ページ1に含まれる内容の要旨
™
TriggerLinc
®
INSTEON Wireless Door Window Sensor (Open/Close)
Model : 2421
ページ2に含まれる内容の要旨
TriggerLinc Owner’s Manual TABLE OF CONTENTS ABOUT TRIGGERLINC................................................................................................................................3 Key TriggerLinc Features ..........................................................................................................................3 What is Included with TriggerLinc .............................................................................................................3 WHA
ページ3に含まれる内容の要旨
TriggerLinc Owner’s Manual ABOUT TRIGGERLINC TriggerLinc can wirelessly control lights or appliances throughout your home. Program any INSTEON device to react when the magnetic contact is broken and re-established on TriggerLinc. Useful for doors, windows, drawers, cabinets, or anything else that opens. You can optionally connect an external contact closure sensor of any type (e.g., hidden contacts or doorbell button). Main case Status LED Magnet Indicator arrows
ページ4に含まれる内容の要旨
TriggerLinc Owner’s Manual WHAT IS INSTEON? Since its inception in 2005, INSTEON has become a best-selling home-control networking technology, offering more reliability and flexibility than any other home management system on the market. INSTEON systems are simple, reliable, and affordable. Simple, because each device takes mere minutes to install. Reliable, because every INSTEON device works as a network repeater, ensuring your commands will not be lost. Affordable, because INSTEON c
ページ5に含まれる内容の要旨
TriggerLinc Owner’s Manual INSTALLATION TriggerLinc Hardware Reed Switch Used by TriggerLinc to detect whether the included magnet is within ½ inch of the main case: • Reed switch is in the closed state when the magnet is inside ½ inch • Reed switch is in the opened state when the magnet is further than ½ inch Jumper When the jumper is installed (default), TriggerLinc will send an INSTEON ON command when it opens and an OFF command when it closes. When the jumper is uninstalled
ページ6に含まれる内容の要旨
TriggerLinc Owner’s Manual Installing TriggerLinc 1) RF-only devices require at least one dual-band INSTEON device, such as an Access Point (#2443), for communication. For the best INSTEON network performance, be sure you have properly installed at least two dual-band INSTEON devices. 2) Use a screwdriver to remove the cover of the TriggerLinc main case and install one AA battery (included) 3) Unless the location where you plan to mount TriggerLinc is in direct view of the Status LED on
ページ7に含まれる内容の要旨
TriggerLinc Owner’s Manual CONTROLLING INSTEON RESPONDERS FROM TRIGGERLINC Linking TriggerLinc to an INSTEON Responder In default mode, TriggerLinc will: • Turn on Responders when it opens • Turn off Responders when it closes This mode is ideal for garage doors, closets, sheds, etc., where you want the lights on when door/windows are opened and off when they are closed. If you require more flexible functionality, see Using TriggerLinc’s Multi-Scene Mode. To use TriggerLinc as an IN
ページ8に含まれる内容の要旨
TriggerLinc Owner’s Manual Using TriggerLinc’s Multi-Scene Mode In Multi-Scene Mode, TriggerLinc will: • Activate Scene 1 when it opens • Activate Scene 2 when it closes This mode is ideal when you need more flexibility: • For rooms where you want the lights left on after the door is closed – simply don’t Link any Responders to Scene 2 in this case • Turning lights on at full-bright when a door is opened and dim when the door is closed • Activating two independent scenes when a do
ページ9に含まれる内容の要旨
TriggerLinc Owner’s Manual CREATING INSTEON SCENES INSTEON scenes let you activate dramatic lighting moods with the tap of just one button. For example, you can set all the lights in a scene to dim to 50% or turn certain lights on while turning others off, all with the tap of a button on a Controller. INSTEON scenes are very easy to set up – just Link more than one Responder to the same On/Off or Scene button on a Controller. Then, when you tap any of the Linked buttons on the Controlle
ページ10に含まれる内容の要旨
TriggerLinc Owner’s Manual Resetting TriggerLinc to its Factory Default Settings The factory reset procedure can be used to clear the TriggerLinc memory of all INSTEON Links, etc. 1) If you are using TriggerLinc to control any Responders, Unlink them from TriggerLinc. See Unlinking an INSTEON Responder from TriggerLinc. 2) Use a small screwdriver to gently remove the TriggerLinc main case 3) Remove the battery and wait at least 15 seconds 4) Press & hold the Set button on TriggerLi
ページ11に含まれる内容の要旨
TriggerLinc Owner’s Manual Further Enhancing Reliability As signals travel via the power line or RF throughout the home, they naturally become weaker the farther they travel. The best way to overcome weakened signals is to increase the coverage of the mesh network by introducing more INSTEON devices. It is possible that some audio-video devices, computers, power strips, or other electrical equipment may attenuate INSTEON signals on the power line. You can temporarily unplug suspected d
ページ12に含まれる内容の要旨
TriggerLinc Owner’s Manual Limited Warranty Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if
