Auralex Acoustics Elite Pro System EPS-112Tの取扱説明書

ページ1に含まれる内容の要旨

™
Elite Pro Systems
EPS-112T
Installation Guidelines
™ ®
Congratulations on purchasing an EPS-112T System from Auralex Acoustics. You’re
now on your way to creating a world class listening environment.
Elite Pro Systems offer a sophisticated look by utilizing products covered with specialized
™
acoustical fabrics. The EPS-112T system contains both B22 ProPanels and CT45 Bass
™
Traps , which when used together, provide incredibly effective broadband absorption in
any room. Use the EPS-112T a

ページ2に含まれる内容の要旨

Elite Pro System EPS-112T General Information Recommended Additional Installation Materials • Power Drill • Tape measure • Carpenters Level • Small ladder (depending on ceiling height) • Pencil • 16 2.5” 4D finish nails • Straight Edge • 160 .75”-1” drywall screws • Nail Set • Hammer B22 ProPanel Installation Guide Mark intended location of each B22 Install four impaling clips within marked B22 ➊ ➋ ProPanel on the wall or ceiling. ProPanel location using drywall screws. Exact placement of each

ページ3に含まれる内容の要旨

CT45 Bass Trap Installation Guide Mark a vertical line 16.75” from the intended Hold CT45 Bass Trap in corner with edges ➊ ➋ placement corner on both sides. aligned to the marked vertical lines. 16.75” While continuing to hold panel in place, install Using a nail set or another finish nail, carefully ➌ ➍ one finish nail though the fabric face and the countersink installed nail so its head goes hardened edge of the CT45. Do not hammer through the fabric surface of the CT45 but not nail compl

ページ4に含まれる内容の要旨

Elite Pro System Installations ® See the Auralex Acoustics website, www.auralex.com, for more information ® about these and other Total Sound Control products. These are general recommendations. Should you have any additional questions about the installation of your ® Elite Pro System, feel free to contact an Auralex Application Specialist via email at appsupport@auralex.com or call 1-800-95-WEDGE.