene cone with damped rubber surround and high-temperature voice coil. Frequency Response 35Hz – 120Hz, -3dB Amplifier Power 100W, Linear LFE Crossover 120Hz, 2nd-order Noise >70dB below full output Inputs Mono line input with 1/4” connector; Left and Right line inputs with RCA connectors; All unbalanced. Pass-Through Outputs Two RCA mains monitor channel pass-throughs Controls Input Sensitivity; mains power; ope
ページ5に含まれる内容の要旨
S100 Active Low Frequency User Guide ©2003 Event Electronics, LLC P.O. Box 4189 Santa Barbara, CA 93140-4189 www.event1.com Event Electronics® is a registered trademark of Event Electronics, LLC. S100 is a trademarks of Event Electronics, LLC. All rights reserved. No portion of this manual may be reprinted without written permission of Event Electronics.
