Goldstar M6003Rの取扱説明書

デバイスGoldstar M6003Rの取扱説明書

デバイス: Goldstar M6003R
カテゴリ: エアコン
メーカー: Goldstar
サイズ: 1.43 MB
追加した日付: 7/1/2013
ページ数: 32
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスGoldstar M6003Rの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Goldstar M6003Rに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Goldstar M6003Rをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Goldstar M6003Rのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Goldstar M6003Rの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Goldstar M6003R 取扱説明書 - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Goldstar M6003Rを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Goldstar M6003Rの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Dry Fan
Cool
website: http://www.lgservice.com
e-mail: http://www.lgeservice.com/techsup.html
ROOM AIR CONDITIONER
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE UNIT,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
MODEL : M5403R, M5203R, M5203L, M6003R, WM-6011,
LWJ0611PCG, LWC061JGMK1

ページ2に含まれる内容の要旨

CONTENTS 2.4 REFRIGERANT CYCLE ........................................... 10 1. PREFACE ................................................................ 2 2.4.1 CONDENSER .................................................. 10 1.1 FEATURES.................................................................. 2 2.4.2 EVAPORATOR ................................................. 10 1.2 SPECIFICATIONS ...................................................... 3 2.4.3 CAPILLARY TUBE ........................

ページ3に含まれる内容の要旨

1.2 SPECIFICATIONS M6003R LWJ0611PCG MODELS M5403R M5203R M5203L WM-6011 LWC061JGMK1 ITEMS COOLING CAPACITY (BTU/h) 5,300 5,200 5,200 6,000 6,000 POWER SUPPLY (Phase, V, Hz) 1ø, 115V, 60HZ INPUT (W) 530 470 610 620 OPERATING CURRENT (AMP.) 4.8 4.3 5.6 5.8 REFRIGERANT CONTROL CAPILLARY TUBE REFRIGERANT CHARGE (R-22) 230g (8.1 Oz ) 330g(11.6 Oz) 335g (11.8 Oz) 235g (8.3 Oz) INSIDE FAN TURBO OUTSIDE FAN PROPELLER FAN WITH SLINGER RING AIR DISCHARGE 2-WAY (RIGHT AND LEFT) CHASSIS TOP-DOWN • OVE

ページ4に含まれる内容の要旨

1.5 LOCATIONS OF CONTROLS 1.5.1 CONTROLS TEMPERATURE SETTING • This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F(16°C) to 86°F(30°C) by 1°F(1°C). Select the lower number for lower temperature of the room. ENERGY SAVER The fan stops when the compressor stops cooling. • Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed. FAN/COOL/DRY • Everytime you push this button

ページ5に含まれる内容の要旨

1.5.2 REMOTE CONTROLLER POWER • To turn the Set ON, push the button. To turn the Set OFF, push the button again. • This button takes priority over any other buttons. • When you first turn it on, the Set is on the High cool mode and the temp. at 72°F(22°C). TEMPERATURE SETTING • This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F(16°C) to Power 86°F(30°C) by 1°F(1°C). Select the lower number for lower temperature of the room. FAN

ページ6に含まれる内容の要旨

2. DISASSEMBLY INSTRUCTIONS 2.1 MECHANICAL PARTS 2.1.1 FRONT GRILLE Figure 1 1. Disconnect the unit from source of power. 2. Using a screwdriver, remove the screw that secures the front grille to control board. (See Figure 1) 3. Push the front grille up from the bottom. Pull the top of the front grille away from the cabinet as the top tabs lift out of their slots. (See Figure 2) 4. Replace the grille by placing the tabs in the slots and push the grille until it snaps into place. Figure 2 2.

ページ7に含まれる内容の要旨

Figure 6 2.2 AIR HANDLING PARTS 2.2.1 AIR GUIDE UPPER 1. Disconnect the unit from the power source. 2. Remove the front grille. (Refer to Section 2.1.1) 3. Remove the cabinet. (Refer to Section 2.1.2) 4. Remove the control board. (Refer to Section 2.1.3) 5. Remove 2 screws that secure the air guide upper to air guide lower. (See Figure 6) 6. Lift air guide upper upward. 7. Re-install by referring to the procedures above. Figure 7 2.2.2 ORIFICE, TURBO FAN AND FAN 1. Disconnect the unit fro

