ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE The exclamation point within an The lightning flash with arrowhead symbol, within an equilateral tri- RISK OF ELECTRIC SHOCK, equilateral triangle is intended to angle, is
ページ3に含まれる内容の要旨
PRECAUTION Follow the advice below for safe and appropriate operation. ON PLACEMENT ON CONDENSATION Do not use the unit in places which are extremely When left in a heated room where it is warm hot, cold, dusty, or humid. and damp, water droplets or condensation Place the unit on a flat and even surface. may form inside the CD player. Do not restrict the air flow through the ventilation When there is condensation inside the unit, slots by placing the unit on soft furnishings, by the
ページ4に含まれる内容の要旨
SYSTEM CONNECTIONS IMPORTANT Switch off the power before connecting speakers and other equipment. SPEAKER TERMINALS IMPEDANCE: 8 ohm (Ω ) SPEAKER CORD CONNECTION Connect the wires with the printed red lines to the red (+) terminals and the plain-black wires to the black (-) terminals. NOTE : Connecting speakers other than the speakers supplied with the unit, may damage the unit. POWER CORD CONNECTION 1. Make sure that all the components and speakers are connected correctly. 2. Check that the r
ページ5に含まれる内容の要旨
PARTS IDENTIFICATIONS 1) CD door 15) FUNCTION button 2) STEREO WIDE indicator 16) DISC SKIP button 3) POWER button 17) SLEEP button 4) OPEN / CLOSE button 18) SKIP/PRESET/MIN/HOUR buttons 5) REMOTE SENSOR 19) PLAY / PAUSE button 20 STOP button 6) PHONES jack 7) CD STORAGE door 21) TIMER button 8) DISPLAY window 22) MEMORY/ CLOCK button 9) VOLUME control buttons 23) FM MODE selector 10) X-BASS button 11) STEREO WIDE button 12) REPEAT button 13) RANDOM / TUNING buttons 14) BAND
ページ6に含まれる内容の要旨
DISPLAY 1. TRACK and CHANNEL indicators. 11. MEMORY indicator. 2. FUNCTION indicators. 12. RANDOM indicator. 3. SLEEP indicator. 13. Indicators to show which disc holder of the disc 4. TIMER ON/OFF indicators. tray is occupied. If a certain disc holder is empty, 5. AM/PM indicators. the corresponding number indicator will be off. 6. X-Bass indicator. 14. REPEAT mode indicators. 7. Band AM/FM indicators. 15. CLOCK/CD TIMING/BROADCAST STATION 8. Playback Indicator. display. 9.
ページ7に含まれる内容の要旨
ADJUSTING THE SOUND TO ADJUST THE VOLUME TO USE THE X-BASS Press the X-BASS button to adjust the bass. Press the VOLUME / buttons to adjust the sound. To increase the volume press here. The display will show: To decrease TRACK the volume press here. X-BASS is designed specifically to boost the low frequency sound to obtain a more powerful bass. STEREO WIDE creates the feeling that the sound is being spread to the left and right, beyond the actual position of the speakers. When listening to the
ページ8に含まれる内容の要旨
SETTING THE CLOCK To set the current time (Select POWER STANDBY mode) 1.Press the MEMORY/ CLOCK 2. Press the HOUR button ( or ) repeatedly to set button in clock mode. Hours flash. current hour and press the PLAY/PAUSE repeat- edly to set the format of time (12 hour/24 hour). 3. Press the MEMORY/ CLOCK button 4. Press the MINUTE buttons ( or ) to set the to make the correct minutes flash. minutes and press MEMORY/ CLOCK button again to start the clock. AND To set the timer on (time to turn o
ページ9に含まれる内容の要旨
SETTING THE SLEEP TIMER 1. Press the SLEEP button while the power is 2. Press and hold the SLEEP button to select the length of remaining time until the unit turns off. on. "SLEEP 90" lights in the display. It changes the indicator in the following way: SLEEP 90 SLEEP 80 SLEEP 10 ........SLEEP 20 SLEEP The Sleep Timer is set and the SLEEP indicator lights in the display. Let go when required sleep time (in minutes) is shown. To cancel the sleep timer, press the SLEEP button once and "SLE
ページ10に含まれる内容の要旨
PRESET TUNING 1. Press the FUNCTION button 2. Press the BAND button to 3. Tune into a station. to TUNER. select a band . 5. Use the UP/DOWN buttons 4.Press the MEMORY/ 6.Press the MEMORY/ CLOCK button. to select the pre-set number. CLOCK button to store the station to the pre-set number. TUNING INTO A PRESET STATION 1. Press the FUNCTION button 2. Press the BAND button to 3. Press the PRESET buttons to TUNER. select the a band. to preset number. The contents (preset channel number, frequency a
