ページ1に含まれる内容の要旨
cover(A) 2007.6.15 9:57 AM 페이지 1
ページ2に含まれる内容の要旨
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should connection to grounding electrodes, and requirements for the be read before the product is operated. grounding electrode. See Figure 1. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions sho
ページ3に含まれる内容の要旨
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO This symbol is intended to alert the user to the presence of CAUTION NOT REMOVE COVER (OR BACK). NO USER- important operating and maintenance (servicing) instructions SERVICEABLE PARTS INSIDE.
ページ4に含まれる内容の要旨
CONTENTS SAFETY INSTRUCTIONS | 2 Introduction • READ THIS BEFORE OPERATING YOUR UNIT | 3 System Connections | 5 Front Panel Controls | 11 Remote Controls | 13 • REMOTE CONTROL OPERATION RANGE | 14 • LOADING BATTERIES | 14 Operations • LISTENING TO A PROGRAM SOURCE | 15 • SURROUND SOUND | 18 • ENJOYING SURROUND SOUND | 20 • LISTENING TO RADIO BROADCASTS | 26 • LISTENING TO XM SATELLITE RADIO (XM Satellite Radio (only for North America)) | 28 • REC
ページ5に含まれる内容の要旨
System Connections • Do not plug the AC input cord into the wall AC outlet until all connections are completed. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver. 1. CONNECTING ANTENNAS • Change the position of the FM indoor antenna until you • A 75Ω outdoor FM antenna may be used to further get the best reception of your favorite FM stations. improve
ページ6に含まれる内容の要旨
2. CONNECTING VIDEO COMPONENTS • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2 can also be connected to an additional video component such as a cable TV tuner, an LD player or satellite system. HDMI(High Definition Multimedia Interface) connection : (*) • You can connect the source component (DVD player, etc.) to the display co
ページ7に含まれる内容の要旨
Continued • There are three types of video jacks(COMPONENT, S-VIDEO, (composite) VIDEO) for connecting video components. Connect them to the corresponding video jacks according to their capability. • For your reference, the excellence in picture quality is as follows : "COMPONENT” > "S-VIDEO” > "(composite) VIDEO”. • When making COMPONENT VIDEO connections, connect "Y" to "Y", "P B/CB" to "CB" (or "B-Y", "PB") and "PR/CR" to "CR" (or "R-Y", "PR" ). • When recording video program sources throu
ページ8に含まれる内容の要旨
4. CONNECTING EXTERNAL INS • Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs • In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit. (For details, refer to the operating instructions of the component to be connected.) 5. CONNECTING DIGITAL INS AND OUT • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are c
ページ9に含まれる内容の要旨
6. CONNECTING SUBWOOFER PRE OUT • To emphasize the deep bass sounds, connect a powered subwoofer. Note : • When the power amplifier is assigned to "SB+W" (Surround Back+Subwoofer), no signals are output from the SUBWOOFER PRE OUT jack. (For details, refer to "When selecting the AMP ASSIGN" on page 37.) 7. CONNECTING XM (only for North America) • Connect the XM terminal to the XM Mini-Tuner system (sold XM Mini-Tuner system separately). • Position the XM Mini-Tuner system near a south-facin
ページ10に含まれる内容の要旨
9. SWITCHED AC OUTLETS • These outlets are switched on(power-on mode) and off(standby mode) according to power control as follows(Maximum total capacity is 120 W (1 A)). Standby mode - Switched AC outlet off Power-on mode - Switched AC outlet on 10. AC INPUT CORD • Plug this cord into a wall AC outlet. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : F
ページ11に含まれる内容の要旨
Front Panel Controls 1. POWER switch 16. CONTROL UP/DOWN( / ) buttons 2. POWER ON/STANDBY button/indicator 17. MEMORY/ENTER button 3. VIDEO INPUT SELECTOR button 18. TUNING UP/DOWN(+/-) buttons 4. AUDIO INPUT SELECTOR button 19. PRESET UP/DOWN(+/-) buttons 5. EXTERNAL IN button 20. MULTI CONTROL knob 6. BAND button 21. REMOTE SENSOR 7. MASTER VOLUME CONTROL knob 22. FLUORESCENT DISPLAY 8. HEADPHONE jack For details, see below. 9. SPEAKER button/indicator 23. SETUP MIC jack 10. SURROU
ページ12に含まれる内容の要旨
SETUP MIC JACK • To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When selecting the AUTO SETUP" on page 41.) Notes: • Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone. AUX IN JACK • The AUX IN jack can be connected to an additional audio component such as
ページ13に含まれる内容の要旨
Remote Controls 13 ENGLISH
ページ14に含まれる内容の要旨
REMOTE CONTROL OPERATION RANGE • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERIES 1. Remove the cover. 2. Load two batteries("AAA" size, 1.5V) matching the polarity. • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries(Ni-Cd type). 14 ENGLISH
ページ15に含まれる内容の要旨
Operations Notes: • Before operating this receiver, first set this unit as desired for optimum performance, doing the system setup procedures. (For details, refer to “System Setup” on page 34) LISTENING TO A PROGRAM SOURCE Before operation 3. Select the desired input source. • Enter the standby mode. • The POWER ON/STANDBY button lights up . This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness. • To swi
ページ16に含まれる内容の要旨
When CD, AUX, VIDEO 1~2 is selected as an 7. To mute the sound. input source 4. Select the digital or analog input connected as desired. • "MUTE" will flicker. • To resume the previous sound level, press it again. • Each time this button is pressed, the corresponding input is selected as follows: A(nalog) o(ptical) 1 o(ptical) 2 c(oaxial) 2 c(oaxial) 1 Notes : 8. To listen with the headphones. • When TUNER, TAPE, EXTERNAL IN or VIDEO 3 is selected as an input source, the analog input is
ページ17に含まれる内容の要旨
Adjusting the tone (bass and treble) 9. Enter the tone mode. • The tone mode is displayed for several seconds. Note : When the digital signals from DTS, Dolby Digital program sources are input or the EXTERNAL IN is selected can listen to a program source without the tone effect. When the “TONE” is set to ON to adjust the 10. Press the CURSOR LEFT( )/RIGHT( ) buttons to tone (bass and treble). select the desired tone mode. 11. Press the CURSOR UP( )/DOWN( ) buttons to select the desired to
ページ18に含まれる内容の要旨
SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. Surround modes • DTS Neo : 6 Cinema DTS Digital Surround This mode is optimum for playing movies. Decoding is DTS Digital Surround(also called simply DTS) is a multi- performed with emphasis on separation performance to channel digital signal format which can handle higher data achieve the same atmosphere with
ページ19に含まれる内容の要旨
Dolby Pro Logic IIx surround Dolby Pro Logic Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1 Dolby Pro Logic is a specially encoded two channel surround channel sources and extends to 7.1channel surround playback. format which consists of four channels (front left, center, front It delivers the most natural, full range and immersing 7.1 right and surround). Sources bearing the channel listening experience. Dolby Pro Logic IIx surround " " provide th
ページ20に含まれる内容の要旨
ENJOYING SURROUND SOUND Notes: • Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. (For details, refer to "SETTING THE SPEAKER SETUP" on page 41.) • When the EXTERNAL IN is selected as an input source, the surround modes cannot be selected. Depending on how to select a surround mode, select the auto surround mode or the manual surround mode. • Each time this button is pressed, the mode changes as follows : Auto surround mode :
