ページ1に含まれる内容の要旨
ESA OOGIE
B
M
Owner's Manual
ページ2に含まれる内容の要旨
Hello from the Tone Farm... YOU, the smart player and all around intuitive human, have put your trust in us to be your amplifier company. This is something we do not take lightly. Our reward is that we've made a classic amplifier and by choosing this amplifier, you have become part of the MESA family...Welcome! Our goal is to never let you down. Your reward is that you are now the owner of our most popular selling power amp, the 2:100. Bred of fine all tube amp heritage...benefiting from th
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Precautions OVERVIEW 1/2 FRONT PANEL CONTROLS & SWITCHES LEVEL CONTROLS 2 PRESENCE 2 POWER ON 3 STANDBY 3 MODERN 3 REAR PANEL - SWITCHES & JACKS INPUTS A / B 4 BIAS SWITCH 4 GROUND LIFT 5 SPEAKER JACKS 5 TUBE BAY 6 DRIVER TUBES 12AX7A
ページ4に含まれる内容の要旨
PRECAUTIONS & WARNINGS Your MESA/Boogie Amplifier is a professional instrument. Please treat it with respect and operate it properly. USE COMMON SENSE AND ALWAYS OBSERVE THESE PRECAUTIONS: WARNING: EU: permission from the Supply Authority is needed before connection. WARNING: Vacuum tube amplifiers generate heat. To insure proper ventilation always make certain there is at least four inches (100mm) of space behind the rear of the amplifier cabinet. Keep away from curtains or any flammable
ページ5に含まれる内容の要旨
U F E S Operating Instructions Overview: Congratulations on your choice of the RECTIFIER STEREO 2:100 as your power amplifier and welcome to the MESA/Boogie Family. This 2 rack space unit is born of legendary stock and traces its lineage to the mighty Dual Rectifier Solo Head. Here the stunning performance of the Dual is faithfully recreated in a stereo format that duplicates the power section exactly when the Dual is set to its Silicon Diode rectifier setting. Rectifier tubes were not includ
ページ6に含まれる内容の要旨
Overview: (Continued) Without further delay, connect up your favorite preamp and get ready to experience one of the most commanding sounds in rack-mount history as Recto power goes stereo for the first time in this amazing package. NOTE: BEFORE YOU MOUNT THE 2:100 IN YOUR RACK! This is an extremely aggressive and powerful amplifier intended for use with one of the above mentioned MESA preamplifiers in large venues. If after trying it you feel you may have chosen more amp than you need, you
ページ7に含まれる内容の要旨
FRONT PANEL CONTROLS: (Continued) POWER SWITCH & POWER UP: First remove the protective covers from the tubes (plastic webbing) before con- necting the A.C. cord to a power receptacle. Make all necessary connections including pre-amp, effects, speakers and instrument before E N G I N E E R I N G you flip the STANDBY switch to its ON position. AC power is turned on via the POWER switch and indicated by the pilot lamp. Before switching on the power, place the STANDBY switch into VEL A LEV its
ページ8に含まれる内容の要旨
U F E S REAR PANEL FEATURES: REAR VIEW: 2:100 WARNING: To reduce risk of fire or WARNING: To reduce risk of fire or electric electric shock, replace fuse with shock, Do not remove cover. No user- same type and rating only. Do not serviceable parts inside. Refer expose this unit to rain or moisture. servicing to qualified personnel. E N G I N E E R I N G I I GROUND BIAS N N SWITCH SWITCH NORMAL P NORMAL LIFT P 6L6 POWER FUSE U U 120 V~ 6 A T T 60 Hz SLO S S 6 A BLO EL34 GROUND MUST MATCH TUB
ページ9に含まれる内容の要旨
REAR PANEL (Continued) TUBE BIAS: (Continued) We recommend the 6L6 for reliability: In our many tests and continued use of the currently available EL34 type power tubes on the market today, we regret to say that they do not appear to be as rugged in construction as the available 6L6. This is another reason why your 2:100 was shipped with 6L6 power tubes. If you plan to use the EL34’s we suggest that you keep a full set of tubes and extra fuses with you during all performances in the event
ページ10に含まれる内容の要旨
U F E S M MESA ESA 112AX7 2AX7 REAR PANEL (Continued) SPEAKER OUTPUTS: (Continued) NOTE: If you opt to use only one channel of the 2:100 with speakers connected to that channel’s output only, you must turn the unused channel’s level control to zero! Otherwise the channel will be operating without a load, and damage to the tubes and/or the transformer will result. TUBE BAY: The power tubes used in the 2:100 are MESA/Boogie STR-430 type 6L6 GC’s. These tubes have been tested in the ampli
ページ11に含まれる内容の要旨
U U F F E E S S REAR PANEL (Continued) DRIVER TUBES: 3 x 12AX7A to grab hold of the particular pre-amp tube when replacement is required. Do not allow your fingers, hands or rings/jewelry to come into contact with any other part (s) of the amplifier’s internal circuitry. No other user serviceable parts exist in side. Refer service to qualified personnel. Always unplug AC power before removing the top cover of the amplifier. AC RECEPTACLE: The total power consumption for the 2:100 is 6Amps