ページ11に含まれる内容の要旨
COMPACT DISC PLAYBACK 1. Press the FUNCTION button to CD. 2.Press the OPEN/CLOSE button to open the disc tray. TRACK 3. Place the first disc onto the disc holder, with 4. Press the DISC SKIP button to revolve the tray clockwise. the label side up. WARNING: Place other disc(s) on the disc holder(s). • Before transporting the unit, take out all discs from CD tray. 5. Press the OPEN/CLOSE button to close the tray. It takes a short while for your player to check the discs. TRACK 6. Press the DISC SK
ページ12に含まれる内容の要旨
COMPACT DISC PLAYBACK (CONTINUED) Notes:1. During playback, disc tray can be opened to change/add disc and the current disc playback will not be interrupted but DISC SKIP button will become invalid. 2. The / SKIP buttons can only be used to choose a track of the current disc. To choose a track of another disc, DISC SKIP button should be pressed to get to the desired disc first. 3. Before transporting the unit, take out all discs from the CD tray. LOCATING A PARTICULAR POINT IN A TRACK To Lo
ページ13に含まれる内容の要旨
COMPACT DISC PLAYBACK (CONTINUED) SHUFFLE PLAY - PLAYING IN A RANDOM ORDER IN STOP MODE 1. Press the DISC SKIP button to select a disc. 2.Press the RANDOM button, the word "RANDOM" will appear on the display. TRACK 3. Press PLAY/PAUSE button. Some abnormal symbols will be shown on the display and a short period of time is needed for track shuffling, before playback can be started. RANDO M TRACK Notes: 1. The random function shuffles all the tracks of all discs in the disc tray and randomly se
ページ14に含まれる内容の要旨
COMPACT DISC PLAYBACK (CONTINUED) REPEAT PLAYBACK DURING PLAYBACK MODE To Repeat the Current Track • Press the REPEAT button until REPEAT ONE appears on the display and the currently playing track will be played repeatedly until the STOP button is pressed. SKIP and SEARCH can still be used during this function. SKIP will go to the start of the next track, Reverse Skip will go to the start of the present TRACK REPEAT track, on the second press it will then go to the ONE start of the previous
ページ15に含まれる内容の要旨
COMPACT DISC PROGRAMMED PLAYBACK A program of up to 32 tracks from all the available discs in the disc tray can be played in a preset order. 1. Press the MEMORY/ CLOCK button (in 2.Press the DISC SKIP button to select the stop mode). desired disc (the disc symbol ( ) shows which disc is selected). MEMORY MEMORY TRACK TRACK 3. Press the / SKIP buttons to select the 4.Press the MEMORY/ CLOCK button again to desired track. store this track in memory. MEMORY MEMORY TRACK TRACK 5. To add additi
ページ16に含まれる内容の要旨
STOPPING AND CANCELLING PROGRAMMED PLAYBACK To stop programmed play for a moment: Press the PLAY/PAUSE button and " " will be displayed. Press this button again to resume playing. TRACK To add additional tracks during program playback: Press the STOP button once, press the MEMORY/ CLOCK button until the track indication is "--" and then repeat steps 2 to 4 (Compact Disc Programmed Playback). TRACK To erase the whole program: Also Press the STOP button twice until the word By pres
ページ17に含まれる内容の要旨
REMOTE CONTROL 1. POWER/STANDBY button 2. SOUND (STEREO WIDE) button 3. TIMER button 4. STOP button 5. / SKIP buttons / / PRESET buttons 6. MEM button 7. TUNING /RANDOM button 8. SLEEP button 9. VOLUME +/- buttons 10. FUNCTION button 11. BAND button 12. X-BASS button 13. PLAY/PAUSE button 14. TUNING button 15. OPEN/CLOSE button 16. DISC SKIP button USING THE REMOTE CONTROL CORRECTLY Point the Remote Control at the REMOTE SENSOR located on the unit. When there is a strong ambient light
ページ18に含まれる内容の要旨
MAINTENANCE CLEANING CD If the CD skips or will not play, the disc may need cleaning. Before playing, wipe the disc from the centre out with a cleaning cloth. After playing, store the disc in its case. CLEANING THE UNIT Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. IMPORTANT NOTE Before transporting the unit, take out all discs from the CD tray. TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) GENERAL No sound. Press the VOLUME UP button. The headphon
ページ19に含まれる内容の要旨
SPECIFICATIONS GENERAL Power consumption 100 W Power requirements AC ~ 120V 60Hz Specifications subject to change without advance notice. PRINTED IN CHINA 811-208891-010 - E19 - 2088_eng3.PMD 19 10/29/2004, 2:55 PM
