Earthquake Sound XJ-300Rの取扱説明書

ページ1に含まれる内容の要旨

USER’S MANUAL
Earthquake Sound reserves the right to amend details of the specifications without notice.
© Copyright Earthquake Sound Corporation
Earthquake Sound Corporation
2727 McCone Avenue, Hayward CA, 94545
Phone: (510) 732-1000 U.S. Toll Free: (800) 579-7944 Fax: (510) 732-1095

ページ2に含まれる内容の要旨

TABLE OF CONTENTS CONGRATULATIONS Congratulations and thank you for purchasing the XJ-300R amplifier. The Congratulations...................................... 3 XJ series are stand alone compact amplifiers that allow custom home installation to have a powerful high efficiency amplification while fitting into small places. The XJ-300R comes with a set of standard ears that Features................................................. 4 allows the user to install it in a standard single rack mou

ページ3に含まれる内容の要旨

FEATURES Driving an If the LED light is: In-Wall SUB10? red = amplifier is in auto mode If you are using the XJ-300R to drive a green = amplifier is sensing signal subwoofer (including Earthquake’s THOR amplifier is on In-Wall SUB10), then you will need to set the crossover below 100Hz. If you have a large subwoofer such as a 12”, 15”, or even 18”, then you will have a great response with the crossover set to the 12 o’clock setting or minimum setting. For use with a 8” or

ページ4に含まれる内容の要旨

XJ-300R with MQB-1 XJ-300R with Q10B MQB-1 4-Ohm Parallel Application Q10B 8-Ohm MQB-1 Application 8-Ohm Standard Application 6 7

ページ5に含まれる内容の要旨

XJ-300R with THOR IW-SUB10 THOR 4-Ohm Standard Application Specifications Frequency Response Input Sensitivity For Full Output 28Hz - 175Hz 240mVrms from left input with volume Power Line Voltage control at 0dB, 90mVrms with volume 110-120C ~ AC/60Hz/180W control fully clockwise. PRODUCT SUPPORT (220 option) Input Impedance Please contact Earthquake Sound Technical Support Department for questions regarding any of Dimensions (HxWxD) 8.2 kilo-ohm line-level inputs the products mentioned in t

ページ6に含まれる内容の要旨