ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Specifications TA1100/TA1600 Signal-to-Noise: >102dB below rated output “A” weighted CMRR: >65dB at 1kHz Input Impedance: 47kΩ per phase balanced 47kΩ unbalanced Gain: 29dB maximum Damping Factor: 350 (to 1kHz); 150 (to 10kHz); 18 (to 100kHz) Controls & Switches: Front Panel: Power Switch and Level Controls Indicators: Power Lamp, Clip/Thermal/Protect LEDs 1 Connectors: Input: Balanced: / ” Tip Ring Sleeve 4 Unbalanced RCA 1 Output: / ” Phone, Spring Clip 4 1 Headphone: / ” 4 Power: IEC 320 Dim
ページ3に含まれる内容の要旨
NOTICE - IMPORTANT SAFETY INFORMATION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous volt- CAUTION age" within the product's enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN ! The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (ser
ページ4に含まれる内容の要旨
ADVERTENCIA – INFORMACION DE SEGURIDAD IMPORTANTE El símbolo de flecha relámpago dentro de un triángulo equi- látero, es para alertar al usario de la presencia de “voltajes peli- grosos” no aislados en el interior del aparato, los cuales pueden P E L I G R O ser de suficiente magnitud para constituir un riesgo de choque RIESGO DE DESCARGA eléctrico a las personas. ´ ´ ELECTRICA NO ABRIR. ! El símbolo de exclamación dentro de un triángulo equilátero, es ´ para alertar al usuario de la presencia d
ページ5に含まれる内容の要旨
Table of Contents PERFORMANCE SPECIFICATIONS ..................................................................................................................................................i SAFETY PRECAUTIONS ..................................................................................................................................................................ii INTRODUCTION ..............................................................................................................
ページ6に含まれる内容の要旨
Introduction The Hafler TA1100 and TA1600 are two channel, two rack height, convection-cooled, MOSFET power amplifiers suitable for use in the most demanding applications of critical listening and instrument amplification. These amplifiers offer the same outstanding sonic quality and reliability that has contributed to Hafler’s enviable reputation within professional recording studios and broadcast facilities all over the world. This manual contains information on using the TA1100 and TA1600 amp
ページ7に含まれる内容の要旨
Design Features 1. Input level control 2. Clip/Thermal/ Protect LED 3. Power switch 4. Headphone jack 1 2 4 3 2 1 2 6 1 4 3 5 5 2 1 1. Balanced 1/4” input 2. Unbalanced RCA input 3. IEC line cord connector 4. Line fuse compartment 5. 1/4” mono speaker output 6. Spring clip output 2
ページ8に含まれる内容の要旨
Installation LOCATION The TA1100 and TA1600 power transformer can generate a substantial magnetic field, so caution should be exercised in the placement of low level components such as a tape deck, mixer or mic preamp to avoid inducing noise in the low level circuitry. The amplifiers can also produce considerable heat in normal operation, so the primary consideration when deter- mining a location for the amplifiers is to allow for adequate ventilation. The large heatsinks provide unrestricted ai
ページ9に含まれる内容の要旨
Input 1/4" TRS Balanced Input 1/4" TRS Unbalanced Input Check output of source unit for proper signal polarity 1/4" TRS Balanced Input 1/4" TRS Unbalanced Input Tip Ring Sleeve Tip Sleeve Tip = (+) Tip = (+) Sleeve = GND Ring = (–) Sleeve = GND RCA Unbalanced Input Tip Shell Tip = (+) Shell = GND Operation POWER SWITCH The POWER switch is located on the front panel of the amplifier. An internal lamp indicates when it is turned on. Standard practice is to turn the amplifier on last and off first
ページ10に含まれる内容の要旨
TA 1600 - SHORT CIRCUIT PROTECTION The TA1600 amplifier circuit has no need for sonically degrading voltage and current limiting circuits. To protect the amplifi- er from problems which may occur in the speaker line there is an overload detection circuit. In the event of a short in the speaker load or cables, the speaker detection circuit will shut down that channel and light the red front panel indicator. If this happens, correct the fault and turn the amplifier off, then back on. This will r
ページ11に含まれる内容の要旨
Service Policy & Limited Warranty Please contact Hafler for any Warranty issues. Hafler offers the following limited warranty on Hafler products. • Length of Warranty 1 year on TA1100 and TA1600 90 days on all B-Stock electronics (receipts are required) • What is Covered This warranty applies only to products sold to the original owner (non-transferable). This only applies to units sold in the Continental United States. You are required to have a copy of the receipt stating the customer's name,
ページ12に含まれる内容の要旨
® HAFLER A DIVISION OF ROCKFORD CORPROATION 546 SOUTH ROCKFORD DRIVE TEMPE, ARIZONA 85281 U.S.A. 480-967-3565 / 1-888-HAFLER1 WWW.HAFLER.COM MADE IN TAIWAN M.J.T. 6/00
