ページ1に含まれる内容の要旨
Owners Manual
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Page Important Safety Instructions 2 HD Safety Instructions For Fixing Your Radius Loudspeakers to a Wall 3 Re-cycling 3 RoHS Declaration of Conformity 3 Background 3 Introduction 4 Setting up and Positioning 5 Positioning - Front Speakers 5 Positioning - Surround Speakers 5 Optimum Speaker Placement 6 Fixing to the Wall 7 Specifications 10 Guarantee and Service 10 Claims under this Guarantee 11 Data Protection 11 EC Dec
ページ4に含まれる内容の要旨
Important Safety Instructions 1. Please read these instructions. 2. Please keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus with water. 6. Clean only with a dry cloth. Great care and attention has gone into the materials chosen to produce the Radius HD Series. A gentle wipe with a dry, clean cloth is all that is required to remove any dust. Treat them as you would a fine piece of furniture because that is how they have been designed. 7. D
ページ5に含まれる内容の要旨
HD Safety Instructions For Fixing Your Radius Loudspeakers to a Wall WARNING: For safety reasons do not attempt to fix these speakers to your wall if you are unsure of your ability to provide a secure and safe fixing. You will need to determine where to fit the bracket and the structure of the wall. If unsure, please obtain the services of a competent qualified trades-person. WARNING: Ensure that there are no water pipes, or electricity cables running behind where the wall bracket is go
ページ6に含まれる内容の要旨
Introduction HD Congratulations and thank you for your purchase of the Radius loudspeakers. We are confident they will provide years of enjoyment and pleasure as only high quality components have been used throughout. HD Building on the overwhelming success of the original Radius Series, Radius brings redesigned cabinet profiles, enhanced cabinet structure, improved aesthetics and improved sonic balance and response. HD The R270 has received major performance enhancements in every area. We
ページ7に含まれる内容の要旨
Setting up and Positioning HD Although position and suitability will have been considered prior to purchasing your Radius , this section will guide you through the optimum positioning and setting up of your loudspeakers. An illustration is provided on page 6 to HD assist you in ensuring your speakers are placed in the optimum positions. For instructions on fitting your Radius speakers to a wall, please go to pages 7,8 & 9. Self adhesive rubber feet are provided to prevent movement due to
ページ8に含まれる内容の要旨
Optimum Speaker Placement Left Right Centre 0° 22° 30° 90° Surround Surround 110° Left Right 135° 150° Rear Rear Surround Surround Left Right Figure 1. HD 6 Radius
ページ9に含まれる内容の要旨
Fixing to the Wall HD The R45 comes with a bracket to mount it on the wall. It is fixed using the 2 button head screws on the back of the cabinet either side of the terminals. WARNING: Ensure that there are no water pipes, or electricity cables running behind where the wall bracket is going to be secured. Work from secure steps and avoid trailing wires. WARNING: Do not connect your speaker cable to the amplifier before connecting it to the speaker. When you unpack the Radius Wall Bracket y
ページ10に含まれる内容の要旨
3. For fixing to a wooden wall/structure, use a 2mm drill bit to drill 2 pilot holes and use 25mm screws to secure the bracket. 4. Fully unscrew the 2 wall bracket mounting screws in the back of the speaker cabinet using the ‘hex’ key provide (Fig. 4). Using the two screws that have just been removed, attach the forked part of the wall bracket to the back of the speaker (Fig. 5). This should be tightened securely. Figure 4. Figure 5. 5. Connect the speaker cables as in Fig. 6. Alternatively
ページ11に含まれる内容の要旨
6. Using the 30mm cap head bolt (provided) secure the two parts together, but leave the bolt loose enough to allow some adjustment if necessary (Fig. 7). Figure 7. 7. Adjust the speaker to the desired listening position and fully tighten the bolt. If you realise this is not the correct positioning, loosen the bolt slightly, re-adjust and then tighten the bolt. Connect your speaker cable to the amplifier. monitoraudio.co.uk 9
ページ12に含まれる内容の要旨
Specifications System Power Recommended Frequency Sensitivity Nominal Power Handling Amp Response (1W@1M) Impedance Handling Single (RMS) Requirements (RMS) 120Hz - 20KHz 87dB 8 Ohms 25W 50W 5-50 W External External Maximum Bass Drive Unit Dimensions. Dimensions. Weight (each) SPL (dBA) Alignment Complement mm inch Kg ( Ib) (H x W x D) (H x W x D) 1x 3” MMP2 cone mid-bass driver. 3 15/16 x Sealed 101 1 x 20mm 100 x 100 x 100 3 15/16 x 0.95 (2 1/8) Cabinet C-CAM gold 3 15/16
ページ13に含まれる内容の要旨
Claims under this Guarantee The equipment should be returned in its original packaging to the original supplier where possible, or to any other authorised Monitor Audio dealer. If it is not possible to return the equipment by hand, then it should be sent carriage prepaid via a reputable carrier. If the original packing is not available replacement packaging can be purchased from Monitor Audio. If you have any difficulties complying with these requirements please contact us at the following a
ページ14に含まれる内容の要旨
EC Declaration of Conformity We, Monitor Audio Ltd. 24 Brook Road Rayleigh Essex SS6 7XL England 08 Declare in own responsibility, that the Radius HD products described in this manual is in compliance with Technical Standards/Council Directives: (LVD) 2006/95/EC Low Voltage Directive EN60065: 2002+A1: 2006 Safety requirements for mains operated electronic and related apparatus for household and similar use. (EMC) 89/336/EEC Electro Magnetic Compatibility EN55013: 08.90+A12:08.94+A13:12.96 Lim
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
Monitor Audio Ltd. Unit 2, 24 Brook Road Rayleigh, Essex SS6 7XL England Tel: 01268 740580 Fax: 01268 740589 Email: info@monitoraudio.co.uk monitoraudio.co.uk Designed in the United Kingdom © 2008. Version 2
