ページ1に含まれる内容の要旨
3-046-018-11 (1)
CD Radio
Cassette-Corder
Operating Instructions
CFD-ZW755
ª 2000 by Sony Corporation
ページ2に含まれる内容の要旨
Information Warning For customers in the United States To prevent fire or shock hazard, do This equipment has been tested and found to not expose the player to rain or comply with the limits for a Class B digital moisture. device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan
ページ3に含まれる内容の要旨
Basic Operations Table of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player Setting Up 12 Using the display 26 Hooking up the system 13 Locating a specific track 14 Playing tracks repeatedly Additional Information (Repeat Play) 29 Precautions 15 Playing tracks in random order 31 Troubleshooting (Shuffle Play) 33 Maintenance 16 Creating your own program 34 Specifications (Program Play) 18 Enjoying sound effects (LOOP/ 35 Index
ページ4に含まれる内容の要旨
Basic Operations Playing a CD 1,2 3 For hookup instructions, see pages 26 – 28. 1 Push 6 PUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. With the label side up 2 Close the lid of the CD compartment. 3 Press ^. Display The player turns on (direct power-on) and plays all the tracks once. Track number Playing time 4 Basic Operations
ページ5に含まれる内容の要旨
Basic Operations Use these buttons for additional operations POWER ^ 6 PUSH OPEN/CLOSE p VOLUME PRESET TIME SET Tip To Do this Next time you want to adjust the volume Turn VOLUME (Press listen to a CD, just press ^. The player turns on VOL +, – on the remote). automatically and starts stop playback Press p. playing the CD. pause playback Press ^ ( P on the remote). Press the button again to resume play after pause. go to the next track Turn PRESET•TIME SET clockwise (Press + on the remote). go b
ページ6に含まれる内容の要旨
Listening to the radio 1 2 For hookup instructions, see pages 26 – 28. Display 1 Press RADIO BAND until the band you want appears in the display (direct power-on). Each time you press the button, the indication changes as follows: "FM1" n "FM2" n "AM". 2 Hold down TUNE + or – until the frequency digits begin to change in the display. The player automatically scans the radio frequencies and stops Indicates an FM stereo when it finds a clear station. broadcast If you cannot tune in to a station, p
ページ7に含まれる内容の要旨
Basic Operations Use these buttons for additional operations POWER MODE VOLUME Tips To Do this • The "FM1" and "FM2" adjust the volume Turn VOLUME (Press bands have the same functions. You can store VOL +, – on the remote). the stations you want turn on/off the radio Press POWER. separately in "FM1" and "FM2". • If the FM broadcast is To improve broadcast reception noisy, press MODE until Reorient the antenna for FM. Reorient the player itself “Mono” appears in the display and radio will for AM.
ページ8に含まれる内容の要旨
Playing a tape 2 12 1 For hookup instructions, see pages 26 – 28. 1 Press p6 to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. With the side you want to play facing you Display 2 Press (. The player turns on ( direct power-on) and starts playing. 8 Basic Operations
ページ9に含まれる内容の要旨
Basic Operations Use these buttons for additional operations POWER 0, ) p6 P VOLUME 0, ) p6 P Note To Do this During playback, do not adjust the volume Turn VOLUME (Press press buttons on the other deck. Otherwise VOL +, – on the remote). the playback speed may stop playback Press p6. change. fast-forward or rewind the tape Press ) or 0. Tip pause playback Press P. Next time you want to Press the button again to listen to a tape, just resume play after pause. press (. The player turns on automat
ページ10に含まれる内容の要旨
Recording on a tape 2 31 For hookup instructions, see pages 26 – 28. 1 Press p6 to open the tape compartment on deck B and insert a blank tape. Use TYPE I (normal) tape only. With the side you want to record on facing you 2 Select the program source you want to record. Display To record from the CD player: insert a CD (see page 4) and press CD. To record from the radio: tune in the station you want (see page 6). To record from the tape (dubbing): insert a recorded tape into deck A and press TAP
ページ11に含まれる内容の要旨
Basic Operations Deck B 3 Start recording. To record from the CD player and the radio, press r on deck B (( is depressed automatically). Deck A To record from the tape, press r on deck B ((is depressed automatically). Then press ( on deck A. Tips Use these buttons for additional operations • Adjusting the volume or the audio emphasis (see POWER MODE page 25) will not affect the recording level. • For the best results, use the AC power as a power source. • If the AM program makes a whistling soun
