Sony BDV-HZ970Wの取扱説明書

ページ1に含まれる内容の要旨

4-187-308-11(1)
2
Thread the speaker cord ( ) into the bottom of the post (  or ) and
out the opposite end.
(1)
You can choose either the long posts ( ) or the short posts ( ) to assemble the
speakers.

or



Screw holes
Speaker Installation
Guide
3
Thread the speaker cord ( ) through the hole on the bottom of the
speaker ( ) and out the hole on the rear.


4
Insert the post (  or ) into the hole on the bottom of the speaker
(), so that the screw on the top of the post face

ページ2に含まれる内容の要旨

7 1 Connect the speaker cord to the subwoofer. Insert the post (  or ) so that the slot on the lower post aligns with the projection of the base ( ), then secure the post with the Bottom of the subwoofer screws ( ).  Slot  Projection  or  Colored tube  2 Thread the speaker cord through the gap along the side of the subwoofer, and secure it in the speaker cord holder.  Connecting the speaker cord to the center speaker and surround speakers  Required parts    ×3 ×1 ×2 Center spea