ページ8に含まれる内容の要旨

2.2.3 MOTOR Figure 10 1. Disconnect the unit from the power source. 2. Remove the front grille. (Refer to Section 2.1.1) 3. Remove the cabinet. (Refer to Section 2.1.2) 4. Remove the control board. (Refer to Section 2.1.3) 5. Remove the air guide upper. (Refer to Section 2.2.1) 6. Remove the compressor, turbo fan, fan and shroud. (Refer to Section 2.2.2) 7. Remove 2 screws that secure the motor to the motor. (See Figure 10) 8. Remove the motor. 9. Re-install by referring to the procedures ab

ページ9に含まれる内容の要旨

2.3.2 COMPRESSOR Figure 14 1. Remove the front grille and cabinet. (Refer to Section 2.1.2) 2. Discharge the refrigerant by using a refrigerant recovery system. 3. Remove the overload protector. (Refer to Section 2.3.1) 4. After discharging the unit completely, unbrace the suction and discharge pipes at the compressor connections. 5. Remove 3 nuts which fasten the compressor. 6. Remove the compressor. 7. Re-install by referring to the removal procedure above. (See Figure 14) 2.3.3 CAPACITOR 1

ページ10に含まれる内容の要旨

Figure 18 2.3.6 POWER CORD 1. Disconnect the unit from source of power. 2. Remove the front grille. (Refer to Section 2.1.1) 3. Remove the cabinet. (Refer to Section 2.1.2) 4. Remove 2 screws that secure control board to base pan and orifice. 5. Pulls the control board toward you. 6. Remove the grounding screw. 7. Remove a screw securing the clip with cord to the control board. 8. Pull the power cord. 9. Re-install by referring to procedures above. 2.4 REFRIGERANT CYCLE Figure19 2.4.1 CONDENSER

ページ11に含まれる内容の要旨

6-4. Remove the hose from the vacuum pump and 2.4.3 CAPILLARY TUBE place it on the charging cylinder. See figure 1. Remove the cabinet. 23B. Open valve C. 2. Discharge the refrigerant by using a refrigerant Discharge the line at the manifold connection. recovery system. 6-5. The system is now ready for final charging. 3. Remove the air guide upper. (Refer to Section 7. Recharge as follows: 2.2.1) 7-1. Rotary compressor systems are charged from 4. After discharging the refrigerant completely,

ページ12に含まれる内容の要旨

Equipment needed: Vacuum pump, charging cylinder, manifold gauge, brazing equipment, pinch-off tool capable of making a vapor proof seal, leak detector, tubing cutter, hand tools to remove components and service valve. COMPOUND GAUGE MANIFOLD GAUGE B A CONDENSER SEE INSETS (HIGH PRESSURE SIDE) BELOW COMPRESSOR EVAPORATOR (LOW PRESSURE SIDE) CAPILLARY TUBE LO HI CHARGING CYLINDER A A B B EXTERNAL VACUUM PUMP C Figure 20A-Pulling Vacuum Figure 20B-Charging —12—

ページ13に含まれる内容の要旨

3. INSTALLATION This air conditioner is designed with a button-down chassis so it can be easily installed in a window. 3.1 SELECT THE BEST LOCATION 1. To prevent vibration and noise, make sure the unit is installed securely and firmly. 2. Install the unit where the sun does not shine directly INSIDE OUTSIDE on the unit. FENCE AWNING 3. The outside of the cabinet must extend outward for at least 10" and there should be no obstacles, such as a COOLED AIR fence or wall, within 20" from the back

ページ14に含まれる内容の要旨

CENTER LINE ROOM SIDE Installation HARDWARE TYPE A: 11EA TYPE B: 4EA TYPE C: 3EA DRAIN PIPE (SHORT SCREW) (WOOD SCREW) (L BACKET) TYPE D: 1EA TYPE E: 1EA TYPE F: 2EA (SEAL STRIP) (SASH SEAL) (GUIDE PANEL) (Adhesive backed) (Not adhesive backed) 3.2.2 BEFORE INSTALLATION 1. Insert the guide panels into the guides of the air condi- tioner. Fasten the curtains to the unit with screws (TYPE TYPE A A) as shown Figure. 24. 2. Cut the adhesive-backed seal strip (TYPE D) to the window width. Remove the