ページ12に含まれる内容の要旨
The CD Player Using the display DSPL ENT MEM You can check information about the CD using the display. Checking the total track numbers and playing time Press DSPL ENT MEM in stop mode. Total playing time Total track number Checking the remaining time Press DSPL ENT MEM while playing a CD. To display Press DSPL ENT MEM the current track number once and the remaining time on the current track* the number of tracks left twice and the remaining time on the CD the current track number three times an
ページ13に含まれる内容の要旨
The CD Player Locating a specific track You can quickly locate any track using the number buttons on the remote. You can also find a specific point in a Number track while playing a CD. buttons = , + To locate Press Note a specific track directly number button of the track. You cannot locate a a point while listening to + (forward) or =(backward) specific track if “SHUF” the sound while playing and hold down or “PGM” is lit in the until you find the point. display. Turn off the (on the player,
ページ14に含まれる内容の要旨
Playing tracks repeatedly (Repeat Play) PRESET CD ^ TIME SET You can play tracks repeatedly in normal, shuffle or program play modes (see pages 15 and 16). MODE 1 Press CD. “Cd” appears in the display. On the remote 2 Proceed as follows. 1 Press p. 2 Press MODE until To repeat Do this the repeat mode you a single track 1 Press MODE until “REP 1” want appears in the display. appears. 3 Do either of the 2 Turn PRESET•TIME SET following to start to select the track that you repeat play: want to rep
ページ15に含まれる内容の要旨
The CD Player Playing tracks in random order (Shuffle Play) CD ^ You can play tracks in random order. MODE 1 Press CD. “Cd” appears in the display. On the remote 2 Press MODE until “SHUF” appears in the display. 1 Press p. 2 Press MODE until 3 Press ^ to start shuffle play. “SHUF” appears in the display. 3 Press (. To cancel Shuffle Play Press MODE until “SHUF” disappears from the display. The CD Player 15
ページ16に含まれる内容の要旨
Creating your own program (Program Play) CD DSPL ENT MEM ^ You can make a program of up to 20 tracks in the order you want them to be played. MODE PRESET TIME SET On the remote 1 Press CD. 1 Press p. “Cd” appears in the display. 2 Press MODE until “PGM” appears in 2 Press MODE until “PGM” appears in the display. the display. 3 Turn PRESET•TIME SET then press DSPL ENT 3 Press the number buttons for the tracks MEM for the tracks you want to program in the you want to program order you want. in the
ページ17に含まれる内容の要旨
The CD Player Tips To cancel Program Play • You can play the same Press MODE until “PGM” disappears from the program again, since the display. program is saved until you open the disc compartment. To check the order of tracks before play • You can record your own Press DSPL ENT MEM. program. After you’ve created the program, Every time you press the button, the track number insert a blank tape into appears in the programed order. deck B and press r on deck B to start recording. To change the cur
ページ18に含まれる内容の要旨
Enjoying sound effects (LOOP/FLASH) You can repeat part of a CD (LOOP) and can “flash” the CD sound (FLASH) during playback. LOOP FLASH 1 Play a CD. 2 Press and hold LOOP or FLASH at the point you want to start the function. To Press and hold repeat a selected part of a CD LOOP on the remote “flash” the CD sound FLASH on the remote To cancel the LOOP or FLASH function Release the button. The player returns to normal play. 18 The CD Player
ページ19に含まれる内容の要旨
The Radio The Radio Presetting radio stations RADIO BAND DSPL ENT MEM You can store radio stations into the player’s memory. You can preset up to 30 radio stations, 10 for each band in any TUNE –, + order. PRESET TIME SET On the remote 1 Press RADIO BAND until the band you want 1 Press BAND to select appears in the display. the band. 2 Set the frequency to the station you want. 2 Set the frequency to the station you want. 3 Press and hold DSPL ENT MEM for 2 seconds. 3 Press and hold the number
ページ20に含まれる内容の要旨
Playing preset radio stations PRESET TIME SET RADIO BAND Once you have preset the stations, use PRESET +/– on the player or the number buttons on the remote to tune in to your favorite stations. On the remote 1 Press RADIO BAND to select the band. 1 Press BAND to select 2 Turn PRESET•TIME SET to tune in the stored the band. station. 2 Press the number buttons to tune in the stored station. 20 The Radio
