DB Drive A6 1200.4の取扱説明書

ページ1に含まれる内容の要旨

A6 800.4, A6 1200.4, A6 1600.4, A6 1600.1D,
A6 1900.1D, A6 2800.1D
Due to continuous improvement of the product the Specifications are subject to change without notice.

ページ2に含まれる内容の要旨

ページ3に含まれる内容の要旨

Low Impedance Stability A6 800.4 - 2 Ohms Stereo (4 Channel) A6 1200.4 - 2 Ohms Stereo (4 Channel) A6 1600.4 - 2 Ohms Stereo (4 Channel) A6 1600.1D - 1 Ohm Mono A6 1900.1D - 1 Ohm Mono A6 2800.1D - 1 Ohm Mono slope crossover network. Channels 1 and 2 are 12db slope for the Highpass setting and channels 3 and 4 feature a selectable 12db slope on the Highpass setting and 12db or 24db slope on the Lowpass / Bandpass setting. Bass Boost For added low frequency performance the amplifiers are equ

ページ4に含まれる内容の要旨

ページ5に含まれる内容の要旨

A6 1600.1D, A6 1900.1D, and A6 2800.1D

ページ6に含まれる内容の要旨

A6 800.4, A6 1200.4, A6 1600.4

ページ7に含まれる内容の要旨

( A6 800.4, A6 1200.4, A6 1600.4 ) ( A6 1600.1D, A6 1900.1D, A6 2800.1D ) The A6 1600.1D, A6 1900.1D and A6 2800.1D are equipped with a variable 24db slope network that allows you to select the crossover mode (Highpass—Full Range) and desired crossover point for channels 1 and 2. Channels 3 and 4 allow you to select between a feature a variable Bass Boost EQ is set at 45Hz. In some subwoofer enclosure installations it Highpass 12db slope, a 12db Stereo Lowpass / Bandpass slope and a mono 24d

ページ8に含まれる内容の要旨

A6 800.4 A6 1200.4 A6 1600.4 Peak @ 14.4V : 2 ohms 4 x 90 W 4 x 110 W 4 x 150 W 4 x 180 W 4 x 225 W 4 x 300 W 4 ohms 4 ohms bridged 2 x 300 W 2 x 500 W 2 x 600 W Rated Power @ 4 Ohm 4 x 75 W 4 x 95 W 4 x 125 W Frequency Resp. 15Hz - 25KHz 15Hz - 25KHz 15Hz - 25KHz S/N Ra o (A-weight) >95dB >95dB >95dB THD with 80k filter <0.5% <0.5% <0.5% Low Input Level 285mV - 6V 285mV - 6V 285mV - 6V Ch 1&2 High Pass Filter 50Hz - 3KHz 50Hz - 3KHz 50Hz - 3KHz Ch 3&4 High Pass Filter 15Hz - 500Hz 15Hz - 500Hz