ページ15に含まれる内容の要旨

3. INSTALL THE AIR CONDITIONER IN THE WINDOW INNER SILL a. Carefully lift the air conditioner and slide it into the TYPE A OUTER SILL INSIDE open window. Make sure the bottom guide of the air CENTER LINE conditioner drops into the notches of the L bracket. See Figure. 27. 8" SHORT SIDE 8" OUTSIDE Figure 27 L BRACKET IMPORTANT : When the air conditioner drops into the L bracket, the air conditioner will be centered in window opening as shown in Figure. 28. b. While steadying the air conditioner,

ページ16に含まれる内容の要旨

REMOVAL FROM WINDOW Turn the air conditioner off, disconnect the power cord, remove the L bracket and the screws installed through the top and bot- tom of the guide panels, and save for reinstallation later. Close the guide panels. Keeping a firm grip on the air conditioner, raise the sash, and carefully tilt the air conditioner backward, draining any condensate water. Lift the air conditioner from the window and remove the sash seal from between the windows. 3.3 ELECTRICAL DATA Line Cord Plug U

ページ17に含まれる内容の要旨

4.2 PIPING SYSTEM CONDENSER COILS FAN MOTOR CAPILLARY TUBE TURBO FAN EVAPORATOR COILS Following is a brief description of the important components and their function in what is called the refrigeration system. Reference should be made to Figure 32 to follow the refrigerating cycle and the flow of the refrigerant in the cooling cycle. ROOM AIR CONDITIONER CYCLE OF REFRIGERATION EVAPORATOR COILS CONDENSER COILS VAPOR INLET SUCTION LINE HOT COMPLETE LIQUID COOL LOW PRESSURE VAPOR DISCHARGED BOIL

ページ18に含まれる内容の要旨

4.3 TROUBLESHOOTING GUIDE In general, possible trouble is classified in two kinds. The one is called Starting Failure which is caused by an electrical defect. The other is Ineffective Air Con- ditioning caused by a defect in the refrigeration circuit and improper application. Unit is running but cooling is ineffective. Ineffective Cooling Check cold air Check outdoor coil Check heat load circulation for smooth (heat exchanger) and increase. flow. fan operation. Clean condenser. Dirty i

ページ19に含まれる内容の要旨

Fails to Start Check of circuit breaker Check of power source. and fuse. Check of control panel Check control panel. setting. Compressor fails only to Fan only fails to start. start. Improper wiring. Improper thermistor Drop of power voltage. setting Defect of fan motor capacitor. Defect of compressor Loose terminal capacitor. connection Irregular motor resistance (Ω ) Capacitor check. Improper wiring Irregular motor insulation (Ω ) Replacement. Replacement of fan motor. I

ページ20に含まれる内容の要旨

ELECTRIC PARTS TROUBLESHOOTING GUIDE: • The unit does not operate. Possible Trouble 1 NO • Check the Fuse. Is the Trans output power • Check the wiring diagram. AC 115V? YES NO NO • Check the Main Is the Trans output power Is shorted the Trans. output? P.W.B pattern. about AC 14V? YES YES • Exchange the Trans. • Exchange D02D~D05D. NO Is output Voltage of IC01D • Exchange IC01D. DC 12V? YES NO • Exchange IC02D. Is output Voltage of IC02D DC 5V? YES NO Is the reset circuit all right? • Exchan


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Goldstar LS242CE 取扱説明書 エアコン 275
2 Goldstar LT1230CR 取扱説明書 エアコン 96
3 Goldstar M5403R 取扱説明書 エアコン 32
4 Goldstar M5203L 取扱説明書 エアコン 17
5 Goldstar M5203R 取扱説明書 エアコン 25
6 Goldstar WG5005R 取扱説明書 エアコン 72
7 Goldstar WM-6011 取扱説明書 エアコン 15
8 Goldstar LWC061JGMK1 取扱説明書 エアコン 13
9 Goldstar LWJ0611PCG 取扱説明書 エアコン 30
10 Sony SU-PW2 取扱説明書 エアコン 12
11 Sony CV-P12PX 取扱説明書 エアコン 3
12 Sony MULTI CHANNEL AV RECEIVER STR-DG710 取扱説明書 エアコン 31
13 Sony VGN-BX500 取扱説明書 エアコン 1
14 Philips 190S5 取扱説明書 エアコン 21
15 Philips Comfort-Cire AMC 45 取扱説明書 エアコン 7