Olympus Motor Drive 2の取扱説明書

ページ1に含まれる内容の要旨

ページ2に含まれる内容の要旨

ページ3に含まれる内容の要旨

Symbols used in this manual Correct Incorrect Operation Operation order Two-step operation Automatic Attention Lamp on operation Order

ページ4に含まれる内容の要旨

PREPARATION As the power unit, the M. 15V Ni-Cd Control Pack 1 is illustrated.

ページ5に含まれる内容の要旨

Inserting the Batteries "36" turns on. LR44/SR44 4

ページ6に含まれる内容の要旨

Connecting the Power Unit Attaching to the Camera 1 . Remove the motor drive socket cap. 5

ページ7に含まれる内容の要旨

2 . Store the removed cap. 3 . Turn the fastening screw clockwise. * The cap of OM-1 or OM-2 cannot be stored. * If there is clearance, shake the motor drive slightly and fit it tightly.

ページ8に含まれる内容の要旨

Detaching the Motor Drive 4. Set the mode selector to SINGLE or SEQUENCE. 1 . Set the mode selector to OFF. 7

ページ9に含まれる内容の要旨

2. 3. * The motor cover should always be attached if you are not shooting with the motor drive.

ページ10に含まれる内容の要旨

Operating the Motor Drive 2 with the OIM-4

ページ11に含まれる内容の要旨

Loading the Film 1. 2. 10

ページ12に含まれる内容の要旨

4 . Press the shutter release. 3. The film will automatically advance two frames without taking pictures. The film advance release wilt automatically stop.

ページ13に含まれる内容の要旨

Rewinding the Film Turn the lever until it stops. 1 . Push R button. When rewinding is completed, the motor will auto- matically stop. 12

ページ14に含まれる内容の要旨

4 . Remove the film. 3. 13

ページ15に含まれる内容の要旨

Operating the Motor Drive 2 with the OM-20 (OM-G) or OM-30 (OM-F) 14

ページ16に含まれる内容の要旨

Loading the Film 15

ページ17に含まれる内容の要旨

3. 4. Press the shutter release. The film wil I automatically advance two frames without taking pictures. The film advance release will automatically stop. 16

ページ18に含まれる内容の要旨

Rewinding the Film 2 . Rewind until the tension is released. 17

ページ19に含まれる内容の要旨

3. 18

ページ20に含まれる内容の要旨

Operating the Motor Drive 2 with the OM-2N (OM-1N) 19