ページ12に含まれる内容の要旨
You may occasionally experience some form of tube noise or microphonics. Certainly no TUBE NOISE & MICROPHONICS cause for alarm, this quirky behavior comes with the territory and the Tone. Much like changing a light bulb, you don’t need a technician to cure these types of minor user serviceable annoyances and in fact, you’ll be amazed at how easy it is to cure tube problems...by simply swapping out a pre-amp or power tube! First may we suggest that you set the amplifier up on something so th
ページ13に含まれる内容の要旨
DIAGNOSING PRE-AMP TUBE PROBLEMS: Because your amplifier is an all tube design, it is quite possible that you will at some point experience minor pre-amp tube noise. Rest assured - this is no cause for alarm and you can take care of the problem yourself in a matter of minutes by simply swapping tubes. Let us begin by saying; It is a “very good” idea to keep at least a couple of spare pre-amp tubes on hand at all times to insure uninterrupted performance. These minor pre-amp tube problems ca
ページ14に含まれる内容の要旨
BIAS ADJUSTMENT: part of a continuing series BEAM- CONFINING An Article written by Randall Smith ELECTRODE ( ) CATHODE ( ) , GRID ( ) . ... ... . .. SCREEN . . .. . GRID .. ( ) . .. PLATE . . ...... Here’s a question we often hear: .. ... ( , ) .... . .. . . .. “Why doesn’t MESA put bias adjustments in their amplifiers?” Structure of a 6L6 / 5881 Beam Power Pentode. Well, there’s a short answer and a long answer to this question. The short answer is that during my 12 ye
ページ15に含まれる内容の要旨
BIAS ADJUSTMENT: (Continued) Voltage and current are NOT the same. Current is the AMOUNT of electricity, the “quantity” — and is measured in amperes. Voltage is the degree of electric charge — like the “pressure” to use the old water analogy. Let me illustrate how different voltage and current are: When you scrape your feet across a carpetted floor in dry, wintery conditions, your body can become charged with 50,000 to 100,000 volts of static electricity. And when you reach for the door k
ページ16に含まれる内容の要旨
BIAS ADJUSTMENT: (Continued) Again, this has some merit .. but it’s still not as good as using tubes that are matched in the first place because compensating for the mis-match causes the push-pull circuit itself to become unbalanced. Two wrongs don’t really make a right. Some of the other recommended biasing, “methods” — such as -”.. tubes running red hot, increase the bias .. sounds harsh and runs too cool, turn it down ...” are guesswork at best. Luckily, one of the great things about tub
ページ17に含まれる内容の要旨
W W O O D D A A H H SPEAKER IMPEDANCE MATCHING & HOOK-UP GUIDE: IMPEDANCE: Wiring up speakers to provide the most effective load and making sure that all of them are in phase will help in creating the best sound possible. This is not too difficult, as long as you understand a few things about loading and how to connect your speakers to provide an optimal resistive load. MESA/Boogie amplifiers can handle 4 and 8 ohms effectively. Never run below 4 Ohms in a tube amplifier unless you are absolu
ページ18に含まれる内容の要旨
W W W W W W O O O O O O D D D D D D A A A A A A H H H H H H SPEAKER IMPEDANCE MATCHING & HOOK-UP GUIDE: (Continued) PARALLEL: When wiring in parallel, the resistance of the speakers decreases. Two 8 Ohm speakers wired in ( hooked-up ) Parallel results in a 4 Ohm load. It’s easy to calculate the effect of a resistive load when all the speakers are all the same resistance. It is really not suggested to wire different resistive load values in Parallel ( 8 and 4, 16 and 8 etc. ) The formula for f
ページ19に含まれる内容の要旨
1 WIRING SCHEMES...Amplifier to Speaker Cabinets 2 Partial back view of amplifier Partial back view of amplifier 8 OHM 4 OHM 4 OHM 8 OHM 4 OHM 4 OHM 8 Ohm Cabinet 3 Partial back view of some Mesa amp 8 OHM 4 OHM 4 OHM 4 Ohm Cabinet 8 Ohm Cabinet 4 Ohm Cabinet 4 5 Partial back view of amplifier Partial back view of amplifier 4 OHM 8 OHM 16 OHM 4 OHM 8 OHM 16 OHM 8 Ohm Cabinet SAFE MISMATCH 16 Ohm Cabinet 16 Ohm Cabinet SAFE MISMATCH PAGE15
ページ20に含まれる内容の要旨
WIRING SCHEMES...Amplifier to Speaker Cabinets 6 7 Partial back view of amplifier Partial back view of amplifier 8 OHM 4 OHM 4 OHM 4 OHM 4 OHM 8 OHM 8 Ohm Cabinet 8 Ohm Cabinet 8 Ohm Cabinet 16 Ohm Cabinet SAFE MISMATCH CORRECT MATCH 8 9 Partial back view of amplifier Partial back view of amplifier 4 OHM 4 OHM 8 OHM 4 OHM 4 OHM 8 OHM 8 Ohm 8 Ohm SERIES BOX PARALLEL BOX 4 Ohm 16 Ohm 4 Ohm CORRECT 16 Ohm CORRECT MATCH MATCH 4 Ohm Cabinet 4 Ohm Cabinet 16 Ohm Cabinet 16 Ohm Cabine
